Friday

320313 04/30/10 23:50  apar           Start_Parity_Run_3331__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: RHWP scan. PITA 120. IHWP OUT, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320312 04/30/10 23:40  apar           End_of_Parity_Run_3330__CODA_Config=CHInj2
320311 04/30/10 23:19  apar           Start_Parity_Run_3330__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: RHWP scan. PITA 0. IHWP OUT, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320310 04/30/10 23:03  apar           End_of_Parity_Run_3329__CODA_Config=CHInj2
320309 04/30/10 22:57  apar           Start_Parity_Run_3329__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: RHWP scan. PITA 0. IHWP OUT, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320308 04/30/10 22:55  apar           End_of_Parity_Run_3328__CODA_Config=CHInj2
320307 04/30/10 22:06  apar           Start_Parity_Run_3328__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: Pockels Cell Off. IHWP OUT, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320306 04/30/10 22:01  apar           End_of_Parity_Run_3327__CODA_Config=CHInj2
320305 04/30/10 21:54  apar           Start_Parity_Run_3327__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: Pockels Cell Translation Scan in Y IHWP OUT, PITA 0, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320304 04/30/10 21:51  apar           End_of_Parity_Run_3326__CODA_Config=CHInj2
320303 04/30/10 21:50  apar           Start_Parity_Run_3326__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: Pockels Cell Translation Scan in Y IHWP OUT, PITA 0, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320302 04/30/10 21:48  apar           End_of_Parity_Run_3325__CODA_Config=CHInj2
320301 04/30/10 21:40  apar           Start_Parity_Run_3325__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: Pockels Cell Translation Scan in X IHWP OUT, PITA 0, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320300 04/30/10 21:35  apar           End_of_Parity_Run_3324__CODA_Config=CHInj2
320299 04/30/10 21:27  apar           Start_Parity_Run_3324__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: Pockels Cell Translation Scan in Y IHWP IN, PITA 0, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320298 04/30/10 21:25  apar           End_of_Parity_Run_3323__CODA_Config=CHInj2
320297 04/30/10 21:11  apar           Start_Parity_Run_3323__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector Studies:: Pockels Cell Translation Scan in X IHWP IN, PITA 0, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320296 04/30/10 21:09  apar           End_of_Parity_Run_3322__CODA_Config=CHInj2
320295 04/30/10 20:48  apar           Start_Parity_Run_3322__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector studies::RHWP scan, IHWP IN, PITA 120, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320294 04/30/10 20:44  apar           End_of_Parity_Run_3321__CODA_Config=CHInj2
320293 04/30/10 20:23  apar           Start_Parity_Run_3321__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector studies::RHWP scan, IHWP IN, PITA 0, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320292 04/30/10 20:23  dalton         IT changed for 120 Hz
320291 04/30/10 20:17  Jack (Techs)   Pillage first THEN burn (Right Dipole is responding)
320290 04/30/10 20:13  apar           End_of_Parity_Run_3320__CODA_Config=CHInj2
320289 04/30/10 19:49  apar           Start_Parity_Run_3320__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector studies::RHWP scan, IHWP OUT, PITA 120, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320288 04/30/10 19:47  apar           End_of_Parity_Run_3319__CODA_Config=CHInj2
320287 04/30/10 19:27  apar           Start_Parity_Run_3319__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector studies::RHWP scan, IHWP OUT, PITA zero, Helicity Freq: 120.48Hz,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320286 04/30/10 19:20  apar           End_of_Parity_Run_3318__CODA_Config=CHInj2
