Difference between revisions of "Sampling Calorimeter"
From Hall A Wiki
(→Run sheet) |
(→Run sheet) |
||
| Line 301: | Line 301: | ||
| 78 || Fri 3-15 11:07 || Fri 3-15 13:48 || 13555|| need table || 1600, 1600, 1600, 1600 || HV O-05 placed in bottom left, O-02 placed in center. HV O-02 set to -1700V <span style="color:red">High number of events, but the spectra looks normal. Perhaps a problem from CODA? I checked the front-end electronics (logic and DAQ) and they look normal.(Carlos)</span> || | | 78 || Fri 3-15 11:07 || Fri 3-15 13:48 || 13555|| need table || 1600, 1600, 1600, 1600 || HV O-05 placed in bottom left, O-02 placed in center. HV O-02 set to -1700V <span style="color:red">High number of events, but the spectra looks normal. Perhaps a problem from CODA? I checked the front-end electronics (logic and DAQ) and they look normal.(Carlos)</span> || | ||
|- | |- | ||
| − | | 79 || Fri 3-15 14:09 || | + | | 79 || Fri 3-15 14:09 || Fri 3-15 17:12 || 9855 || need table || 1600, 1600, 1600, 1600 || HV O-02 set to -1750V <span style="color:red">apparently, the high rate happen in suddenly bursts, it is not continiusly. I cross checked with the output of the other logic module, but now nothings happen. Bogdan had suggested that it could be caused by electronic noise in the Bay and can connect the gate generator to avoid it. Since it looks that all had came to normality, I leave the set up as before.(Carlos)</span>. Final Note: Althought the high number of events, the problem looks solved. This high number is because I started the run before the checking. || |
| + | |- | ||
| + | | 80 || Fri 3-15 17:15 || || || need table || 1600, 1600, 1600, 1600 || HV O-02 set to -1800V || | ||
|} | |} | ||
Revision as of 16:17, 15 March 2013
Contents
Links
- pages from HERA-B Technical Design Report
- HERA-B Calorimeter NIM article by G. Avoni et al .Nucl.Instrum.Meth. A580 (2007) 1209-1226. DESY server version
- Conference contribution describing the calorimeter electronics.
- NIM article on the PHENIX EmCal. Phenix Thesis which has sections on the EMCal.
- NIM article on IHEP prototype EmCal for PANDA.
- Test facilities
- Directory of calorimeter papers collected by Zhiwen Zhao.
- SBS Meeting 06/02/2013 presentation of Carlos Ayerbe
Test setup
Nomenclature of the modules (could be changed)
In order to identify the different modules, the following structure is used:
X-YY-Z
with:
- X = O (outer) or M (middle)
- YY= 01, 02, 03, 04 ...
- Z (only Middle modules) = A, B, C, D
HV control
- General info on the HV GUIs is at HV Help page and Slow Control page
- Running HV control
- In one terminal:
- Login in as gep5.
- type: "su".
- cd to slowc/LecroyHV_Shimdir .
- type: ./LecroyHV_Shim_LocalPerl
- SHould connect to Lecroy crate and give the following message.
- After LecroyHV_Shim_LocalPerl is running. In another terminal :
- login as gep5 .
- cd to slowc .
- type : ./hvs BOB_TEST
- Gui window shuold pop up.
- Presently scintillator Top 1R, Bot 1 and Bot 2 in HV module 13 and chan 0,1,2
- Calo blocks 1-12 in module 15 for 0-11 and blocks 13-21 in module 14 chan 0-8.
- In one terminal:
- HV modules were tested by running -2000V across a 5 Megaohm resistor. we measured the voltage out and current out. The histogram below is the percent error in expected current values. The PDF is the charts holding the data taken during the test. Once the HV mosules are back in the TEDF another (more accurate) test may or may not be performed.
