May 6, 2018

From Hall A Wiki
Revision as of 13:42, 6 May 2019 by Jonesdc (Talk | contribs)

Jump to: navigation, search

Back to Main Page >> Moller Page >> Moller Weekly Meeting Index

previous meeting << >> following meeting

Moller DocDB

Original Moller Polarimeter Page

Moller ELog


  • Onsite update -- Simona/Roman/Sanghwa
  • Simulation update -- Eric here

Connection details:

Meeting URL

Meeting ID 388 466 836

US toll free phone 1.888.240.2560

Dial in, type in the meeting ID and then press ##


Simona could not make it but sent an email update which is reproduced here.

Hi Guys, I won't be able to participate in the meeting today (Hall work) but here is a Moller update:

--> the target motion system is ready (Ethan got the pieces from the machine shop last week and did the installation); he still needs to test the motion to make sure everything is working O.K.

--> Dave Meekins got even busier with other things and did not attempt to install the Copper foil yet but there is time; he is aware of the deadline and he will make it (I asked the survey group to do the target survey anytime after May 20th)

--> Yves got back to me about running 1 muA on the 4 micron target without too many ion chambers trips: he said it's not a problem; with new ion chambers calibrations and also a procedure of "how to do things efficiently" which they wrote down since commissionning it will work.

--> Today the scintillator PMTs have been delivered to my office. I will do a dark box test next week and I will install them in the detector shortly after.

--> next week I will also work on getting the 4 BPM signals into the scaler module.

 In two weeks from now I will give another DAQ update (including the TDC readout).

That's all I have for this week.

Have a good week,