Old MolPol DAQ Analysis
From Hall A Wiki
Revision as of 15:57, 13 August 2018 by Cameronc
Making Polarization measurements
- Start dbedit on adaq1, select "mollerpol_l" database and set in "beam_pol" configuration table in row "code"
parameter "adcevents" from 9 to 2: " ... adcevents=2"
- It is possible to read these files from the ~moller home directory using any account defined in the adaqfs computer system
- Make at least two CODA runs in order to use both coil polarities.
- Data analysis:
- old DAQ: adaq1:~/paw/moller/
> paw paw> exec run run=15625 paw> exec lg_spectra run=15625 paw> exec time run=15625 paw> lcd mag_optim paw> exec anpow_set e0=7.37 (E0 - beam energy in GeV) paw> exec asym11 anpow=0.7735 gate=0.033 run=15625 (gate=0.033 for 30Hz helicity frequency and gate=0.0008 for 1kHz)