HV to Match Gain on Calorimeters
| Calorimeter | HV | Calorimeter | HV |
|---|---|---|---|
| 1 | 1500 V | 12 | 1600 V |
| 2 | 1635 V | 13 | ???? V |
| 3 | 1650 V | 14 | ???? V |
| 4 | 1600 V | 15 | 1600 V |
| 5 | ???? V | 16 | 1500 V |
| 6 | ???? V | 17 | ???? V |
| 7 | 1645 V | 18 | ???? V |
| 8 | 1565 V | 19 | 1510 V |
| 9 | ???? V | 20 | 1590 V |
| 10 | ???? V | 21 | ???? V |
| 11 | 1650 V |
Light Leaks sealing
The modules were sealed from light leaks with the use of black tape. To check the sealing, the output of the PMT was measured with an micro-amperimeter, before and after the cover with tape. In top of the pipe, where the PMT is allocated, a gum stopper with slits for the cables, are placed. After many checks it was found that:
- the main light leak come for the joint of the module with the PMT allocation pipe. (Covering it, reduce the current drain from PMT aproximatly in 1-2 orders of magnitude)
- covering the cap of the pipe, doesn't show significant improve.
- covering with tape the side corners of the module, the joint of the top and bottom plastic caps and the union of the pipe with the module reduce the current drain from PMT in 4-5 orders of magnitude.
Outer Modules
For the outer modules, the same PMT was used, with a voltage of 1000 V (max 1900 V) to avoid damage to the PMT.
| Module | Current before | Current after |
|---|---|---|
| O-01 | 15.2 μA | 0.3-0.2 nA |
| O-02 | 10.9 μA | 0.3-0.1 nA |
| O-03 | 48.5 μA | 0.7-0.5 nA |
| O-04 | N/A | 2-1.7 nA |
| O-05 | 34.4 μA | 2-1.4 nA |
Middle Modules
For the middle modules, the same PMT was used, with a voltage of 1000 V (max 1900 V) to avoid damage to the PMT.
| Module | Current before | Current after |
|---|---|---|
| M-01-A | 10.9 μA | ~0.5 nA |
| M-01-B | 24.2 μA | ~0.2 nA |
| M-01-C | 20.9 μA | ~0.2 nA |
| M-01-D | 7.5 μA | ~0.2 nA |
| M-02-A | 38.5 μA | ~0.7 nA |
| M-02-B | 13.1 μA | ~0.4 nA |
| M-02-C | 30.5 μA | ~0.3 nA |
| M-02-D | 10.7 μA | ~0.2 nA |
| M-03-A | 23.9 μA | ~0.7 nA |
| M-03-B | 6.45 μA | ~0.6 nA |
| M-03-C | 3.8 μA | ~0.3 nA |
| M-03-D | 19.2 μA | ~0.3 nA |
| M-04-A | 13.2 μA | ~0.7 nA |
| M-04-B | 6.69 μA | ~0.5 nA |
| M-04-C | 5.3 μA | ~0.5 nA |
| M-03-D | 7.8 μA | ~0.45 nA |
Trigger
This is the flow chart for the current trigger logic. We are using 3 scintillators; 1 double sided (2PMTs) on top, and 2 separate scintillators on bottom. The difference between threshold voltages is to match gains, this was not done by adjusting HV since presently using HV units with dual outputs for one HV setting.
Scheme of cables
Scheme of the HERA-B modules. The orientation is as follows: top view with the rack modules at its left. Each module is indicated by its nomenclature (explained above), the DAQ and HV cable number (in red) and the signal cable (sgn).
Cosmic Test
- Initial cosmic test could not have the entire calorimeter with HV since Jack has borrowed the Lecroy HV Crate. Got HV crate back on Feb 12 and started with run 45.
- CODA
- If computer is rebooted needed to login in as coda and open an terminal and type: msqld
- As coda start another terminalmove to bin/, and type : ./startcoda.
- This opens Xterm windows for the rcplatform, coda_eb_rc3, coda_er_rc3, rcgui, ssh (connection to the ROC and start ) and the main GUI Run Control.
- Run Control GUI should be in configuration=V792 and Session=TEDFSBS and EXPID=TEDFSBS.
- From the Platform menu select "Connect".
- click on the "Configure" button. Once EB,ER and ROC configured
- click on the "Download" button. Once EB,ER and ROC downloaded
- Click on the start run button.
- If problems first try clicking on the "Reset" button and startover with the "Configure", "Download" sequence.
- Replay data
- login as gep5
- type: source setanalyzer.sh
- cd Desktop/eel122
- to create root tree:
- analyzer
- at analyzer prompt type: decodeEel(Run number)
- Create root tree in file eeltestrun#.root
- then quit analyzer with: .q
- login as gep5
- Analyzer root tree
- type: root eeltestrun#.root
- Calo HV on O-01,O-02,O-03,O-04 in ADC channels 0,1,2,3 (CHANGE!!! O-02-> ADC channel 24 after run 51)
- Scint HV on Top left, Top right, Bot 1, Bot 2 in ADC channels 24,21,23,22 for run 33 . After run 33 adc channels 8,5,7,6
- Trigger shown above.
