Temperature optimization
From Hall A Wiki
Revision as of 18:18, 7 December 2010 by Pzhu (Talk | contribs) (New page: = Goal = To optimize temperature for 3He polarization. = Previous study = summer 2010, using cell Boris, done by John Donaghy et al, note available in paper = current run plan = <p> usi...)
Goal
To optimize temperature for 3He polarization.
Previous study
summer 2010, using cell Boris, done by John Donaghy et al, note available in paper
current run plan
using cell Boris.
use three 30na coherent laser
chose 8 pumping cell temp points from 180 to 250C
Then step by step, we do:
1. adjust ovan to desired temperature and wait for it to be stable, then turn on laser
(laser will heat up, find the ovan temperature relation with desired pumping cell temp)
2. measure NMR every 2 hours for 12 times (1 day), 3He should reach max pol now.
3. measure EPR once.
4. measure AFP loss. turn off laser, measure NMR every 2 minutes for 5 times.
5. measure depolarization. keep laser off, measure NMR every 1 hour for 10 times.
