G2p 1711 25T
From Hall A Wiki
| HRS Momentum (MeV) | Material # | Spread (%) | Runs | Events (M) | Comments | |
| 1031 | 7 | 1.00 | 14 | 88.4 | ||
| 1031 | 8 | 0.17 | 2 | 2.4 | ||
| 1097 | 7 | 0.81 | 13 | 89.6 | ||
| 1167 | 8 | 1.73 | 18 | 111.2 | ||
| 1241 | 8 | 0.89 | 19 | 126.4 | ||
| 1320 | 8 | 7.86 | 19 | 116.0 | different raster size caused, also lower dead time for 4569/4571. After applying same beam pos cut, the spread jump between runs [4341-4357] and runs[4565-4566] are gone. Still have scattering angle dependent. [1] | |
| 1405 | 8 | 4.97 | 20 | 136.0 | scat angle dependent, caused by different beam angle. Also the latter runs have different raster size. Also did the same beam pos cut which leads more scat angle dependency | |
| 1494 | 8 | 14.57 | 6 | 19.0 | different beam position and angle,different raster size [2] | |
| 1589 | 7 | 5.12 | 21 | 144.2 | scat angle dependent, caused by different beam angle | |
| 1590 | 8 | 0.85 | 3 | 3.1 | ||
| 1691 | 7 | 1.44 | 3 | 5.5 | ||
| 1691 | 8 | 0.00 | 1 | 7.0 | ||
| 572 | 8 | 0.15 | 5 | 29.4 | ||
| 622 | 8 | 0.68 | 6 | 35.4 | ||
| 676 | 8 | 0.48 | 6 | 38.2 | ||
| 735 | 8 | 0.49 | 9 | 51.8 | ||
| 798 | 8 | 0.52 | 13 | 80.7 | ||
| 856 | 8 | 0.48 | 10 | 65.1 | ||
| 911 | 8 | 0.16 | 10 | 70.1 | ||
| 969 | 7 | 0.58 | 15 | 100.6 |
More detailed 1.711GeV 2.5T Longitudinal left arm plots are available here back