- Voltages till run 54
Run sheet
| Run Number | Start time | End time | Events | Calo HV | Scint HV | Comments | ADC Spectra |
|---|---|---|---|---|---|---|---|
| 33 | Fri 2-8 16:27:39 | Mon 2-11 11:07:40 | 10593 | 1500, 1500, 1500, 1500 | 1500, 1500, 1500, 1500 | No signal in ADC 22 ( Fix be replacing bad 36ns delay cable) Calo HV adc chan 0,1,2,3 (did not see 1 & 3, seems to be problem with the ADC cable move to cable with the scintillator signals and put this cable in the slot for 0-15) | |
| 34 | Mon 2-11 12:04:07 | crashed | 9102 | 1500, 1500, 1500, 1500 | 1500, 1500, 1500, 1500 | Run crashed. Found that the trigger cable has been moved ( Put it back for run 35). Calo O-01,O-02,O-03,O-04 in ADC channels 0,1,2,3 . Top 1L, Top 1R , Bot 1,Bot 2 channels 6,5,7,8. Thresholds for Top 1L, Top 1R , Bot 1,Bot 2 are 30,50,30,30 mV. Something is strange with data. Looking at Top 1L (adc[8]) see that most events are pedestal. Found that gate had been removed. | |
| 35 | Tues 2-12 10:25 | Tues 2-12 10:29 | ? | 1500, 1500, 1500, 1500 | 1500, 1500, 1500, 1500 | Test run to see if DAQ was working | |
| 36 | Tues 2-12 11:21 | Tues 2-12 11:31 | 17431 | 1500, 1500, 1500, 1500 | 1500, 1500, 1500, 1500 | Test run to check timing between ADC signal and ADC gate. Set trigger to be just Top scintillator. Put the L1A into a gate generator to get a gate width of 300ns. The gate arrived about 30ns before the ADC signal. | |
| 37 | Tues 2-12 | Tues 2-12 11:59 | ?? | 1500, 1500, 1500, 1500 | 1500, 1500, 1500, 1500 | Placed small bottom scint on the top. Made trigger the AND between "bot 1" and "Top 1L AND 1R". ADC cable was upsidedown | |
| 38 | Tues 2-12 12:00 | Tues 2-12 12:14 | 1709 | 1500, 1500, 1500, 1500 | 1500, 1500, 1500, 1500 | Placed small bottom scint on the top. Made trigger the AND between "bot 1" and "Top 1L AND 1R". ADC cable is corrected. Thresholds for Top 1L, Top 1R , Bot 1,Bot 2 are 30,50,30,30 mV. | |
| 39 | Tues 2-12 12:17 | Tues 2-12 12:20 | ?? | 1500, 1500, 1500, 1500 | 1500, 1500, 1500, 1500 | Placed small bottom scint on the top. Made trigger the AND between "bot 1" and "Top 1L AND 1R". Thresholds for Top 1L, Top 1R , Bot 1,Bot 2 are 50,50,50,50 mV. | |
| 40 | Tues 2-12 12:21 | Tues 2-12 12:30 | ?? | 1500, 1500, 1500, 1500 | 1600, 1600, 1600, 1600 | Placed small bottom scint on the top. Made trigger the AND between "bot 1" and "Top 1L AND 1R". Thresholds for Top 1L, Top 1R , Bot 1,Bot 2 are 50,50,50,50 mV. Top 1R peak is about 1000, top 1L has no peak. Bot 1 (adc 7) has slight overflow above 4096 | |
| 41 | Tues 2-12 12:33 | Tues 2-12 13:49 | 16969 | 1500, 1500, 1500, 1500 | 1600, 1600, 1600, 1600 | Placed small bottom scint back on the bottom. Made trigger the AND between "Bot 1" and "Bot 2". Thresholds for Top 1L, Top 1R , Bot 1,Bot 2 are 50,50,50,50 mV. | |
| 42 | Tues 2-12 13:57 | Tues 2-12 14:02 | 1189 | 1500, 1500, 1500, 1500 | 1600, 1600, 1600, 1600 | Placed small bottom scint back on the bottom. Made trigger the AND between "Bot 1" and "Bot 2". Thresholds for Top 1L, Top 1R , Bot 1,Bot 2 are 50,50,100,100 mV. | |
