Difference between revisions of "PortSever and CPU Programming"

From Hall A Wiki
Jump to: navigation, search
Line 1: Line 1:
 
1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab )
 
1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab )
  
2. connect to the PortServer, specifying the exact port e.g.
+
2. connect to the PortServer, specifying the exact port, e.g.
  
 
   telnet bbts-tlab 2002
 
   telnet bbts-tlab 2002
  
3. Inside the PortServer, look for the CPU by pressing 'return'; You should see something like
+
3. Inside the PortServer, look for the CPU by pressing 'return'; You should see, e.g.
  
 
   [VxWorks]
 
   [VxWorks]
Line 14: Line 14:
  
 
* Type 'c' to change boot parametes
 
* Type 'c' to change boot parametes
 +
 +
* Type '?' for printing the list of available commands
  
 
* Type '@' to boot (load & go)
 
* Type '@' to boot (load & go)
  
* Type '?' for printing the list of available commands
+
 
 +
 
 +
boot device          : dc
 +
unit number          : 0
 +
processor number    : 0
 +
host name            : srcdaq
 +
file name            : /pub/kern/5.5/vx2400_v2
 +
inet on ethernet (e) : 129.57.36.180
 +
host inet (h)        : 129.57.37.93
 +
gateway inet (g)    : 129.57.36.1
 +
user (u)            : anonymous
 +
ftp password (pw)    : anonymous
 +
flags (f)            : 0x20
 +
target name (tn)    : bbsfi1-tlab
 +
startup script (s)  : /home/a-onkl/bbite/vxworks/bbts1.boot
 +
 
 +
 
  
 
[[http://hallaweb.jlab.org/wiki back to Hall A wiki]]
 
[[http://hallaweb.jlab.org/wiki back to Hall A wiki]]

Revision as of 13:43, 13 February 2015

1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab )

2. connect to the PortServer, specifying the exact port, e.g.

 telnet bbts-tlab 2002

3. Inside the PortServer, look for the CPU by pressing 'return'; You should see, e.g.

 [VxWorks]

4. The telnet functionality is very simple:

  • Type 'p' to print boot parameters
  • Type 'c' to change boot parametes
  • Type '?' for printing the list of available commands
  • Type '@' to boot (load & go)


boot device          : dc
unit number          : 0 
processor number     : 0 
host name            : srcdaq
file name            : /pub/kern/5.5/vx2400_v2
inet on ethernet (e) : 129.57.36.180
host inet (h)        : 129.57.37.93
gateway inet (g)     : 129.57.36.1
user (u)             : anonymous
ftp password (pw)    : anonymous
flags (f)            : 0x20 
target name (tn)     : bbsfi1-tlab
startup script (s)   : /home/a-onkl/bbite/vxworks/bbts1.boot


[back to Hall A wiki]