Docs

General Documents:

• BigBite Timing hodoscope Technical Specifications (design and performance requirements), J. Annand et al. [[1]]
• Software requirements, R. Montgomery et al. [[2]]
• High voltage and low voltage set up and operation for hodoscope in TEDf with cosmics, J. Annand et al. [[3]]
• Original electronics plan (describes chain from PMT to final VME readout, including high voltage and low voltage)[[4]]
• Scintillator bar and light guide surface roughening tests in Glasgow 2020, R. Montgomery et al. [[5]]

Mapping Documents:

• Updated mapping for cosmics running 2021 currently in preparation
• High voltage and low voltage mapping up to Feb 2019 description (layout OUTDATED, will remove when new mapping uploaded) [[6]]
• Accompanying high voltage and low voltage mapping up to Feb 2019 excel sheet (layout OUTDATED, will remove when new mapping uploaded) [[7]]

Schematics:

• HV patch panels, J. Annand, A. Clarkson [[8]]
• Schematic for LV distributor panel is found in figure 5 of "Original electronics plan" document listed in general documents above
• Schematic for PMT bases is found in figure 3 of "Original electronics plan" document listed in general documents above
• Schematic of NINO front end cards is found in figure 4 of "Original electronics plan" document listed in general documents above

Manuals/Spec sheets for component:

• Electron Tubes ET9124 SB PMTs
• Eljen EJ200 Scintillator bars [[9]]
• HV connectors at HV patch panel end [[10]]
• DYMAX optical cure epoxy - check which model was used in Jlab repairs
• CAEN V792 [[11]]
• CAEN V1190 [[12]]
• CAEN SY1527LC mainframe [[13]]
• CAEN A1932A HV distributer modules
• AGILENT N5761A DC power supply unit [[14]]
• Wiener VME64x6023 crate