Meeting solid preRD cher

Meeting time is 11:00 AM EST on Mondays. The Bluejeans link is: https://bluejeans.com/758541689

• Zhiwen's studies of readout test (updating from time to time) https://userweb.jlab.org/~zwzhao/maroc/mapmt_readout_1st_test.pdf

Monday, December 9th, 2017

List of topics for meeting today:

• Engineering status
  • Updates on Tank Construction
    • Is there adequate space in the current design for the scintillator arrays. Cradle space in design?
  • Updates on Stand Construction

• Outstanding items that need to be ordered/built/procured
  • Status of current orders:
    • MaPMTs
    • Mirrors
    • Electronic summing board board
      • Use MCX connectors with MCX to BNC conversion cables? $2400 total cost on entire MCX to BNC out, saves time on assembly/labor.
    • MAROC electronics
    • Gas regulation system
  • Status of lead block availability at JLab?
  • Status of lemo cable availability at JLab?
  • Status of BNC cable availability at JLab?

• Preparation of Cosmics test.
  • Space at the lab?
  • Electronics and cables ready?
  • Schedule for bench testing calorimeter blocks and scintillators.

• MaPMT pixel test with wavelength shifter coating

• Documentation for device
  • Status of SOW's for Argonne
  • Safety documentation for JLab
  • Alignment, calibration, and commissioning procedures.
  • Heavy gas fill procedure
  • Run Plan
  • Kinematics switch timeline/plan

Monday, November 11th, 2017

• Mark's pictures of the target from various spots in the hall File:Marks pictures of target.pdf

• Some design pictures from Ed are below:

Fig. 1: Initial work on Prototype Tank

Fig. 2: Schematic of blank circular flange

Fig. 3: Design for tank housing, with flange attachment possibilities

'Fig. 4: Schematic of circular flange with 80 BNC and 16 SVH feedthroughs

Fig. 5: Schematic of square flange option

Fig. 6: Image of square flange option

Fig. 7: Alternate view image of square flange option