BigBite Wire Chamber Trip Recover Procedure
From Hall A Wiki
Revision as of 23:08, 1 November 2008 by Xqian (Talk | contribs) (New page: 1. Chamber 1 HV channel: 14.0 14.1 14.2 14.3 2. Chamber 2 HV channel: 14.4 14.5 14.6 14.7 3. Chamber 3 HV channel: 15.0 15.1 15.2 15.3 When the chamber trips, please turn off all the HV c...)
1. Chamber 1 HV channel: 14.0 14.1 14.2 14.3 2. Chamber 2 HV channel: 14.4 14.5 14.6 14.7 3. Chamber 3 HV channel: 15.0 15.1 15.2 15.3
When the chamber trips, please turn off all the HV channels corresponding to that chamber. Wait till all the HV are lower than 500V. Then bring up all HV channels for that chamber to the original value. This can be done by turn on and off the channel in the HV gui!!