| 43 | Tues 2-12 14:05 | Tues 2-12 14:08 | 603 | 1500, 1500, 1500, 1500 | 1600, 1600, 1600, 1600 | Placed small bottom scint back on the bottom. Made trigger the AND between "Bot 1" and "Bot 2". Thresholds for Top 1L, Top 1R , Bot 1,Bot 2 are 50,50,100,150 mV. Crashed when ending run. | |
| 44 | Tues 2-12 14:23 | CRASHED | 00 | 1500, 1500, 1500, 1500 | 1600, 1600, 1600, 1600 | Run crashed immeadiately upon beginning | |
| 45 | Tues 2-12 17:09 | Tues 2-12 17:11 | 27718 | all 1600 | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. Test DAQ with trigger an OR of scintillators. | |
| 46 | Tues 2-12 18:40 | Wed 2-13 15:10 | 3474 | all 1600 | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of scintillators. | |
| 47 | Wed 2-13 15:16 | Thru 2-14 9:44 | 3043 | need table | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of scintillators. | |
| 48 | Thur 2-14 9:47 | Thur 2-14 12:00 | 1084 | need table | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of Top 1R and Bot 2. | |
| 49 | Thur 2-14 12:05 | Thur 2-14 12:11 | - | need table | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of Top 1R and Bot 2. Top Scintillator position corrected. False test!! | |
| 50 | Thur 2-14 12:22 | Thur 2-14 13:54 | 715 | need table | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of Top 1R and Bot 2. Top Scintillator position corrected. O-01 swap with O-05 ( in the center) | |
| 51 | Thur 2-14 14:06 | Tues 10:25 | 53,704 | need table | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of Top 1R and Bot 2. Top Scintillator position corrected. O-05 in the center. Cable signal form module 2 (adc 1) changed to adc 24 Scint Bot1 was not connected | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_051.gif |
| 52 | Tues 2-19 10:37 | Tues 10:50 | 82 | need table | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of Top 1R and Bot 2. Top Scintillator position corrected. O-05 swapped with O-02 ( in the center). Scint Bot1 still not connected (need a 54 ns delay cable) | |
| 53 | Tues 2-19 11:07 | Tues 2-19 11:24 | 137 | need table | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of Top 1R and Bot 2. Top Scintillator position corrected. O-02 in the center. Scint Bot1 connected. BAD CONNECTION CABLE OF Scint Bot1 | |
| 54 | Tues 2-19 11:40 | Thur 2-21 11:16 | 20664 | need table | 1600, 1600, 1600, 1600 | Full Lecroy HV crate. DAQ with trigger an AND of Top 1R and Bot 2. Top Scintillator position corrected. O-02 in the center. Scint Bot1 connected (adc 30) | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_054.gif |
| 55 | Thur 2-21 16:08 | Mon 2-25 16:02 | 42290 | need table | 1600, 1600, 1600, 1600 | O-04 placed in center (swapped with O-02), HV for pmts have been rate matched | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_055.gif |
| 56 | Mon 2-25 16:32 | Tues 2-26 12:08 | 8502 | need table | 1600, 1600, 1600, 1600 | O-04 placed in center, HV for pmts have been rate matched. PMT from module O-01 changed with PMT from module O-04 | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_056.gif |
| 57 | Tues 2-26 12:18 | Wed 2-27 12:00 | 10395 | need table | 1600, 1600, 1600, 1600 | HV on Module O-04 (containing pmt 0-01) set to 1600. HV on module O-01 (containing pmt O-04) set to 1715, HV on M-02C set to 1750 | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_057.gif |
