Running GSIM CLAS simulation

From Hall A Wiki
Revision as of 18:53, 2 March 2015 by Cohen (Talk | contribs) (Running generated events through a CLASS GEANT-3 simulation)

Jump to: navigation, search

GSIM Inventory

  • GSIM directory is to be located on the farm, at a large enough work disk. An example of the simulation inventory can be found at
 /work/halla/e07006/disk1/Erez/GSIM  (will be used for the remainder of the documentation as $GSIM)

Running GSIM

Setting an Event Generator and create events file

  • PYTHIA is used as the base-line event generator (EG) for GSIM
  • The existing EG is a fortran script located under $GSIM/Documents/ directory.

Setting Event Generator

  • The EG should be modified for the specific solid target. An example for 12C can be found at
  • To build the event generator use the build compilation command, e.g.
 cd  $GSIM/Documents/

(the result: an executable event generator e.g. EventGenerator_exe/EG_C.exe)

Generate the Events

  • Generate the events by executing the EG, e.g.
 ./EG_C.exe > test.dat

(the result: a data file EventGenerator_exe/test.dat)

Look at the generated distributions

  • A utility for observing the generated data exist in the main EG directory $GSIM/Documents/EventGenerator/LeptoRoot
  • Port the data file into the utility directory
 cp $GSIM/Documents/EventGenerator_exe/test.dat $GSIM/Documents/LeptoRoot/
  • A perl script is used to write it in the right format
 ./ < test.dat > data.dat 

(the result: a different (just numbers) data file LeptoRoot/data.dat)

  • An executable is then used to write the data into a ROOT TTree

(the result: a ROOT file LeptoRoot/data.root that will enable you to observe the generated distributions)

Converting generated data files to GEANT-3 format input

  • port the generated-events data file (in this example test.dat) to the converters utility and convert it to txt format.

For example, a file from the 2H target would be converted by

 cp $GSIM/Documents/EventGenerator_exe/test.dat $GSIM/converters
 ./convert_deut < test.dat > convert_output.dat

(the result: a txt file /converters/convert_output.dat )

  • port and convert the txt file to a G3 part format corresponding to the MCTK bank (works better than particle bank in G3)
 mv convert_output.dat  ../Lepto64
 cd ../Lepto64
 ./txt2part -m -omctk.evt < convert_output.dat 

(the result: a part file /Lepto64/mctk.evt suitable for GSIM)

Running generated events through a CLASS GEANT-3 simulation

  • port the events file to the shared directory
 mv mctk.evt share
 cd share
  • to run the first XXXX events through the simulation, modify the ffread file so that it triggers XXXX events
  • then source the shell script that runs GSIM

(the result: 2 bos + 1 txt files , gsimtest.txt, gsimtest.bos, gpp_test.bos and the output file outfile1 )

running GSIM with the generated events

Preprocessing to add smearing of the data

Look at the output files

Converting the GSIM output file to root

Observing the output ROOT TTree

[back to Tel Aviv University SRC Group]