320285 04/30/10 19:06  apar           Start_Parity_Run_3318__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector studies::RHWP scan, IHWP in, PITA zero,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320284 04/30/10 19:05  dalton         Reversal rate changed to 120 Hz with long T_settle
320292 04/30/10 20:23  dalton         IT changed for 120 Hz
320283 04/30/10 19:01  apar           End_of_Parity_Run_3317__CODA_Config=CHInj2
320282 04/30/10 18:41  apar           Start_Parity_Run_3317__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector studies::RHWP scan, IHWP in, PITA zero,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320281 04/30/10 18:39  apar           End_of_Parity_Run_3316__CODA_Config=CHInj2
320280 04/30/10 18:30  M Friend       Compton photon detector lead hut
320279 04/30/10 18:14  apar           Start_Parity_Run_3316__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector studies::RHWP scan, IHWP in, PITA zero,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320278 04/30/10 18:02  apar           End_of_Parity_Run_3315__CODA_Config=CHInj2
320277 04/30/10 17:50  auto_snap      Temperatures snapshot
320276 04/30/10 17:50  auto_snap      Radiation and Ozone snapshot
320275 04/30/10 17:50  auto_snap      Miscellaneous snapshot
320274 04/30/10 17:49  auto_snap      Hall A Tools snapshot
320273 04/30/10 17:49  auto_snap      Compton Polarimeter snapshot
320272 04/30/10 17:49  auto_snap      BigBox Magnet snapshot
320271 04/30/10 17:49  auto_snap      Beam Position and Current snapshot
320270 04/30/10 17:42  Jack (Techs)   Right Dipole status
320291  04/30/10 20:17  Jack (Techs)   Pillage first THEN burn (Right Dipole is responding)
320269 04/30/10 17:37  apar           Start_Parity_Run_3315__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Injector studies::RHWP scan, IHWP in, PITA zero,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320268 04/30/10 17:17  apar           End_of_Parity_Run_3314__CODA_Config=CHInj2
320267 04/30/10 17:11  apar           Start_Parity_Run_3314__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Forced gains on BPMs. Injector studies. Pedestal calibrations.,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320266 04/30/10 16:57  apar           End_of_Parity_Run_3313__CODA_Config=CHInj2
320265 04/30/10 16:48  apar           Start_Parity_Run_3313__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Forced gains on BPMs. Injector studies. Pedestal calibrations.,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320264 04/30/10 16:47  apar           End_of_Parity_Run_3312__CODA_Config=CHInj2
320263 04/30/10 16:45  apar           Start_Parity_Run_3312__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Forced gains on BPMs. Injector studies. Pedestal calibrations.,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320262 04/30/10 16:44  apar           End_of_Parity_Run_3311__CODA_Config=CHInj2
320261 04/30/10 16:43  apar           Start_Parity_Run_3311__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Forced gains on BPMs. Injector studies. Pedestal calibrations.,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320260 04/30/10 16:32  apar           End_of_Parity_Run_3310__CODA_Config=CHInj2
320259 04/30/10 16:29  apar           Start_Parity_Run_3310__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Forced gains on BPMs. Injector studies. Pedestal calibrations.,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320258 04/30/10 16:19  apar           End_of_Parity_Run_3309__CODA_Config=CHInj2
320257 04/30/10 16:17  apar           Start_Parity_Run_3309__CODA_Config=CHInj2_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Forced gains on BPMs. Injector studies. Pedestal calibrations.,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320256 04/30/10 16:13  apar           End_of_Parity_Run_3304__CODA_Config=PrexNoQweak
320255 04/30/10 16:04  apar           End_of_Parity_Run_3308__CODA_Config=PrexNoQweak
320254 04/30/10 15:25  apar           Start_Parity_Run_3308__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD scan,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320253 04/30/10 15:24  apar           End_of_Parity_Run_3307__CODA_Config=PrexNoQweak
