Difference between revisions of "Trigger Wiring Diagram"
From Hall A Wiki
| Line 2: | Line 2: | ||
[[Image:Wire_diagram.jpg]] | [[Image:Wire_diagram.jpg]] | ||
[[Image:Wire_diagram_2.jpg]] | [[Image:Wire_diagram_2.jpg]] | ||
| + | |||
| + | == Notes on wiring == | ||
| + | === CRL Code === | ||
| + | *The CRL code downloaded to the VME crate contains important information. For example: | ||
| + | **Determining which channels are used | ||
| + | ***The trigger channel on the TI | ||
| + | ***The data input channel used on the c-ram 550 | ||
| + | **The number of channels sent from the gassiplex must be matched in the CRL code as well to create the proper clock signal | ||
Revision as of 16:04, 6 June 2010
This is a wiring diagram for the DAQ for the GEM detector. It includes reference timing information on the triggers.
Notes on wiring
CRL Code
- The CRL code downloaded to the VME crate contains important information. For example:
- Determining which channels are used
- The trigger channel on the TI
- The data input channel used on the c-ram 550
- The number of channels sent from the gassiplex must be matched in the CRL code as well to create the proper clock signal
- Determining which channels are used
