Difference between revisions of "Turning off the laser"

From Hall A Wiki
Jump to: navigation, search
(New page: ==Turning off the laser system== # Stop the laser "flipping script" if running on the compton-old vnc server. # If ON, turn the laser locking "servo" to OFF. # Turn the seed laser ramp OF...)
 
 
Line 1: Line 1:
 
==Turning off the laser system==
 
==Turning off the laser system==
  
# Stop the laser "flipping script" if running on the compton-old vnc server.
+
# Stop the laser "flipping script" if running on the compton vnc server.
 
# If ON, turn the laser locking "servo" to OFF.
 
# If ON, turn the laser locking "servo" to OFF.
 
# Turn the seed laser ramp OFF.
 
# Turn the seed laser ramp OFF.
 +
# Turn off the fiber amplifier. This must be done before turning off the seed laser.
 
# Turn off the seed laser.
 
# Turn off the seed laser.
# Turn off the fiber amplifier --> you will need to do this via the remote power strip under the Compton laser table (cptps3).
 

Latest revision as of 15:07, 21 June 2019

Turning off the laser system

  1. Stop the laser "flipping script" if running on the compton vnc server.
  2. If ON, turn the laser locking "servo" to OFF.
  3. Turn the seed laser ramp OFF.
  4. Turn off the fiber amplifier. This must be done before turning off the seed laser.
  5. Turn off the seed laser.