# Difference between revisions of "G2p Analysis Minutes"

Line 2: | Line 2: | ||

---- | ---- | ||

[https://hallaweb.jlab.org/wiki/index.php/G2p_Weekly_Analysis Agenda] | [https://hallaweb.jlab.org/wiki/index.php/G2p_Weekly_Analysis Agenda] | ||

+ | |||

+ | ==6/8/2016== | ||

+ | |||

+ | Present: JP, Karl, Alex, Ryan, Toby, Chao, Jie, Vince, Ellie <br> | ||

+ | |||

+ | '''Feature Presentations:''' | ||

+ | |||

+ | *Ryan | ||

+ | Gave an update on the radiation length calculation. He checked the energy loss calculation people did before and found out that we did not use the He bag during the experiment but before people built the He bag in the simulation. However the difference between He and air should not cause serious problem for us. More details can be seen in his slides [https://userweb.jlab.org/~rbziel/Weekly_Meetings/g2p_060816.pdf here]. | ||

+ | |||

+ | *Jie | ||

+ | Gave an update on the beam position problem. He worked together with Pengjia on this problem. The bpm database is updated so that the beam current dependence of the BPM is removed. Another problem is that the reported beam position would jump suddenly within the same momentum setting. Pengjia and he guess the pedestal of the BPM might be a possible reason. And between the two run they compared, a carbon cover was added which might influence the pedestal. So they did some study of the BPM pedestal values. The current cut Pengjia used before to select no-beam events is replaced by a more tight one. However, the results do not change much. More details can be seen in his slides [http://hallaweb.jlab.org/experiment/g2p/collaborators/jie/2016_0608_pedstal/yields_update_20160608.pdf here]. | ||

+ | |||

==5/25/2016== | ==5/25/2016== | ||

Line 19: | Line 32: | ||

'''Feature Presentations:''' | '''Feature Presentations:''' | ||

− | * | + | *Chao |

Gave an update of the acceptance study. He used the elastic scattering data to calibrate the resolution of the simulation. He found that the simulation package does not treat the resolution of the beam position properly. Thus the simulation package is updated to generate the events according to the beam profile. With this new update, the resolution of the simulation agrees with the data. More details can be seen in his slides [http://hallaweb.jlab.org/experiment/g2p/collaborators/chao/20160518/Chao_WeeklyMeeting_05182016.pdf here]. | Gave an update of the acceptance study. He used the elastic scattering data to calibrate the resolution of the simulation. He found that the simulation package does not treat the resolution of the beam position properly. Thus the simulation package is updated to generate the events according to the beam profile. With this new update, the resolution of the simulation agrees with the data. More details can be seen in his slides [http://hallaweb.jlab.org/experiment/g2p/collaborators/chao/20160518/Chao_WeeklyMeeting_05182016.pdf here]. | ||

## Revision as of 07:11, 11 June 2016

Minutes of the weekly analysis meetings

## Contents

- 1 6/8/2016
- 2 5/25/2016
- 3 5/18/2016
- 4 5/11/2016
- 5 4/20/2016
- 6 4/13/2016
- 7 4/6/2016
- 8 3/23/2016
- 9 3/9/2016
- 10 2/24/2016
- 11 2/17/2016
- 12 2/10/2016
- 13 2/3/2016
- 14 1/26/2016
- 15 1/12/2016
- 16 Jul-Dec 2015
- 17 Jan-Jun 2015
- 18 Jul-Dec 2014
- 19 Jan-Jun 2014
- 20 Jun-Dec 2013
- 21 Jan-May 2013
- 22 April-Dec 2012
- 23 Jan-Mar 2012
- 24 Jul-Dec 2011
- 25 Jan-Jun 2011

## 6/8/2016

Present: JP, Karl, Alex, Ryan, Toby, Chao, Jie, Vince, Ellie

**Feature Presentations:**

- Ryan

Gave an update on the radiation length calculation. He checked the energy loss calculation people did before and found out that we did not use the He bag during the experiment but before people built the He bag in the simulation. However the difference between He and air should not cause serious problem for us. More details can be seen in his slides here.

- Jie

Gave an update on the beam position problem. He worked together with Pengjia on this problem. The bpm database is updated so that the beam current dependence of the BPM is removed. Another problem is that the reported beam position would jump suddenly within the same momentum setting. Pengjia and he guess the pedestal of the BPM might be a possible reason. And between the two run they compared, a carbon cover was added which might influence the pedestal. So they did some study of the BPM pedestal values. The current cut Pengjia used before to select no-beam events is replaced by a more tight one. However, the results do not change much. More details can be seen in his slides here.

## 5/25/2016

Present: JP, Alex, Ryan, Toby, Chao, Jie, Vince, Ellie

**Feature Presentations:**

- Toby

Gave an update of his study on the scattering angle. The problem he mentioned on 5/11 has been solved. Both of the formulas are correct. However, he found that the central scattering angle jumped within one momentum setting for more than 3 deg. Chao mentioned that his calculation result does not show this behavior and they will discuss this offline. More details can be seen in his slides here.

