PortSever and CPU Programming

1. find the PortServer name, ( Left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab )

2. connect to the PortServer, specifying the exact port, e.g.

 telnet bbts-tlab 2002

3. Inside the PortServer, look for the CPU by pressing 'return'; You should see, e.g.

 [VxWorks]

4. The telnet functionality is very simple:

• Type 'p' to print boot parameters

• Type 'c' to change boot parametes

• Type '?' for printing the list of available commands

• Type '@' to boot (load & go)

Bigbite PortServer

Left HRS PortServer

Right HRS PortServer

[back to Hall A wiki]