Run plan

Run plan with CW beam

• Establish beam on target using BeO target.
  • Move target to BeO
  • Raster off, 5uA current
  • Visual inspection on target camera for spot on BeO target
  • Halog BPMs information
• Spot++
  • Move to carbon target
  • Raster 3x3 mm, 5uA
  • Take LHRS and RHRS runs
  • Do spot++ to look for raster size and beam spot
  • Halog plots of BPMs and raster size

12_GeV_March_2014_running