Difference between revisions of "Crate resets"

From Hall A Wiki
Jump to: navigation, search
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[BigBite_trigger_and_DAQ]]
 
[[BigBite_trigger_and_DAQ]]
  
*VXS crates power supplies controls
+
*VXS crates power supplies controls (open in browser on VNC)
 
**http://hcalvxs1.jlab.org HCAL bottom crate
 
**http://hcalvxs1.jlab.org HCAL bottom crate
 
**http://hcalvxs2.jlab.org HCAL top crate
 
**http://hcalvxs2.jlab.org HCAL top crate
Line 9: Line 9:
 
**http://hallavme12.jlab.org BB GEM crate
 
**http://hallavme12.jlab.org BB GEM crate
 
**http://grinchvxs.jlab.org GRINCH crate
 
**http://grinchvxs.jlab.org GRINCH crate
 +
**http://lefthrsvxs.jlab.org HRS crate
  
  
Line 31: Line 32:
 
***[https://sbs.jlab.org/wiki/index.php/GRINCH_LED_Pulser GRINCH LED pulser switch 8]
 
***[https://sbs.jlab.org/wiki/index.php/GRINCH_LED_Pulser GRINCH LED pulser switch 8]
 
**[https://sbs.jlab.org/wiki/index.php/Remote_Power_Cycling Detailed Instructions on Power Cycling + hareboot14 Device List]
 
**[https://sbs.jlab.org/wiki/index.php/Remote_Power_Cycling Detailed Instructions on Power Cycling + hareboot14 Device List]
 +
**http://129.57.188.119
 +
***enpcamsonne PC port 4
 +
***HCal/BBCal Threshold Readback rpi port 8
  
 
*Portservers
 
*Portservers

Latest revision as of 14:12, 18 May 2022

BigBite_trigger_and_DAQ


  • CAEN crate'
    • ssh sbs-onl@intelbbmpd
    • type minicom, if error do a "killall minicom" wait a minute and try again
    • tyoe CAEN
    • choose c
    • turn off and on the crate
    • exit from menu


  • Portservers
    • bbps1
      • port 3 sbsvtp1
      • port 4 sbsvtp3
  • INFN GEM LV
    • The INFN low voltage is accessible by browser. This low voltage control has two channels: channel 1 controlslayer J0, and channel 2 controls layer J2. The operation manual for the low voltage power supply, whichincludes a remote control command list, can be found: CPX400DP.The following instructions can be usedto access the INFN low voltage power supply:1. Open a firefox browser (from network)2. In address bar, type: 129.57.188.51 (for BigBite LV supply)3. Click on Instrument Control4. TypeOPALL 0to turn off. TypeOPALL 1to turn on