RICH pedestal run
From Hall A Wiki
Revision as of 23:40, 12 November 2008 by Cisbani (Talk | contribs) (New page: == How to take a RICH pedestal run == 1. login as a-onl@adaql2 2. go to the directory: '''/adaqfs/home/a-onl/rich/pedestal''' 3. do the command: '''./preped.sh''' 4. prescale all trig...)
How to take a RICH pedestal run
1. login as a-onl@adaql2
2. go to the directory: /adaqfs/home/a-onl/rich/pedestal
3. do the command: ./preped.sh
4. prescale all trigger except T3 and T5
5. run a standard calibration run in TwoArmRICH (comment as RICH pedestal), deadtime should be rather high (80-90%)
6. take about 5000 events
7. login as adaq@adaql2
9. go to the directory: /adaqfs/home/adaq/e06010/rich/leftreplay
10. run analyzer
11. within analyzer lead: .L newdecodeRICH.C
12. then run: newdecodeRICH(####,2000,0,2) where #### = number of the pedestal run
13. go back a-onl@adaql2 in the directory /adaqfs/home/a-onl/rich/pedestal
14. do the command> ./copyped.sh
15. you can now start the production; do not forget to set the prescalers correctly
