Difference between revisions of "PortSever and CPU Programming"

From Hall A Wiki
Jump to: navigation, search
(New page: 1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab ) 2. connect to the PortServer, specifying the exact port e.g. telnet bbts-tlab 2002 3. [...)
 
Line 5: Line 5:
 
   telnet bbts-tlab 2002
 
   telnet bbts-tlab 2002
  
3.  
+
3. Inside the PortServer, look for the CPU by pressing 'return'; You should see something like
 +
 
 +
  [VxWorks]
 +
 
 +
4. The telnet functionality is very simple:
 +
 
 +
4.1. Type 'p' to print boot parametes
 +
 
 +
4.2. Type 'c' to change boot parametes
 +
 
 +
4.3. Type '@' to boot (load & go)
 +
 
 +
4.4. Type '?' for printing the list of available commands
 +
  
 
[[http://hallaweb.jlab.org/wiki back to Hall A wiki]]
 
[[http://hallaweb.jlab.org/wiki back to Hall A wiki]]

Revision as of 13:41, 13 February 2015

1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab )

2. connect to the PortServer, specifying the exact port e.g.

 telnet bbts-tlab 2002

3. Inside the PortServer, look for the CPU by pressing 'return'; You should see something like

 [VxWorks]

4. The telnet functionality is very simple:

4.1. Type 'p' to print boot parametes
4.2. Type 'c' to change boot parametes
4.3. Type '@' to boot (load & go)
4.4. Type '?' for printing the list of available commands

[back to Hall A wiki]