Some common issues with the DAQ

From Hall A Wiki
Revision as of 10:22, 23 November 2016 by Jroche (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

If ROC27,28,29 and 31 do not start type : rebootDVCS

that will power cycle the crates, leave 2 minutes for the crates to boot and the do type again : dvcsrocs

To power cycle ROC30, telnet into hareboot30 ( look at white board )

and once logged in, power cycle port 1


Usually fastest way to recover CODA.

Reboot HRS ROCs

Go in ROC3,4,5, TS11 windows and type reboot or Ctrl-X to reboot them do : startcoda

and try to restart a run


You could also try to look into [this issue].