320252 04/30/10 15:24  apar           Start_Parity_Run_3307__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD scan,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320251 04/30/10 15:21  apar           End_of_Parity_Run_3306__CODA_Config=PrexNoQweak
320250 04/30/10 15:15  apar           Start_Parity_Run_3306__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD scan,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320249 04/30/10 15:10  apar           Start_Parity_Run_3305__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - set up for RD scan,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320248 04/30/10 15:04  O.Glamazdin    Moller magnet has been filled
320247 04/30/10 13:39  apar           Start_Parity_Run_3304__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=300,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320246 04/30/10 13:37  apar           End_of_Parity_Run_3303__CODA_Config=PrexNoQweak
320245 04/30/10 13:23  apar           Start_Parity_Run_3303__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=300, no DACnoise,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320244 04/30/10 12:36  paschke        gas system alarm / Tech
320243 04/30/10 12:34  apar           End_of_Parity_Run_3302__CODA_Config=PrexNoQweak
320242 04/30/10 12:11  apar           Start_Parity_Run_3302__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=300, no DACnoise,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320241 04/30/10 12:09  apar           End_of_Parity_Run_3301__CODA_Config=PrexNoQweak
320240 04/30/10 12:07  apar           Start_Parity_Run_3301__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=1200,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320239 04/30/10 12:05  apar           End_of_Parity_Run_3300__CODA_Config=PrexNoQweak
320238 04/30/10 12:03  apar           Start_Parity_Run_3300__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=100,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320237 04/30/10 12:01  apar           End_of_Parity_Run_3299__CODA_Config=PrexNoQweak
320236 04/30/10 12:01  apar           Start_Parity_Run_3299__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=1500,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320235 04/30/10 11:59  apar           End_of_Parity_Run_3298__CODA_Config=PrexNoQweak
320234 04/30/10 11:58  R. Michaels    raster timing check
320233 04/30/10 11:58  apar           Start_Parity_Run_3298__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=1000,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320232 04/30/10 11:56  apar           End_of_Parity_Run_3297__CODA_Config=PrexNoQweak
320231 04/30/10 11:56  apar           Start_Parity_Run_3297__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=500,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320230 04/30/10 11:54  apar           End_of_Parity_Run_3296__CODA_Config=PrexNoQweak
320229 04/30/10 11:53  apar           Start_Parity_Run_3296__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=400,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320228 04/30/10 11:52  apar           End_of_Parity_Run_3295__CODA_Config=PrexNoQweak
320227 04/30/10 11:51  apar           Start_Parity_Run_3295__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=300,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320226 04/30/10 11:49  apar           End_of_Parity_Run_3294__CODA_Config=PrexNoQweak
320225 04/30/10 11:49  R. Michaels    story of cavities (fixed now, we think)
320224 04/30/10 11:48  apar           Start_Parity_Run_3294__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm - RD=200,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320223 04/30/10 11:46  apar           End_of_Parity_Run_3293__CODA_Config=PrexNoQweak
320222 04/30/10 11:41  apar           Start_Parity_Run_3293__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320221 04/30/10 11:39  apar           Start_Parity_Run_3292__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320220 04/30/10 11:38  apar           End_of_Parity_Run_3292__CODA_Config=PrexNoQweak
