PortSever and CPU Programming

From Hall A Wiki
Revision as of 13:42, 13 February 2015 by Cohen (Talk | contribs)

Jump to: navigation, search

1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab )

2. connect to the PortServer, specifying the exact port e.g.

 telnet bbts-tlab 2002

3. Inside the PortServer, look for the CPU by pressing 'return'; You should see something like


4. The telnet functionality is very simple:

  • Type 'p' to print boot parameters
  • Type 'c' to change boot parametes
  • Type '@' to boot (load & go)
  • Type '?' for printing the list of available commands

[back to Hall A wiki]