Difference between revisions of "HV Control GUI"

From Hall A Wiki
Jump to: navigation, search
(changed adaq computer name to remove the "l" as they are now adaq1,adaq2)
(Updated instructions for GSO detector)
Line 2: Line 2:
  
  
# Log on to ''adev@adaq1'' or ''adev@adaq2''.
+
# Log on to ''aslow@adaqsc''
 
# ''cd slowc''
 
# ''cd slowc''
 
# ''./hvs BEAMLINE''
 
# ''./hvs BEAMLINE''
Line 9: Line 9:
 
This will start the GUI. Available channels should say "S1, S5, S6, S9, S12". Navigate to the table and select a channel. ''Make sure you know the desired voltage before proceeding.'' Check the box to enable, then click the HV On/Off on the left, if it is not already active.
 
This will start the GUI. Available channels should say "S1, S5, S6, S9, S12". Navigate to the table and select a channel. ''Make sure you know the desired voltage before proceeding.'' Check the box to enable, then click the HV On/Off on the left, if it is not already active.
  
Currently, we are working only with '''Slot 12, Channel 11, set to about -1690V'''. (desired voltage as of 2016-11-10)
+
These Photon Detector channels are for PREX/CREX running conditions:
 +
{| class="wikitable"
 +
!
 +
! Slot
 +
! Channel
 +
! HV
 +
|-
 +
| GSO (PhDetector)
 +
| SL-12
 +
| CH-11
 +
| -1700 V
 +
|-
 +
| Side Finger
 +
| SL-6
 +
| CH-10
 +
| -xxxx V
 +
|-
 +
| Top Finger
 +
| SL-6
 +
| CH-11
 +
| -xxxx V
 +
|}
 +
 
 +
Return to [[Compton]]
 +
 
 +
'''OLD INSTRUCTIONS'''
 +
 
 +
# Log on to ''adev@adaq1'' or ''adev@adaq2''.
 +
# cd slowc
 +
# ./hvs BEAMLINE
  
 +
Old channel for PbWO4: Slot 12, Channel 11, set to about -1690V. (desired voltage as of 2016-11-10 to 2016-12-31)
  
 
Return to [[Compton]]
 
Return to [[Compton]]

Revision as of 12:20, 23 January 2019

This GUI is used to enable/set particular voltage channels remotely.


  1. Log on to aslow@adaqsc
  2. cd slowc
  3. ./hvs BEAMLINE


This will start the GUI. Available channels should say "S1, S5, S6, S9, S12". Navigate to the table and select a channel. Make sure you know the desired voltage before proceeding. Check the box to enable, then click the HV On/Off on the left, if it is not already active.

These Photon Detector channels are for PREX/CREX running conditions:

Slot Channel HV
GSO (PhDetector) SL-12 CH-11 -1700 V
Side Finger SL-6 CH-10 -xxxx V
Top Finger SL-6 CH-11 -xxxx V

Return to Compton

OLD INSTRUCTIONS

  1. Log on to adev@adaq1 or adev@adaq2.
  2. cd slowc
  3. ./hvs BEAMLINE

Old channel for PbWO4: Slot 12, Channel 11, set to about -1690V. (desired voltage as of 2016-11-10 to 2016-12-31)

Return to Compton