Difference between revisions of "Setup g2p environment"

From Hall A Wiki
Jump to: navigation, search
Line 1: Line 1:
This is the wiki guide you to setup root,analyzer,geant4 environment on ifarm, also you can use it on your level 1/level 2 64bit computer if you have already mount the g2p work disk on it. For bash shell, you need to build the environment by yourself, the software can be found in /w/halla-1/g2p/software.
+
This is the wiki guide to setup geant4 environment on ifarm, also you can use it on your level 1/level 2 64bit computer if you have already mounted the g2p work disk on it. For bash shell, you need to build the environment by yourself, the software can be found in /w/halla-1/g2p/software.
  
 
1.Setup root.  
 
1.Setup root.  
Line 6: Line 6:
 
to use root enviroment temporarily, or you can add a line below to your ~/.cshrc file:
 
to use root enviroment temporarily, or you can add a line below to your ~/.cshrc file:
 
   source /w/halla-1/g2p/software/setupg2penv.csh
 
   source /w/halla-1/g2p/software/setupg2penv.csh
and the type the command of:
+
and then type the command:
 
   source ~/.cshrc
 
   source ~/.cshrc
 
the geant4 and cernlib are also included in there.
 
the geant4 and cernlib are also included in there.
2.Setup analyzer.
 
Same step as above, You can add a line below to your ~/.cshrc file:
 
  source /w/halla-1/g2p/software/analyzer.csh
 
3.Setup analyzer database.
 
You need to define the database by yourself, just add a line below to your ~/.cshrc file:
 
  setenv DB_DIR  your_database
 
change your_database to the path of the database you want. If you don't define it ,the default database will be at /w/halla-1/g2p/software/analyzer_DB/DB
 

Revision as of 10:53, 13 September 2011

This is the wiki guide to setup geant4 environment on ifarm, also you can use it on your level 1/level 2 64bit computer if you have already mounted the g2p work disk on it. For bash shell, you need to build the environment by yourself, the software can be found in /w/halla-1/g2p/software.

1.Setup root. You can simply type the command of:

 source /w/halla-1/g2p/software/setupg2penv.csh

to use root enviroment temporarily, or you can add a line below to your ~/.cshrc file:

 source /w/halla-1/g2p/software/setupg2penv.csh

and then type the command:

 source ~/.cshrc

the geant4 and cernlib are also included in there.