320219 04/30/10 11:35  apar           End_of_Parity_Run_3291__CODA_Config=PrexNoQweak
320218 04/30/10 11:35  fanning        Beam Time Accounting
320217 04/30/10 11:29  apar           Start_Parity_Run_3291__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320216 04/30/10 11:28  apar           End_of_Parity_Run_3290__CODA_Config=PrexNoQweak
320215 04/30/10 11:20  apar           Start_Parity_Run_3290__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320214 04/30/10 11:18  apar           End_of_Parity_Run_3289__CODA_Config=PrexNoQweak
320213 04/30/10 11:09  apar           Start_Parity_Run_3289__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320212 04/30/10 11:06  apar           End_of_Parity_Run_3288__CODA_Config=PrexNoQweak
320211 04/30/10 11:06  apar           Start_Parity_Run_3288__CODA_Config=PrexNoQweak_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pulse tests - right arm,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320210 04/30/10 09:49  auto_snap      Temperatures snapshot
320209 04/30/10 09:49  auto_snap      Radiation and Ozone snapshot
320208 04/30/10 09:49  auto_snap      Miscellaneous snapshot
320207 04/30/10 09:49  auto_snap      Hall A Tools snapshot
320206 04/30/10 09:49  auto_snap      Compton Polarimeter snapshot
320205 04/30/10 09:49  auto_snap      BigBox Magnet snapshot
320204 04/30/10 09:49  auto_snap      Beam Position and Current snapshot
320203 04/30/10 08:38  kelleher       Target Moved to Empty Position
320202 04/30/10 01:49  auto_snap      Temperatures snapshot
320201 04/30/10 01:49  auto_snap      Radiation and Ozone snapshot
320200 04/30/10 01:49  auto_snap      Miscellaneous snapshot
320199 04/30/10 01:49  auto_snap      Hall A Tools snapshot
320198 04/30/10 01:49  auto_snap      Compton Polarimeter snapshot
320197 04/30/10 01:49  auto_snap      BigBox Magnet snapshot
320196 04/30/10 01:48  auto_snap      Beam Position and Current snapshot

Thursday

320195 04/29/10 17:48  auto_snap      Temperatures snapshot
320194 04/29/10 17:48  auto_snap      Radiation and Ozone snapshot
320193 04/29/10 17:48  auto_snap      Miscellaneous snapshot
320192 04/29/10 17:48  auto_snap      Hall A Tools snapshot
320191 04/29/10 17:48  auto_snap      Compton Polarimeter snapshot
320190 04/29/10 17:48  auto_snap      BigBox Magnet snapshot
320189 04/29/10 17:48  auto_snap      Beam Position and Current snapshot
320188 04/29/10 17:42  apar           End_of_Parity_Run_3286__CODA_Config=Prex
320187 04/29/10 17:29  kelleher       NO Running in Hall A tonight
320186 04/29/10 16:59  Abdurahim      Compton cavity status
320185 04/29/10 13:21  ZAFAR AHMED    Current cavities are satuarting
320184 04/29/10 11:31  ZAFAR AHMED    April 29 Day Shift Summary
320183 04/29/10 11:21  Abdurahim      Compton cavity lock came back...
320182 04/29/10 11:19  kelleher       Shifts Cancelled Until May 1 Swing
320181 04/29/10 11:07  ZAFAR AHMED    Restricted access for hall A
320180 04/29/10 10:49  apar           Start_Parity_Run_3286__CODA_Config=Prex_Run_type=Production,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320179 04/29/10 10:48  A. Camsonne    Compton electron detector hit pattern
320178 04/29/10 10:47  apar           End_of_Parity_Run_3285__CODA_Config=Prex
320177 04/29/10 10:35  A. Camsonne    Compton electron detector threshold scan
320176 04/29/10 10:32  apar           Start_Parity_Run_3285__CODA_Config=Prex_Run_type=Production,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320175 04/29/10 10:31  ZAFAR AHMED    Current cavity coorelation
320174 04/29/10 10:30  apar           End_of_Parity_Run_3284__CODA_Config=Prex
320173 04/29/10 09:48  auto_snap      Temperatures snapshot
320172 04/29/10 09:48  auto_snap      Radiation and Ozone snapshot
320171 04/29/10 09:48  auto_snap      Miscellaneous snapshot
320170 04/29/10 09:48  auto_snap      Hall A Tools snapshot
320169 04/29/10 09:48  auto_snap      Compton Polarimeter snapshot
320168 04/29/10 09:48  auto_snap      BigBox Magnet snapshot
320167 04/29/10 09:48  auto_snap      Beam Position and Current snapshot
