Difference between revisions of "BigBite/RemoteCrateReset"

Revision as of 13:35, 3 April 2008

Remote Crate Resets

There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC6, ROC7, ROC9, ROC10).

TS12

• Type "reboot" in the portserver terminal window
• Direct a webbrowser to hareboot30, and perform an "Immediate Reboot".

ROC5

• Type "reboot" in the portserver terminal window
• Direct a webbrowser to bbspare2..
  • click on "MAIN POWER" to turn off the crate.
  • click on "MAIN POWER" again to turn it back on.
• Direct a webbrowser to hareboot26, and perform an "Immediate Reboot".

ROC6/ROC7

• Type "reboot" in the portserver terminal window
• Direct a webbrowser to hareboot28, and perform an "Immediate Reboot".

ROC8/ROC9/ROC10

• Type "reboot" in the portserver terminal window
• Log into an adaq machine using the adaq account... e.g.

[adaq@adaql4 adaq]$ ssh adaq@adaql1

Run "crate_reset. e.g.

[adaq@adaql1 adaq]$ crate_reset
USAGE: /adaqfs/home/adaq/brad/camac_control/crate_reset [options] <rocID> [<rocID> ... ]
  -v     verbose.
  -h     This help text.
---
 rocID   Channel   Description
 -----   -------   -----------
 roc10     10      Lower FASTBUS TDC crate
 roc8       8      FASTBUS ADC crate
 roc9       9      Upper FASTBUS TDC crate
 ts2        2      Electron Trigger Supervisor
---
 Using controller IP: bbcamac1.jlab.org.  I/O reg in slot 11
 Using cnaf command:  './cnafb'