Wednesday, January 22, 2020, 1:00 pm EST

From Hall A Wiki
Revision as of 15:05, 22 January 2020 by Dalton (Talk | contribs) (Minutes)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Back to Main Compton Page >> Compton Meetings

1. Dial Toll-Free Number: 1-888-240-2560 (U.S. & Canada)
2. International participants dial:
Toll Number: 1-408-740-7256
3. Enter meeting ID:140287970

Desktop sharing: 


Meeting room = Counting House Meeting Room

=== General ===Beam through Compton last week!

Electron detector

  • Detector status
  • QWAD adapter boards
  • Counting DAQ


  • Cavity/laser status

Photon Detector

  • Detector, DAQ status


  • Online analysis results


Mark D, Dave G, Don, Adam, Alex, Brian, Jinlong, JCC, Cip, Michael G

  1. General/CREX analysis
    1. Beam through the chicane. Looked good.
    2. There were laser-on drifts due to beam motion in the chicane.
    3. Ops want us to use the Moller lock during production. This would require changing the lock. We're happy with any solution that locks to the Compton table BPMs.
    4. Some snail have very good data: good separation, small error, good chi2. Some have double peaking in the pedestal.
    5. Use snapshot pedestal to correct accumulators? Code doesn't exist, would need to be developed.
    6. TODO Make plot of pedestal as function of time from snapshots.
    7. Discussion about reading out tube voltage and current or DAQ temperature.
  2. Electron detector
    1. Adaptor boards have not been tested yet so the reaming boards haven't been populated with resistors. It will take about 1-2 weeks to stuff the boards and another 2 weeks to ship them once the correct resistor has been verified.