Crimp Dies for Connectors
Coastel stripping tool headcable typecrimp tooldie for crimp toolconnector
noneRG-59/UAMP 69710AMP 69224-1-DAMP BNC
2-329083-1
(carried in stockroom)
(stock number 593574230)
24-225516Dred jacketed RG-59/UKings KTH-1000Kings KTH-2062Kings SHV
1705-1
(carried in stockroom)
(stock number 593576055)
24-340916BRG-58C/UKings KTH-1000Kings KTH-2001Amphenol BNC
31-320
24-183128BRG-58C/UKings KTH-1000Kings KTH-2027
(note 5)
LEMO
FFS.00.250.CTCE52
noneRG-58C/UKings KTH-1000Kings KTH-2027Kings K-LOC
1075-2
(note 6)
24-182831BRG-58C/UAMP 69710AMP 69223-1-DAMP BNC
2-329082-1
(carried in stockroom)
noneIEEE 802.3Kings KTH-1000Kings KTH-2001Kings BNC
KC-59-291
noneIEEE 802.3Kings KTH-1000Kings KTH-2001Amphenol BNC
31-320
noneLASL Type C-9Y19503Kings KTH-1000Kings KTH-2001Kings 10kV
1065-2
noneLASL Type C-9Y19503 & RG-58Kings KTH-1000Kings KTH-2061Kings SHV
1705-2
(note 1)
24-280000ERG-213nonenoneAmphenol N
82-67
(note 2)
noneRG-174AMP 69710AMP 69422-DAMP BNC
2-330058-1
(carried in stockroom)
noneRG-174AMP 69710AMP 69422-DAMP BNC
2-330061-1
(carried in stockroom)
noneRG-174Kings KTH-1000Kings KTH-2082LEMO and K-LOC
noneRG-174Kings KTH-1000Kings KTH-2032one of the Kings BNC connectors
noneFlat RibbonAMP 543265-1RCPT&SR (upper plate) with RCPT (locator plate)
(note 3)
3M 34 pin headers
noneCheap CATV RG-59UAMP 69710AMP 69224-1-DAMP BNC
2-329083-1
(carried in stockroom)
(note 4)
Note 1: Center pin of connector must be reamed out to fit on center conductor of cable.
Note 2: Center pin is soldered and nut holds braid.
Note 3: Set fine adjustment to 5.
Note 4: Wind braid up a bit before crimping.
Note 5: Use a small 5 mil shim in the die when crimping the center pin. The crimp is not tight enough.
Note 6: Pull center pin out, insert cable, trim center conductor, reinsert center pin, then crimp.

Back to Jack's Notes