Turning off the laser

From Hall A Wiki
Revision as of 17:00, 29 March 2016 by Gaskelld (Talk | contribs) (New page: ==Turning off the laser system== # Stop the laser "flipping script" if running on the compton-old vnc server. # If ON, turn the laser locking "servo" to OFF. # Turn the seed laser ramp OF...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Turning off the laser system

  1. Stop the laser "flipping script" if running on the compton-old vnc server.
  2. If ON, turn the laser locking "servo" to OFF.
  3. Turn the seed laser ramp OFF.
  4. Turn off the seed laser.
  5. Turn off the fiber amplifier --> you will need to do this via the remote power strip under the Compton laser table (cptps3).