320166 04/29/10 09:42  O.Glamazdin    Moller magnet has been refilled
320165 04/29/10 09:41  apar           Start_Parity_Run_3284__CODA_Config=Prex_Run_type=Production,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320164 04/29/10 09:39  apar           End_of_Parity_Run_3283__CODA_Config=Prex
320163 04/29/10 09:25  ZAFAR AHMED    Controlled access
320162 04/29/10 09:22  A. Camsonne    Compton detector threshold check - looks good
320161 04/29/10 08:48  apar           Start_Parity_Run_3283__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320160 04/29/10 08:47  apar           End_of_Parity_Run_3282__CODA_Config=Prex
320159 04/29/10 08:22  M Friend       Compton cavity locking in wrong mode
320158 04/29/10 08:09  V. Sulkosky    Owl Shift Summary
320157 04/29/10 08:05  adaq           Beam Time Accounting
320156 04/29/10 08:00  deng           stripcharts of target
320155 04/29/10 07:57  D.Wang         IHWP put IN
320154 04/29/10 07:56  apar           Start_Parity_Run_3282__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320153 04/29/10 07:54  apar           Halfwave plate IN, Slug 100
320152 04/29/10 07:52  apar           End_of_Parity_Run_3281__CODA_Config=Prex
320151 04/29/10 07:52  M Friend       Compton HV back on
320150 04/29/10 07:38  V. Sulkosky    Temperatures
320149 04/29/10 07:24  V. Sulkosky    No Trips 3 Hours 15'
320148 04/29/10 07:02  apar           Start_Parity_Run_3281__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320147 04/29/10 07:01  apar           End_of_Parity_Run_3280__CODA_Config=Prex
320146 04/29/10 06:11  apar           Start_Parity_Run_3280__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320145 04/29/10 06:10  apar           End_of_Parity_Run_3279__CODA_Config=Prex
320144 04/29/10 06:02  Ole Hansen     adaql5 often runs out of memory
320143 04/29/10 05:38  V. Sulkosky    Raster Test Postponed
320142 04/29/10 05:20  apar           Start_Parity_Run_3279__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320141 04/29/10 05:19  apar           End_of_Parity_Run_3278__CODA_Config=Prex
320140 04/29/10 05:10  V. Sulkosky    Hall A FastFeedback Problems Summary from ELOG
320139 04/29/10 05:04  V. Sulkosky    BTA Claiming no ABU
320138 04/29/10 05:02  D.Wang         Current and Charge from prompt analysis?
320137 04/29/10 04:37  V. Sulkosky    Rad/beam position Charts
320136 04/29/10 04:29  apar           Start_Parity_Run_3278__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320135 04/29/10 04:28  apar           End_of_Parity_Run_3277__CODA_Config=Prex
320134 04/29/10 04:19  V. Sulkosky    Target Vacuum
320133 04/29/10 04:14  V. Sulkosky    Lumi HV's Still Off 
320132 04/29/10 04:11  D.Wang         dithering plots
320131 04/29/10 04:07  V. Sulkosky    Hall A Tools Screen
320130 04/29/10 03:39  apar           Start_Parity_Run_3277__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=carbon production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320129 04/29/10 03:34  deng           target moved to thick carbon for production
320128 04/29/10 03:33  D.Wang         spot++
320127 04/29/10 03:32  a-onl          End_of_Run_27535
320126 04/29/10 03:30  D.Wang         T5 rate 5nA with lead target
320125 04/29/10 03:30  a-onl          Start_Run_27535,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5 nA,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
320124 04/29/10 03:29  a-onl          End_of_Run_27534
320123 04/29/10 03:29  a-onl          Start_Run_27534,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
320122 04/29/10 03:24  D.Wang         T5 rate at 5nA
320121 04/29/10 03:23  Deng           Target moved to Lead/Diamond
320120 04/29/10 03:15  Deng           Target moved to BeO
320119 04/29/10 03:11  D.Wang         spot++
320118 04/29/10 03:09  apar           End_of_Parity_Run_3276__CODA_Config=Prex
320117 04/29/10 03:08  a-onl          Start_Run_27533,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
320116 04/29/10 03:07  a-onl          End_of_Run_27527
320115 04/29/10 03:00  V. Sulkosky    Beam Permit
320114 04/29/10 02:56  V. Sulkosky    Beam Maybe soon!
