Difference between revisions of "Docs"

From Hall A Wiki
Jump to: navigation, search
(Manuals/Spec sheets for components of hodoscope)
(General Documents)
Line 3: Line 3:
 
*Software requirements, R. Montgomery et al. [[https://hallaweb.jlab.org/wiki/images/1/1e/BB_TH_Software_Requirements.pdf]]
 
*Software requirements, R. Montgomery et al. [[https://hallaweb.jlab.org/wiki/images/1/1e/BB_TH_Software_Requirements.pdf]]
 
*High voltage and low voltage set up and operation for hodoscope in TEDf with cosmics, J. Annand et al. [[https://hallaweb.jlab.org/wiki/images/7/7f/BBLVHV.pdf]]
 
*High voltage and low voltage set up and operation for hodoscope in TEDf with cosmics, J. Annand et al. [[https://hallaweb.jlab.org/wiki/images/7/7f/BBLVHV.pdf]]
*Original electronics plan (describes chain from PMT to final VME readout, including high voltage and low voltage)[[https://hallaweb.jlab.org/wiki/images/e/e0/BBelect.17.07.19.pdf]]
+
*Original electronics plan, J. Annand et al. (describes chain from PMT to final VME readout, including high voltage and low voltage)[[https://hallaweb.jlab.org/wiki/images/e/e0/BBelect.17.07.19.pdf]]
 
*Scintillator bar and light guide surface roughening tests in Glasgow 2020, R. Montgomery et al. [[https://hallaweb.jlab.org/wiki/images/b/ba/Roughening_Glueing_May2020.pdf]]
 
*Scintillator bar and light guide surface roughening tests in Glasgow 2020, R. Montgomery et al. [[https://hallaweb.jlab.org/wiki/images/b/ba/Roughening_Glueing_May2020.pdf]]
  

Revision as of 18:12, 8 February 2021

General Documents

  • BigBite Timing hodoscope Technical Specifications (design and performance requirements), J. Annand et al. [[1]]
  • Software requirements, R. Montgomery et al. [[2]]
  • High voltage and low voltage set up and operation for hodoscope in TEDf with cosmics, J. Annand et al. [[3]]
  • Original electronics plan, J. Annand et al. (describes chain from PMT to final VME readout, including high voltage and low voltage)[[4]]
  • Scintillator bar and light guide surface roughening tests in Glasgow 2020, R. Montgomery et al. [[5]]

Mapping Documents

  • Updated mapping for cosmics running 2021 currently in preparation
  • High voltage and low voltage mapping up to Feb 2019 description (layout OUTDATED, will remove when new mapping uploaded) [[6]]
  • Accompanying high voltage and low voltage mapping up to Feb 2019 excel sheet (layout OUTDATED, will remove when new mapping uploaded) [[7]]

Schematics

  • HV patch panels, J. Annand, A. Clarkson [[8]]
  • Schematic for LV distributor panel is found in figure 5 of "Original electronics plan" document listed in general documents above
  • Schematic for PMT bases is found in figure 3 of "Original electronics plan" document listed in general documents above
  • Schematic of NINO front end cards is found in figure 4 of "Original electronics plan" document listed in general documents above

Manuals/Spec sheets for components of hodoscope

  • Electron Tubes ET9124 SB type PMTs [[9]]
  • Eljen Technology EJ200 scintillator bars [[10]]
  • Eljen technology UVT acrylic light guides [[11]]
  • DYMAX optical cure epoxy - check which specific model number was used in Jlab repairs
  • Cage HV connectors at HV patch panel connections [[12]]
  • CAEN V792 [[13]]
  • CAEN V1190 [[14]]
  • CAEN SY1527LC HV mainframe, 19" wide, 8U [[15]]
  • CAEN A1932AN 48 channel HV distributer modules - these manuals on CAEN website are corrupted - investigating
  • CAEN A1531 primary PSU for HV mainframe
  • AGILENT N5761A DC power supply unit for NINO front end cards, 19" wide, 1U,, rack-mountable [[16]]
  • Wiener 6U VME64x 6023 crate [[17]]