| 58 | Wed 2-27 12:20 | Wed 2-27 16:13 | 1613 | need table | 1600, 1600, 1600, 1600 | PMTs of modules O-04 and O-01 swapped (turning to their original location). Both HV had been set to 1600V as was before run 55. The others had not been changed from run 55 HV table. | |
| 59 | Wed 2-27 16:06 | Thur 2-28 11:57 | 8868 | need table | 1600, 1600, 1600, 1600 | PMTs of modules O-04 and O-01 swapped (turning to their original location). HV on Module O-01 set to 1600. HV on module O-04 set to 1715. The others had not been changed from run 55 HV table. Silent alarm when shut off | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_059.gif |
| 60 | Thur 2-27 12:06 | Fri 3-1 14:47 | 11764 | need table | 1600, 1600, 1600, 1600 | swapped O-03 with O-04 | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_060.gif |
| 61 | Fri 3-1 14:58 | Mon 3-4 16:45 | 32112 | need table | 1600, 1600, 1600, 1600 | swapped M-01(now in center) with O-03. PMT M-01-D and M-03-C voltage increased to 1800V ERROR!!: The Modules with the HV increased were M-03-D and M-01-A. The error was counting the channels in the HV GUI | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_061.gif |
| 62 | Mon 3-4 17:34 | Wed 3-6 ~14:00 | ~20800 | need table | 1600, 1600, 1600, 1600 | Paddle placed below O-03. PMT from M-01-D replaced -> HV -1730V. The other voltages are the same, except M-03-B->1780V and M-03-D->1750V. CODA was stopped due to a power shutdown, so no finish time detemined | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_062.gif |
| 63 | Wed 3-6 16:36 | Thu 3-7 11:43 | 16946 | need table | 1600, 1600, 1600, 1600 | No small paddle connected. Bottom scintillator was raised closer to the table. M-01-D PMT HV increased to -1700V. Module M-04 swap with M-01 -> M-04 in center M-01 at middle left. O-03 still at bottom center. | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_063.gif |
| 64 | Thu 3-7 11:49 | Mon 3-11 11:24 | 84393 | need table | 1600, 1600, 1600, 1600 | Same as run 64, but scintillators' position corrected to cover better M-04-B and C.Note: I found two cables unplugged, O-05 and M-01-D. Also, is possible there were some signal cables in wrong position (respect to the scheme). I set the cables as the scheme for the next run (Carlos) | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_064.gif |
| 65 | Mon 3-11 12:51 | Tues 3-12 11:07 | 21929 | need table | 1600, 1600, 1600, 1600 | O-03 center, M-01 botton center, M-04 middle left. O-04 hv not connected. Module O-02 has cable 117 (from O-05), O-03 has cable 118 (from O-02), O-05 has cable 49(from O-03) | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_065.gif |
| 66 | Tues 3-12 11:55 | Tues 3-12 15:14 | 2978 | need table | 1600, 1600, 1600, 1600 | ADC cables returned to original modules. HV on O-04 increased by 50V | https://hallaweb.jlab.org/wiki/index.php/Image:Adc_spectra_066.gif |
| 67 | Tues 3-12 15:25 | Tues 3-12 19:01 | 3228 | need table | 1600, 1600, 1600, 1600 | ADC cable cable for M-02B reconnected. HV on O-04 decreased by 50V, HV on O-03 increased 50V | |
| 68 | Tues 3-12 19:04 | Tues 3-12 22:13 | 2778 | need table | 1600, 1600, 1600, 1600 | HV on O-03 increased 50V (-1800V) | |