## 5/18/2016

Present: JP, Karl, Alex, Ryan, Toby, Chao, Jie, Vince, Ellie

**Feature Presentations:**

- Chao

Gave an update of the acceptance study. He used the elastic scattering data to calibrate the resolution of the simulation. He found that the simulation package does not treat the resolution of the beam position properly. Thus the simulation package is updated to generate the events according to the beam profile. With this new update, the resolution of the simulation agrees with the data. More details can be seen in his slides here.

## 5/11/2016

Present: JP, Karl, Alex, Ryan, Toby, Jie, Vince, Ellie

**Feature Presentations:**

- Toby

Gave an update of the scattering angle calculation. He used two formulas from Pengjia and Chao to calculate the scattering angle and suggests that the results do not agree. People suggests that this two methods are equivalent and we should just use one of them. More details can be seen in his slides here.

- Ryan

Gave an update of his study of the scattering angle dependence of the cross-section. He used the radiated Bosted model and calculated the cross-sections with three different scattering angle. And the results shows ~20% difference. More details can be seen in his slides here.

- Jie

Gave an update on his study of the yield drift problem. He is still working together with Pengjia to correct the beam current dependence of the beam position. He summarized the beam current distribution for all production runs and found that ~90% of our data was taken with current less than 50 nA, where the beam position need to be corrected. He also studied the "sudden jump" of the beam position which means that the BPMA and BPMB readout did not changed much but the reported beam position changed a lot. It probably could be explained by the pedestal change but still need more study. More details can be seen in his slides here.

## 4/20/2016

Present: JP, Karl, Alex, Chao, Ryan, Toby, Jie, Vince, Ellie

**Feature Presentations:**

- Ryan

Gave an final update of the nitrogen cross-section study of the saGDH experiment. The radiative correction is done and the uncertainty carry-over from the elastic tail analysis is 1.5%. The radiative correction is calculated in two different way: the classic unfolding and the ratio of un-radiated and radiated Bosted model. He also did a bin center correction and compared the result with Vince's calculation. Two methods agrees at a 1-2% level. The radiative corrected cross-section for each kinematics setting is summarized in his slides and he will prepare a tech note for the analysis. More details can be seen in his slides here.

## 4/13/2016

Present: Karl, Chao, Ryan, Toby, Jie, Vince, Ellie

**Feature Presentations:**

- Jie

Gave an update on his study of the yield drift problem. Last time he showed some plots which indicates that the beam position might not be accurate and he did some study on this problem. He found out that the BPM readout shows some linear relations with the beam current. After carefully check the data, it seems that only the BPM B have this correlation. And this problem could be found in all beam energy settings. The uncertainty of beam position is very large if this problem is not corrected. More details can be seen in his slides here.

- Ryan

Gave an correction to his presentation on last week. He mentioned there was a mistake when he compared the formulation for the full internal bremsstrahlung tail and the angle-peaking approximation. And the results agree after the mistake was corrected. More details can be seen in his slides here.

## 4/6/2016

Present: JP, Karl, Chao, Ryan, Toby, Jie, Vince, Ellie

**Feature Presentations:**

- Ryan

Gave an update on his radiative correction study. He already studied the uncertainty for the elastic tail and he continued his study with the inelastic radiative correction. He explained how the angle approximation was applied in the internal bremsstrahlung. There is an equivalent correction in the angel approximation which is dropping the soft photons compare with doing a full integration. Difference between these two calculation is 5-10% for proton. He is still working on applying the calculation to other nuclei like Nitrogen. More details can be seen in his slides here.

- Toby

Gave an update on the his calculation of the asymmetry and cross-section. He applied the dilution factor calculated from the data to the asymmetry calculation. On the other side, he also applied the radiative correction factor calculated from the MAID model to the asymmetry calculation. He then applied the same factors to the cross-section calculation and got the cross-section and cross-section differences. The dilution seems not continuous and JP suggests to do a deeper study for each momentum in the longitudinal setting to understand what is the reason, for example the yield problem studied by Jie. More details can be seen in his slides here.

## 3/23/2016

Present: JP, Karl, Chao, Ryan, Toby, Jie, Vince, Ellie

**Feature Presentations:**

- Jie

Gave an update on his study of the yield drift problem. He continued his study with dilution runs. The method he used is similar as what he did for the production runs. He made a 6mm radius circle cut and compare the simulation result with the data. There are a few runs which were measured with beam current less than 50nA. After discussion with Pengjia, Jie mentioned that those runs' BPM readout might not be accurate since the BPM is calibrated at 50nA~100nA. He will do further study together with Pengjia to understand this effect. More details can be seen in his slides here.

## 3/9/2016

Present: JP, Karl, Chao, Ryan, Toby, Jie, Vince, Ellie

**Feature Presentations:**

- Toby

Gave an update on the dilution study. He summarized the dilution calculation for the 2.2GeV 5T transverse settings. He also used the dilution result to calculate the asymmetry for this setting. The radiative correction was considered in the calculation. And he concluded that the uncertainty of the calculation is dominated by the packing fraction uncertainty. More details can be seen in his slides here.

