Difference between revisions of "August 21st 2023"
From Hall A Wiki
(Created page with "*Updates *Outstand issues") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
*Updates | *Updates | ||
| + | **BB calorimeter | ||
| + | *** working getting BB calorimeter up and running for next run | ||
| + | *** HV modules were not connecting, check and fix everything, one cosmics during the week-end | ||
| + | *** all channels look fine | ||
| + | *** S6 modules not connecting to RPI crate, switched one from ECAL | ||
| + | **HCAL | ||
| + | ***looking if thresholds affect | ||
| + | *** no loss with cosmics | ||
| + | *** can see loss of TDC signal with pulser with large amplitude and high rate | ||
| + | *** offset and noise from aplifier : 5 to 6 mV negative and 10 mV, ground loop 2 to 4 mV | ||
| + | *** change amplifier and check old data and cosmics to see if we can increase threshold | ||
| + | **Hodoscope | ||
| + | ***HV was turned | ||
| + | **GEM | ||
| + | ***BB low level test done, DAQ se | ||
| + | ***SBS | ||
| + | ***VTP bug fixed pushed | ||
| + | **DAQ | ||
| + | ***pushed fix for sync error displayed in event builder | ||
| + | **CDET | ||
| + | ***level translator in Hall A | ||
| + | ***wants patch panel | ||
| + | ***commissionning last modules | ||
| + | **Parity DAQ | ||
| + | ***all signals | ||
| + | *Outstanding issues | ||
| − | * | + | **LHRS Crate |
| + | **F1 missing TDC | ||
| + | |||
| + | *WAPP trigger | ||
| + | **just use standard trigger | ||
| + | **BB proton/pion response | ||
| + | **Provokar checked with Mark and current BB front end : preshower trigger might be doable with too much work | ||
Latest revision as of 11:37, 21 August 2023
- Updates
- BB calorimeter
- working getting BB calorimeter up and running for next run
- HV modules were not connecting, check and fix everything, one cosmics during the week-end
- all channels look fine
- S6 modules not connecting to RPI crate, switched one from ECAL
- HCAL
- looking if thresholds affect
- no loss with cosmics
- can see loss of TDC signal with pulser with large amplitude and high rate
- offset and noise from aplifier : 5 to 6 mV negative and 10 mV, ground loop 2 to 4 mV
- change amplifier and check old data and cosmics to see if we can increase threshold
- Hodoscope
- HV was turned
- GEM
- BB low level test done, DAQ se
- SBS
- VTP bug fixed pushed
- DAQ
- pushed fix for sync error displayed in event builder
- CDET
- level translator in Hall A
- wants patch panel
- commissionning last modules
- Parity DAQ
- all signals
- BB calorimeter
- Outstanding issues
- LHRS Crate
- F1 missing TDC
- WAPP trigger
- just use standard trigger
- BB proton/pion response
- Provokar checked with Mark and current BB front end : preshower trigger might be doable with too much work
