HV HowTo for Users
From Hall A Wiki
Revision as of 11:14, 7 January 2014 by Rom (Talk | contribs) (New page: The High Voltage is controlled by LeCroy 1458 crates and associated modules like the 1461N. A trailing "N" means negative, and a "P" means positive HV. To control the HV in Hall A, do th...)
The High Voltage is controlled by LeCroy 1458 crates and associated modules like the 1461N. A trailing "N" means negative, and a "P" means positive HV.
To control the HV in Hall A, do the following
Login as "adev" on the "adaql1" or "adaql2" computers.
cd ~adev/slowc
To run both HRS: ./hvs HRS
To run the Left HRS alone: ./hvs LEFT
To run the Right HRS alone: ./hvs RIGHT
To run the beamline crate: ./hvs BEAMLINE