| 69 | Tues 3-12 22:16 | Wed 3-13 09:58 | 10279 | need table | 1600, 1600, 1600, 1600 | HV on O-03 decreased to-1650V | |
| 70 | Wed 3-13 10:16 | Wed 3-13 14:02 | 5124 | need table | 1600, 1600, 1600, 1600 | O-01 in center, O-03 top right. HV O-01 increased 50V (-1650V) | |
| 71 | Wed 3-13 14:04 | Wed 3-13 19:42 | 5019 | need table | 1600, 1600, 1600, 1600 | HV O-01 increased 50V (-1700V) | |
| 72 | Wed 3-13 19:47 | Thu 3-14 10:34 | 13231 | need table | 1600, 1600, 1600, 1600 | HV O-01 increased 50V (-1750V) | |
| 73 | Thu 3-14 10:38 | Thu 3-14 12:33 | 1734 | need table | 1600, 1600, 1600, 1600 | HV O-01 increased 50V (-1800V) | |
| 74 | Thu 3-14 12:46 | Thu 3-14 15:20 | 2255 | need table | 1600, 1600, 1600, 1600 | O-01 placed in top left, O-05 placed in middle, HV O-05 set to -1650 (from 1800) | |
| 75 | Thu 3-14 15:22 | Thu 3-14 19:06 | 3307 | need table | 1600, 1600, 1600, 1600 | HV O-05 set to -1700V | |
| 76 | Thu 3-14 19:08 | Thu 3-14 20:49 | 1469 | need table | 1600, 1600, 1600, 1600 | HV O-05 set to -1750V | |
| 77 | Thu 3-14 20:50 | Thu-Fri | ~8000 | need table | 1600, 1600, 1600, 1600 | HV O-05 set to -1800V I found the computer off when I arrived today friday. Everything has to be restarted. HV values was taken from the pictures in the wiki (Carlos) | |
| 78 | Fri 3-15 11:07 | Fri 3-15 13:48 | 13555 | need table | 1600, 1600, 1600, 1600 | HV O-05 placed in bottom left, O-02 placed in center. HV O-02 set to -1700V High number of events, but the spectra looks normal. Perhaps a problem from CODA? I checked the front-end electronics (logic and DAQ) and they look normal.(Carlos) | |
| 79 | Fri 3-15 14:09 | Fri 3-15 17:12 | 9855 | need table | 1600, 1600, 1600, 1600 | HV O-02 set to -1750V apparently, the high rate happen in suddenly bursts, it is not continiusly. I cross checked with the output of the other logic module, but now nothings happen. Bogdan had suggested that it could be caused by electronic noise in the Bay and can connect the gate generator to avoid it. Since it looks that all had came to normality, I leave the set up as before.(Carlos). Final Note: Althought the high number of events, the problem looks solved. This high number is because I started the run before the checking. | |
| 80 | Fri 3-15 17:15 | need table | 1600, 1600, 1600, 1600 | HV O-02 set to -1800V |
Photo Electron Table
Only fits with Photo Electron percent error of .15 or less are displayed in table. Red denotes center module for a given run.
| Run Number | Module | Mean | Mean Error | Sigma | Sigma Error (+/-) | Number of Photo Electrons | Photo Electron Error (+/-) |
|---|---|---|---|---|---|---|---|
| 55 | O-01 | 454.546 | 18.5784 | 238.855 | 14.8351 | 3.62148 | 0.538523 |
| 51 | O-02 | 469.25 | 2.97868 | 76.2928 | 3.12961 | 37.8305 | 3.14063 |
| 54 | O-02 | 515.024 | 1.34261 | 69.3861 | 1.42455 | 55.0947 | 2.28043 |
| 55 | O-02 | 596.767 | 5.30139 | 95.9359 | 5.59597 | 38.6944 | 4.56616 |
| 64 | O-02 | 464.037 | 2.86399 | 73.5338 | 2.88502 | 39.8227 | 3.16323 |
| 51 | O-03 | 264.619 | 7.3473 | 89.2805 | 5.0326 | 8.78474 | 1.10399 |
| 55 | O-03 | 366.586 | 7.20312 | 117.004 | 5.08625 | 9.8164 | 0.93659 |
| 60 | O-03 | 635.485 | 2.0946 | 93.2432 | 1.86784 | 46.449 | 1.88595 |
| 61 | O-03 | 607.316 | 1.97804 | 100.665 | 1.98522 | 36.3974 | 1.45504 |