- Ryan

Gave an update on his cross-section analysis of the small angle GDH data. Based on the discussion from previous meetings, he checked the uncertainty of the elastic tail. The calculation includes three different sources: the correction factor representing higher order virtual photon diagrams, bremsstrahlung and multiple photon corrections. For the multiple photon corrections, he mentioned that G.Miller has an alternative multiple photon correction result. He applied the calculation to the saGDH data and it seems that the Miller multiple photon result is better representation of saGDH elastic tails. More details can be seen in his slides here.

- Jie

Gave an update on his study of the yield drift problem. He and Pengjia fixed the problem in the raster size calculation. He then made some cuts on the raster size to remove the boundary effect. He mentioned some of the runs had hot spot and was able to be corrected by the raster cut. He also summarized the yield spread with raster cuts for all kinematic settings. More details can be seen in his slides here.

## 2/24/2016

Present: Karl, Chao, Ryan, Toby, Min, Ellie, Jie

**Feature Presentations:**

- Toby

Gave an update on the dilution study. He need the scattering angle to calculate the scaling factor between the carbon and nitrogen. However, his study suggests that the scattering angle calculated for the carbon target is larger than the production target. The simulation shows opposite result which is expected to be reasonable from geometries. People suggests Chao to check the scattering angle calculation in the optics package. More details can be seen in his slides here.

## 2/17/2016

Present: JP, Jixie, Chao, Ryan, Min, Ellie, Jie

**Feature Presentations:**

- Chao

Gave an update on the optics study. He finished the matrix recalibration on right arm. The database is updated and is ready to use. The RMS values for angle and momentum calibration are summarized in his presentation. JP and Jixie has some concern about the broken septa seems to cause worse effect on left arm comparing with right arm. They suggested to check this more carefully. More details can be seen in his slides here.

- Ryan

Gave an update on his cross-section analysis of the small angle GDH data. Based on the discussion from the last week's meeting, he removed the extrapolation part in RADCON and then test the code with some test cross-sections from Pbosted Model. There is no problem in this case. So he compared the Pbosted model with saGDH data at large <math>\nu</math>. He is waiting for the response from Vince about the uncertainty of the saGDH cross-section at large <math>\nu</math>. More details can be seen in his slides here.

## 2/10/2016

Present: JP, Karl, Alex, Jixie, Toby, Chao, Ryan, Min, Ellie, Vince

**Feature Presentations:**

- Ryan

Gave an update on his cross-section analysis of the small angle GDH data. He is dealing the problem that after doing the tail subtraction and radiative correction the cross sections go negative at high <math>\nu</math>. He did a refit of the few low <math>Q^2</math> points using a charge form factor fit. The results still deviated from the PBosted model at high <math>\nu</math>. However, JP and Karl suggests that the code RADCOR code should not give negative cross section result. There might be some problems in the extrapolation part. Karl suggests to check the input data to see if there are constrains at the high <math>\nu</math> region. More details can be seen in his slides here.

## 2/3/2016

Present: JP, Karl, Alex, Jixie, Toby, Jie, Chao, Ryan, Ellie, Vince

**Feature Presentations:**

- Min

Gave an update on her acceptance study. She continued to compare the simulation result with data. Since the optics database is updated with the vertical beam position correction. The result suggests that the delta distribution is improved however the phi distribution still shows large discrepancy. She used this result to calculate the acceptance factor and applied it to the cross-section calculation. The result shows a factor of two difference. JP suggests that the acceptance calculated from the compare between the simulation and the data could still be influenced by the cross-section difference at small scattering angle. More details can be seen in her slides here.

- Toby

His presentation on 1/12 is reviewed. JP mentioned his concern about the uncertainty propagation. Toby is going to check it again and update his tech note about it.

**General Discussion:**

- The replay package is restored on the work disk.
- Toby will talk to Melissa and take over her packing fraction study.

## 1/26/2016

Present: Jixie, JP

By Phone: Jie, Chao, Ryan, Ellie

**General Discussion:**

- The analysis meeting will be moved back to
**10 am Wednesday**starting from next week. - There is no meeting room available thus everyone will join by bluejeans. The meeting ID is 4828802914.

## 1/12/2016

Present: Melissa, Jixie

By Phone: Jie, Chao, Ryan, Toby, Ellie

**Feature Presentations:**

- Ryan

Gave an update on his cross-section analysis of the small angle GDH data. yield study using simulation. He is working on the problem that after doing the tail subtraction and running the inelastic Radiative Correction code the fully corrected cross sections go negative at high <math>\nu</math>. To solve this, he did a fit on the Nitrogen form factor. During the fitting, two models is considered: the oscillator model and the Fermi Model and the Fermi Model is proved to be better. He will complete the calculation of the elastic tail by using the form factor in a few weeks. More details can be seen in his slides here.

- Toby

Gave an review on the polarization uncertainty estimation. He claimed that the reason of the small uncertainties for the target polarization is because we took large amount of TE for each material. Thus the uncertainty of the calibration constant is reduced by average. Jixie suggests that the error propagation still need to be carefully checked. More details can be seen in his slides here

**General Discussion:**

- Chao updated his optics technical note.
- There is no meeting next week due to the Hall A collaboration meeting.