View source for December 18th 2020

*Updates
*HCAL
** taking LED data
*BB shower
** no trigger on shower
** Bryan looked at triggers - not many triggers going in - need to check trigger
*Hodoscope
** Bryan still need to gate data, gates coming in - check gate polarity 
** 64 out of 90 bars 
** HV one channel was tripping all board of 48 - Arun will try to fix it - have found all parts - 
*GEM
**UVA clean room : still need to take data with adding additionnal cable
**UVA LV for next week in TEDF
**INFN : SSP readout - some APV disconnected - no triggers going in - MPD 17 disabled - MPD 18 and 3 2 and 6 - no more error message using MPDVme configuration - no trigger - will need to check - one last pedestal run MPD 17 all card have different noise panel - more fluctuations -  17 and 18 using same LV - maybe voltage drop when configuration - configure fine but not getting back data - check read back config
***GEM TEDF : took some CODA3 runs - cannot run several PEB - Bryan has instructions to set up port to fix that - DAQ can lend a server - will set up PEB on atedf3 for now 
APV check program - Bryan could see the APV.
*GRINCH : still powered - Bradley tried to run CODA3 - Bryan still working on updating to the latest driver - new library has config files - GTP not included - working on upgrading 
*HRS
** CODA3 on HRS DAQ : 1 Fastbus crate working with new readout list with help of Bryan and Dave - student will join to help - 3 TIs on hand - will start setting up the other Fastbus 
*CDet
**finished collecting cosmics - to be analyzer
**everything shut down for winter break - will work on next module next year
** analyzer set up on clrlpc, trying to compile the read out list - need to find library for scalers 
**new Linux for CPUs : new setup using new linux to boot - will upgrade HCal later 
**leave crates on so Bryan can test up systems
**will run on clrlpc
*RP and active scintillator 
**what version used ? - library fadc-HallB
**PXE boot from atedf3