| 62 | O-03 | 607.677 | 3.01966 | 109.182 | 3.33217 | 30.9774 | 1.91573 |
| 63 | O-03 | 668.804 | 2.93831 | 85.0465 | 2.21045 | 61.8422 | 3.26029 |
| 64 | O-03 | 706.673 | 1.28382 | 97.2782 | 1.08622 | 52.7723 | 1.19402 |
| 51 | O-04 | 353.288 | 2.10624 | 58.7741 | 2.22258 | 36.1315 | 2.76643 |
| 54 | O-04 | 353.312 | 2.65331 | 48.6605 | 2.63737 | 52.7187 | 5.76924 |
| 55 | O-04 | 650.665 | 1.15982 | 96.4187 | 1.15395 | 45.5399 | 1.10207 |
| 56 | O-04 | 981.409 | 3.93024 | 136.892 | 4.16247 | 51.3977 | 3.15269 |
| 57 | O-04 | 594.917 | 2.19896 | 81.6447 | 2.14099 | 53.0953 | 2.81219 |
| 59 | O-04 | 610.675 | 2.56594 | 91.4254 | 2.37514 | 44.6156 | 2.34826 |
| 51 | O-05 | 281.658 | 0.53716 | 41.2731 | 0.51039 | 46.5702 | 1.16541 |
| 54 | O-05 | 304.061 | 2.47553 | 44.0867 | 2.65921 | 47.5669 | 5.79028 |
| 55 | O-05 | 670.521 | 5.2752 | 91.5394 | 5.28525 | 53.6548 | 6.25303 |
| 61 | O-05 | 701.645 | 5.99958 | 86.3993 | 5.69911 | 65.9501 | 8.77325 |
| 62 | O-05 | 699.412 | 5.93348 | 79.9847 | 5.94173 | 76.4633 | 11.4341 |
| 64 | O-05 | 681.23 | 5.26812 | 112.89 | 7.25465 | 36.4145 | 4.71396 |
| 62 | M-01A | 741.744 | 4.93275 | 84.7092 | 5.50719 | 76.6739 | 10.0216 |
| 51 | M-01B | 422.995 | 3.5189 | 55.0194 | 2.77485 | 59.107 | 6.04256 |
| 55 | M-01B | 877.6 | 4.39652 | 91.1388 | 3.59559 | 92.7229 | 7.37493 |
| 64 | M-01B | 782.17 | 7.95726 | 105.323 | 7.14845 | 55.1509 | 7.56998 |
| 51 | M-01C | 883.408 | 3.7414 | 115.755 | 4.24036 | 58.2429 | 4.29555 |
| 54 | M-01C | 885.157 | 5.41567 | 102.708 | 5.53496 | 74.2733 | 8.05665 |
| 55 | M-01C | 938.27 | 3.89958 | 103.574 | 3.39709 | 82.064 | 5.42623 |
| 60 | M-01C | 954.194 | 8.9184 | 125.088 | 8.92073 | 58.1888 | 8.37049 |
| 62 | M-01C | 868.305 | 6.73365 | 136.306 | 9.35247 | 40.58 | 5.60412 |
| 62 | M-01D | 403.794 | 4.9346 | 86.9664 | 4.55723 | 21.5584 | 2.32004 |
| 51 | M-02B | 513.039 | 2.35154 | 65.8843 | 2.82223 | 60.6368 | 5.22456 |
| 54 | M-02B | 519.368 | 3.20465 | 65.8375 | 3.7373 | 62.2306 | 7.10672 |
| 55 | M-02B | 738.374 | 3.48718 | 93.2785 | 3.7401 | 62.6599 | 5.05956 |
| 61 | M-02B | 742.421 | 4.36202 | 98.8749 | 4.84979 | 56.3804 | 5.57043 |
| 62 | M-02B | 745.975 | 4.73368 | 92.4042 | 4.54427 | 65.1725 | 6.46327 |
| 63 | M-02B | 726.7 | 5.7932 | 99.2945 | 6.69004 | 53.5624 | 7.26795 |
| 64 | M-02B | 730.188 | 2.67756 | 99.9109 | 3.05635 | 53.4125 | 3.29125 |
| 51 | M-02C | 211.265 | 4.21693 | 56.6299 | 3.92159 | 13.9177 | 2.00605 |
| 55 | M-02C | 212.375 | 3.79891 | 66.4572 | 4.36559 | 10.2123 | 1.39055 |
| 61 | M-02C | 619.848 | 8.94519 | 131.642 | 9.33528 | 22.1708 | 3.20891 |
| 64 | M-02C | 633.034 | 4.56806 | 134.848 | 4.19203 | 22.0377 | 1.4066 |
| 64 | M-04A | 803.175 | 3.02447 | 74.2972 | 2.31096 | 116.863 | 7.32293 |
| 51 | M-04B | 756.44 | 3.94851 | 77.3372 | 3.70996 | 95.6692 | 9.23291 |
| 64 | M-04B | 758.395 | 2.98733 | 81.1218 | 2.80868 | 87.4009 | 6.0912 |
| 51 | M-04C | 429.384 | 3.92941 | 53.8083 | 3.63173 | 63.6785 | 8.67448 |
| 64 | M-04C | 714.632 | 8.16685 | 186.713 | 6.21706 | 14.6493 | 1.03143 |
| 63 | M-04D | 962.039 | 7.82265 | 118.219 | 8.25085 | 66.2235 | 9.30641 |
| 64 | M-04D | 974.558 | 3.18477 | 117.661 | 3.52947 | 68.6046 | 4.14023
|
