Difference between revisions of "Moller Polarimeter How Tos"

From Hall A Wiki
Jump to: navigation, search
(CAEN High Voltage Controls)
Line 1: Line 1:
==CAEN High Voltage Controls==
+
===Hall A Moller High Voltage Controls===
  
 
Usual use of the HV controls will come from the GUI accessible via jmenu. Open jmenu as adaq on one of the adaq accounts:
 
Usual use of the HV controls will come from the GUI accessible via jmenu. Open jmenu as adaq on one of the adaq accounts:
Line 6: Line 6:
  
  
 +
===CAEN High Voltage Controls===
 +
Occasionally it might be necessary to log in directly to the CAEN HV server for example to reboot the system or if the GUI stops responding.
  
To reboot the HV from adaq account log in to hlal00 as hacuser by running
+
#To log in to the HV server from adaq account log in to hlal00 as hacuser by running
 
  ssh -Y hacuser@hlal00
 
  ssh -Y hacuser@hlal00
  
At the prompt open firefox (Note: that the command below allows one to bypass the usual errors about firefox already running)
+
#At the prompt open firefox (Note: that the command below allows one to bypass the usual errors about firefox already running)
 
  firefox -p default --no-remote
 
  firefox -p default --no-remote
  
In the browser type the following address which will open the CAEN server control platform:
+
#In the browser type the following address which will open the CAEN server control platform:
 
  http://ihvhapol.acc.jlab.org
 
  http://ihvhapol.acc.jlab.org
  

Revision as of 15:39, 17 August 2022

Hall A Moller High Voltage Controls

Usual use of the HV controls will come from the GUI accessible via jmenu. Open jmenu as adaq on one of the adaq accounts:

ssh -Y adaq@adaq1 jmenu

Navigate to the controls JMenu >> System Expert >> Hall A >> Moller >> CAEN HV >> HV Card 2. Card 2 has the Moller calorimeter PMTs.


CAEN High Voltage Controls

Occasionally it might be necessary to log in directly to the CAEN HV server for example to reboot the system or if the GUI stops responding.

  1. To log in to the HV server from adaq account log in to hlal00 as hacuser by running
ssh -Y hacuser@hlal00
  1. At the prompt open firefox (Note: that the command below allows one to bypass the usual errors about firefox already running)
firefox -p default --no-remote
  1. In the browser type the following address which will open the CAEN server control platform:
http://ihvhapol.acc.jlab.org

To reboot go to Setting Menu >> Reboot

To set channels manually outside the GUI go to Main Menu>>Channels Controller>Click to Start. This should open a basic table controller in Iced Tea software.