Test
You are welcome to test Wiki editing on this page!
Test Here
color
Motor ID | Controller ID | Description | Alignment Angle/Degree | Auto calibration Error/Degree | Spin Up Read Back/Degree | Spin Down Read Back/Degree |
---|---|---|---|---|---|---|
1 | N/A | Not In Use | 8.4 | 0.15 | 8.25 | -81.75 |
2 | N/A | Not In Use | 8.5 | 0.40 | 8.10 | -81.90 |
3 | 0338 | Transverse S Wave | 7.5 | 0.2 | 7.3 | -82.70 |
4 | 1474 | Transverse P Wave | 8.8 | 0.00 | 8.80 | -81.20 |
5 | 1426 | Vertical S Wave | 10.8 | 0.40 | 10.40 | -79.60 |
6 | 1423 | Vertical P Wave | 9.8 | 1.00 | 8.80 | -81.20 |
- Motor ID : The sticker attached to the motor
- Controller ID : ID number of control connected to the motor
- Alignment Angle : When the mark of Q-wave plate is at this angle, all plates will convert a vertical polarized laser to a circular polarized one. Besides, the polarization direction is the same.
- Auto calibration error : is the marker angle on the plate holder, while the holder is shown to be rotated to 0 degree on the computer. The reason why it is not 0, is due to non-perfect precision of automatic calibration.
- Position Up/Down Read Back: The angle setting on the computer for spin state Up/Down.
{| class="wikitable sortable" border="1" frame="hsides" rules="rows" |- ! Motor ID ! Controller ID ! Description ! Alignment Angle/Degree ! Auto calibration Error/Degree ! Spin Up Read Back/Degree ! Spin Down Read Back/Degree |- |1|| N/A || Not In Use || 8.4||0.15||8.25||-81.75 |- |2|| N/A || Not In Use || 8.5||0.40||8.10||-81.90 |- |3|| 0338 || Transverse S Wave || 7.5||-1.50||6.5 (Dec 02, 2008 re-calib)||-83.5 (Dec 02, 2008 re-calib) |- |4|| 1474 || Transverse P Wave || 8.8||0.00||6.5 (Dec 02, 2008 re-calib)||-83.5 (Dec 02, 2008 re-calib) |- |5|| 1426 || Vertical S Wave || 10.8||0.40||10.40||-79.60 |- |6|| 1423 || Vertical P Wave || 9.8||1.00||8.80||-81.20 |}
- Motor ID : The sticker attached to the motor
- Controller ID : ID number of control connected to the motor
- Alignment Angle : When the mark of Q-wave plate is at this angle, all plates will convert a vertical polarized laser to a circular polarized one. Besides, the polarization direction is the same.
- Auto calibration error : is the marker angle on the plate holder, while the holder is shown to be rotated to 0 degree on the computer. The reason why it is not 0, is due to non-perfect precision of automatic calibration.
- Position Up/Down Read Back: The angle setting on the computer for spin state Up/Down.
{| class="wikitable sortable" border="1" frame="hsides" rules="rows" |- ! Motor ID ! Controller ID ! Description ! Alignment Angle/Degree ! Auto calibration Error/Degree ! Spin Up Read Back/Degree ! Spin Down Read Back/Degree |- |1|| N/A || Not In Use || 8.4||0.15||8.25||-81.75 |- |2|| N/A || Not In Use || 8.5||0.40||8.10||-81.90 |- |3|| 0338 || Transverse S Wave || 7.5||-1.50||9.00||-81.00 |- |4|| 1474 || Transverse P Wave || 8.8||0.00||8.80||-81.20 |- |5|| 1426 || Vertical S Wave || 10.8||0.40||10.40||-79.60 |- |6|| 1423 || Vertical P Wave || 9.8||1.00||8.80||-81.20 |}
- Motor ID : The sticker attached to the motor
- Controller ID : ID number of control connected to the motor
- Alignment Angle : When the mark of Q-wave plate is at this angle, all plates will convert a vertical polarized laser to a circular polarized one. Besides, the polarization direction is the same.
- Auto calibration error : is the marker angle on the plate holder, while the holder is shown to be rotated to 0 degree on the computer. The reason why it is not 0, is due to non-perfect precision of automatic calibration.
- Position Up/Down Read Back: The angle setting on the computer for spin state Up/Down.
qwerwqerwqerqwerwqerwqer
qwerwqerwqer
qwerwqerwqer
qwerwqerwqerqwerwqerwqerqwerwqerwqerqwerwqerwqerqwerwqerwqer
qwerwqerwqer
qwerwqerwqer
qwerwqerwqerqwerwqerwqerqwerwqerwqerqwerwqerwqerqwerwqerwqer
qwerwqerwqer
qwerwqerwqer
qwerwqerwqerqwerwqerwqerqwerwqerwqerqwerwqerwqerqwerwqerwqer
qwerwqerwqer
qwerwqerwqer
qwerwqerwqerqwerwqerwqerqwerwqerwqerqwerwqerwqerqwerwqerwqer
qwerwqerwqer
qwerwqerwqer
qwerwqerwqerqwerwqerwqerqwerwqerwqer