Difference between revisions of "May 6, 2018"

From Hall A Wiki
Jump to: navigation, search
(Created page with "Back to Main Page >> Moller Page >> Moller Weekly Meeting Index previous meeting << >> May_13%2C_2...")
 
Line 13: Line 13:
 
Agenda:
 
Agenda:
 
*Onsite update -- Simona/Roman/Sanghwa
 
*Onsite update -- Simona/Roman/Sanghwa
*Simulation update -- Eric
+
*Simulation update -- Eric [https://hallaweb.jlab.org/dvcslog/moller/102 here]
*Simulation update -- Bill
+
 
  
 
----
 
----
Line 34: Line 34:
 
Minutes
 
Minutes
 
----
 
----
 +
Simona could not make it but sent an email update which is reproduced here.
 +
 +
Hi Guys,
 +
I won't be able to participate in the meeting today (Hall work) but here is a Moller update:
 +
 +
--> the target motion system is ready (Ethan got the pieces from the machine shop last week and did the installation); he still needs to test the motion to make sure everything is working O.K.
 +
 +
--> Dave Meekins got even busier with other things and did not attempt to install the  Copper foil yet but there is time; he is aware of the deadline and he will make it (I asked the survey group to do the target survey anytime after May 20th)
 +
 +
 +
--> Yves got back to me about running 1 muA on the 4 micron target without too many ion chambers trips: he said it's not a problem; with new ion chambers calibrations and also a procedure of "how to do things efficiently" which they wrote down since commissionning it will work.
 +
 +
 +
--> Today the scintillator PMTs have been delivered to my office. I will do a dark box test next week and I will install them in the detector shortly after.
 +
 +
 +
--> next week I will also work on getting the 4 BPM signals into the scaler module.
 +
 +
 +
  In two weeks from now I will give another DAQ update (including the TDC readout).
 +
 +
 +
That's all I have for this week.
 +
 +
 +
Have a good week,
 +
 +
 +
Simona

Revision as of 13:42, 6 May 2019

Back to Main Page >> Moller Page >> Moller Weekly Meeting Index

previous meeting << >> following meeting


Moller DocDB

Original Moller Polarimeter Page

Moller ELog


Agenda:

  • Onsite update -- Simona/Roman/Sanghwa
  • Simulation update -- Eric here



Connection details:

Meeting URL https://bluejeans.com/388466836

Meeting ID 388 466 836

US toll free phone 1.888.240.2560

Dial in, type in the meeting ID and then press ##


Minutes


Simona could not make it but sent an email update which is reproduced here.

Hi Guys, I won't be able to participate in the meeting today (Hall work) but here is a Moller update:

--> the target motion system is ready (Ethan got the pieces from the machine shop last week and did the installation); he still needs to test the motion to make sure everything is working O.K.

--> Dave Meekins got even busier with other things and did not attempt to install the Copper foil yet but there is time; he is aware of the deadline and he will make it (I asked the survey group to do the target survey anytime after May 20th)


--> Yves got back to me about running 1 muA on the 4 micron target without too many ion chambers trips: he said it's not a problem; with new ion chambers calibrations and also a procedure of "how to do things efficiently" which they wrote down since commissionning it will work.


--> Today the scintillator PMTs have been delivered to my office. I will do a dark box test next week and I will install them in the detector shortly after.


--> next week I will also work on getting the 4 BPM signals into the scaler module.


 In two weeks from now I will give another DAQ update (including the TDC readout).


That's all I have for this week.


Have a good week,


Simona