G2pmagnets
From Hall A Wiki
Revision as of 14:41, 13 April 2012 by Slifer (Talk | contribs) (New page: There is no “regulator” on the septum magnets. You must set each one manually. DO NOT USE "Septum Ramp Controls". Use Septum Right Controls for the right side Use Septum Left Contro...)
There is no “regulator” on the septum magnets. You must set each one manually. DO NOT USE "Septum Ramp Controls". Use Septum Right Controls for the right side Use Septum Left Controls for the left side Use "~adaq/bin/GetSeptaCurrent <P0>" to calculate the current for P0 in GeV.
The correct “tune” for the spectrometers is “g2p/Gep_1” which you’ll see on the regulator
controls page (The button to the right of GeV/c after the P0 set box). This determines the
quadrupole and dipole settings for the spectrometer proper.
Make sure the regulator is ON during normal running.
