Jessica FB
Setting up fastbus crates: once everything is plugged in
terminal: minicom terminal: crtl a then o seperately
This will bring up options for changing system
terminal: go to serial port and change A - Serial Device to: /ttyUSB0
E - pps/par/bits to : 9600 8N1
To configure the system:
terminal: c
type in the following information
Booting the CPU
boot device : dc unit number : 0 processor number : 0 host name : yer122 file name : /home/vx/kern/5.5/vx2400_u1 inet on ethernet (e) : 129.57.37.3:fffffe00 host inet (h) : 129.57.36.45 gateway inet (g) : 129.57.36.1 user (u) : vx ftp password (pw) : vxworks111 flags (f) : 0x20 target name (tn) : eeltest2 startup script (s) : eeltest2-yer122.boot
After all of this is filled in:
terminal: p (pritns what was typed in) terminal: @ (this will boot the system)
To log into the CPU through the network to CPU in eel: telnet eeltest2 other computer: ssh username@login.jlab.org
ssh username@hallgw
code
ssh adaq@yer122
telnet eeltest2
Where to find all files for...:
Files on yer122 : /home/vx/jessica/
TI files in /home/vx/jessica/ti directory
Writing, compiling, and executing C code:
to compile c code: terminal:ccppc -c _____.c
to execute code: terminal:ld < _____.o
Robs Method for running through analyzer:
terminal: analyzer
terminal: .L name.c
terminal: name()
terminal: .q (to quit analyzer)
Notes on vxWorks:
to change directroy: cd "argument" ... use quotes insteaD
Upgrading firmware. It seems 2431 does not have enough memory to do the upgrade.
Will try with a MVME5100
boot device : fei unit number : 0 processor number : 0 host name : yer122 file name : /home/vx/kern/5.5/vx5100_v2 inet on ethernet (e) : 129.57.37.3:fffffe00 host inet (h) : 129.57.36.45 gateway inet (g) : 129.57.36.1 user (u) : vx ftp password (pw) : vxworks111 flags (f) : 0x20 target name (tn) : eeltest2 startup script (s) : eeltest2-yer122.boot
crl/coda doc for programming
http://www.jlab.org/coda/new/Users_Guide/2_1_guide/Components/ROC/CRL/crl.html
