Docs

General Documents

• BigBite Timing hodoscope Technical Specifications (design and performance requirements), J. Annand et al. [[1]]
• Software requirements, R. Montgomery et al. [[2]]
• High voltage and low voltage set up and operation for hodoscope in TEDf with cosmics, J. Annand et al. [[3]]
• Original electronics plan (describes chain from PMT to final VME readout, including high voltage and low voltage)[[4]]
• Scintillator bar and light guide surface roughening tests in Glasgow 2020, R. Montgomery et al. [[5]]

Mapping Documents

• Updated mapping for cosmics running 2021 currently in preparation
• High voltage and low voltage mapping up to Feb 2019 description (layout OUTDATED, will remove when new mapping uploaded) [[6]]
• Accompanying high voltage and low voltage mapping up to Feb 2019 excel sheet (layout OUTDATED, will remove when new mapping uploaded) [[7]]

Schematics

• HV patch panels, J. Annand, A. Clarkson [[8]]
• Schematic for LV distributor panel is found in figure 5 of "Original electronics plan" document listed in general documents above
• Schematic for PMT bases is found in figure 3 of "Original electronics plan" document listed in general documents above
• Schematic of NINO front end cards is found in figure 4 of "Original electronics plan" document listed in general documents above

Manuals/Spec sheets for components of hodoscope

• Electron Tubes ET9124 SB type PMTs [[9]]
• Eljen Technology EJ200 scintillator bars [[10]]
• Eljen technology UVT acrylic light guides [[11]]
• DYMAX optical cure epoxy - check which specific model number was used in Jlab repairs
• Cage HV connectors at HV patch panel connections [[12]]
• CAEN V792 [[13]]
• CAEN V1190 [[14]]
• CAEN SY1527LC HV mainframe, 19" wide, 8U [[15]]
• CAEN A1932AN 48 channel HV distributer modules - these manuals on CAEN website are corrupted - investigating
• CAEN A1531 primary PSU for HV mainframe
• AGILENT N5761A DC power supply unit for NINO front end cards, 19" wide, 1U,, rack-mountable [[16]]
• Wiener 6U VME64x 6023 crate