DVCS/RasterCalibration

From Hall A Wiki
Revision as of 18:23, 1 October 2010 by Munoz (Talk | contribs) (New page: == Goal: == Calibrate raster size between MCC readings and spot++ == Procedure: == Vary raster size and do spot++ at each setting == Step-by-step instructions == <ol> <li> IMPORTANT: ...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Goal:

Calibrate raster size between MCC readings and spot++

Procedure:

Vary raster size and do spot++ at each setting

Step-by-step instructions

  1. IMPORTANT: Make sure you do all the procedure on EMPTY TARGET
  2. Ask MCC a raster size corresponding to the setting (see list below)
  3. Once raster established, start a CODA run for about 5min.
  4. Run spot++ and log results together with run number
  5. Proceed to next raster setting

List of settings:

  • 3x2
  • 7x5
  • 10x8

Make a halog entry summarizing the results. For each setting log:

  • Requested setting (eg. 3x2)
  • CODA run number
  • spot++ results
Retrieved from "https://hallaweb.jlab.org/wiki/index.php?title=DVCS/RasterCalibration&oldid=7601"