Difference between revisions of "DVCS3 DAQ"
From Hall A Wiki
(→Stress test) |
(→Stress test) |
||
| Line 88: | Line 88: | ||
<td>716.0</td> | <td>716.0</td> | ||
<td>1</td> | <td>1</td> | ||
| − | <td>15: | + | <td>15:00(rest.15:26)</td> |
<td></td> | <td></td> | ||
<td></td> | <td></td> | ||
Revision as of 16:30, 6 November 2014
ROC info
Please see https://logbooks.jlab.org/entry/3292168 for information.
| Model | Mac1 | location | Hostname | IP Adress | ROC Hardware ID | CODA ROC |
|---|---|---|---|---|---|---|
| VME | 002038046D12 | LHRS DVCS crate 1 | intelhadvcs1 (ROC27) | 129.57.192.80 | 4 | 27 |
| VME | 002038046DC1 | LHRS DVCS crate 2 | intelhadvcs2 (ROC28) | 129.57.192.86 | 6 | 28 |
| VME | 0020CEF603EA | LHRS DVCS crate 3 | intelhadvcs3 (ROC29) | 129.57.192.91 | 5 | 29 |
| VME | 002038046D0C | LHRS DVCS crate 4 | intelhadvcs4 (ROC30) | 129.57.192.92 | 0 | 30 |
| VME | Upper level crate | intelha3 | 7 |
Stress test
- To run the analysis, on alternating aonl machines: "godvcs", "analyzer", ".L replay_DVCS.C", " replay_DVCS(run_number)".
- MSS storage: /mss/halla/dvcs/raw/dvcs14*
- to check the disk occupency: as adaq@adaq1, "df -k /adaq1/data1/*"
- Analyze deadtime on any aonl machines: "godvcs", "cd marco/deadtime/", "analyzer", ".L deadtime.C", "deadtime(run_number)".
| run number | DAQ start/stop time | DAQ rate TS11 (Hz) | DAQ rate ROC27 (Hz) | Analysis ran on wich aonl? | Analysis start/stop time | Analysis rate (Hz) | Time at end of copy of mss | Occupency of the data disk at end of data taking | Marco's awesome plot | Prescale |
| 2666 | 12:43/13:48 | 836.7 | N/A | 4 | 13:42 | 0.29 | 4 | |||
| 2667 | 13:51/14:20 | 850.0 | N/A | 3 | 14:39(rest.) | 0.3 | 4 | |||
| 2669 | 14:25/14:55 | 720.0 | 700.0 | 2 | 14:39 | 0.31 | 1 | |||
| 2670 | 14:56/ | 752.0 | 716.0 | 1 | 15:00(rest.15:26) | 1 | ||||
