LHRS for GMn

From Hall A Wiki
Revision as of 11:56, 9 June 2021 by Flay (Talk | contribs) (Nominal Settings)

Jump to: navigation, search

Back to How-To

Nominal Settings

  • When starting a shift, it is prudent to verify that the magnets are set correctly. If it's not right, consult the RC. Currents should be within about 0.5 A of the values. Also, note that "readback" values are slightly different from "set point" values.
  • The LHRS dipole NMR doesn't lock. Need to set manually to match the field value (iterative procedure, see the instruction below)
  • Below are set points. Readbacks will be a bit lower.

LHRS Dipole


Checking and Controlling Drifts