December 18th 2020

• Updates
• HCAL
  • taking LED data
• BB shower
  • no trigger on shower
  • Bryan looked at triggers - not many triggers going in - need to check trigger
• Hodoscope
  • Bryan still need to gate data, gates coming in - check gate polarity
  • 64 out of 90 bars
  • HV one channel was tripping all board of 48 - Arun will try to fix it - have found all parts -
• GEM
  • UVA clean room : still need to take data with adding additionnal cable
  • UVA LV for next week in TEDF
  • INFN : SSP readout - some APV disconnected - no triggers going in - MPD 17 disabled - MPD 18 and 3 2 and 6 - no more error message using MPDVme configuration - no trigger - will need to check - one last pedestal run MPD 17 all card have different noise panel - more fluctuations - 17 and 18 using same LV - maybe voltage drop when configuration - configure fine but not getting back data - check read back config
    • GEM TEDF : took some CODA3 runs - cannot run several PEB - Bryan has instructions to set up port to fix that - DAQ can lend a server - will set up PEB on atedf3 for now

APV check program - Bryan could see the APV.

• GRINCH : still powered - Bradley tried to run CODA3 - Bryan still working on updating to the latest driver - new library has config files - GTP not included - working on upgrading
• HRS
  • CODA3 on HRS DAQ : 1 Fastbus crate working with new readout list with help of Bryan and Dave - student will join to help - 3 TIs on hand - will start setting up the other Fastbus
• CDet
  • finished collecting cosmics - to be analyzer
  • everything shut down for winter break - will work on next module next year
  • analyzer set up on clrlpc, trying to compile the read out list - need to find library for scalers
  • new Linux for CPUs : new setup using new linux to boot - will upgrade HCal later
  • leave crates on so Bryan can test up systems
  • will run on clrlpc
• RP and active scintillator
  • what version used ? - library fadc-HallB
  • PXE boot from atedf3