Analysis
From Hall A Wiki
Revision as of 08:34, 9 February 2018 by Jbane (Talk | contribs) (→Calibration and Analysis Task List)
Back to experiments page
Analysis
Calibration and Analysis Task List
Usually presented at the end of a Daily Run Meeting
(All reports should live on the Hall A H3 Elog)
| HRS Timing | Tong | slides |
| BCM Calibration | Nathaly | slides |
| Normalization | Jason | |
| Standard Beam Trip Cut | Nathaly | |
| Clock Counter First Look | Evan | slides |
| Trigger Efficiency | Hanjie | slides |
| BPM Calibration | Jason | Elog Post Slides |
| Raster Calibration | Tyler H | |
| Calorimeter Calibration | Tyler K | |
| Cherenkov Calibration | Hanjie | |
| VDC Calibration | Tong | |
| Scintillator Calibration | Bishnu/Tong | |
| PID/Track Efficiency | Hanjie | |
| FADC vs FastBusADC Check | Hanjie | |
| F1 vs FastBus vs VETROC Check | Marco | |
| Optics | Tong | |
| Target 'Boiling' | Sheren/Nathaly | |
| Target 'Boiling' Time Dependence | Shujie | https://hallaweb.jlab.org/dvcslog/H3/32 |
| Good Electron Counts | Zhihong | |
| Offline Dead-Time Checks | /Jason | Elog Post |
Off-line Info
- Work areas reserved for the tritium experiments
- /volatile/halla/triton
- /work/halla/triton
- You need to be a part of the unix group a-triton to be able to use these disk spaces. Please contact Ole Hansen (ole@jlab.org), the software coordinator for Hall A, to get added to this group.
To-do
- Setup a replay code to do coincidence analysis
- Post all offline analysis results to the [Hall A H3 Elog].
Useful Resources
- Zhihong's github repository for all scripts for HRS detector calibration, Monte Carlo Simulation Tools and cross section models: https://github.com/yezhihong/XGT2
http://rogerdudler.github.io/git-guide/ https://github.com/yezhihong/XGT2/wiki
- SAMC: https://userweb.jlab.org/~yez/SAMC
- XEMC: https://userweb.jlab.org/~yez/XEMC
- DIS Models and MARATHON Rate Calculation Tools: https://userweb.jlab.org/~yez/Work/DIS/
- Getting started with the Hall A C++ analyzer