320113 04/29/10 02:19  apar           Start_Parity_Run_3276__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pedestal,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320112 04/29/10 02:18  apar           End_of_Parity_Run_3275__CODA_Config=Prex
320111 04/29/10 01:48  auto_snap      Temperatures snapshot
320110 04/29/10 01:47  auto_snap      Radiation and Ozone snapshot
320109 04/29/10 01:47  auto_snap      Miscellaneous snapshot
320108 04/29/10 01:47  auto_snap      Hall A Tools snapshot
320107 04/29/10 01:47  auto_snap      Compton Polarimeter snapshot
320106 04/29/10 01:47  auto_snap      BigBox Magnet snapshot
320105 04/29/10 01:47  auto_snap      Beam Position and Current snapshot
320104 04/29/10 01:31  D.Wang         rebooted CODA
320103 04/29/10 01:28  apar           Start_Parity_Run_3275__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pedestal,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320102 04/29/10 01:24  apar           End_of_Parity_Run_3273__CODA_Config=Prex
320101 04/29/10 01:06  apar           Start_Parity_Run_3273__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pedestal,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320100 04/29/10 01:05  apar           End_of_Parity_Run_3272__CODA_Config=Prex
320099 04/29/10 00:49  V. Sulkosky    Beam Update
320098 04/29/10 00:20  V. Sulkosky    Hall Tools
320097 04/29/10 00:16  apar           Start_Parity_Run_3272__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=pedestal,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
320096 04/29/10 00:01  A. Deur        Swing Shift Summary
320095 04/29/10 00:01  adaq           Beam Time Accounting

Wednesday

320094 04/28/10 23:57  paschke        retry log entry: oversampling and "pinhole" scan in integration window
320093 04/28/10 23:57  paschke        retry log entry: oversampling and "pinhole" scan in integration window
320092 04/28/10 23:49  adaq           2nd Vacuum jump
320091 04/28/10 23:29  Carlos         Target snashot
320090 04/28/10 23:25  R. Michaels    raster unsynched, then no beam.
320089 04/28/10 22:54  A. Camsonne    Plot for the Compton electron spectrum are in entry 319934
320088 04/28/10 22:53  mercado        Turned off LUMI voltages
320133  04/29/10 04:14  V. Sulkosky    Lumi HV's Still Off 
320087 04/28/10 22:47  A. Camsonne    GSO HV tripped
320086 04/28/10 22:46  mercado        Check correlations at 50uA on PREX target
320085 04/28/10 22:37  a-onl          End_of_Run_27532
320084 04/28/10 22:36  a-onl          Start_Run_27532,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
320083 04/28/10 22:30  A. Camsonne    Compton GSO on at 10 uA and 50 uA
320082 04/28/10 22:28  R. Michaels    Pb noise tests, raster synched.
320081 04/28/10 22:27  apar           End_of_Parity_Run_3271__CODA_Config=Prex
320080 04/28/10 22:20  apar           Start_Parity_Run_3271__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text= test, IT = 1535 ,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
320079 04/28/10 22:17  mercado        Checking correlations at 10uA on PREX target
320078 04/28/10 22:16  apar           End_of_Parity_Run_3270__CODA_Config=Prex
320077 04/28/10 22:06  ZAFAR AHMED    Cavity Coorelation
320076 04/28/10 22:06  apar           Start_Parity_Run_3270__CODA_Config=Prex_Run_type=Production,beam_current=10,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Production, IT = 1535 correct hv,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
320075 04/28/10 22:03  apar           End_of_Parity_Run_3269__CODA_Config=Prex
320074 04/28/10 21:58  apar           Start_Parity_Run_3269__CODA_Config=Prex_Run_type=Production,beam_current=10,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Production, IT = 1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
320073 04/28/10 21:57  apar           End_of_Parity_Run_3268__CODA_Config=Prex
320072 04/28/10 21:46  a-onl          End_of_Run_27531
320071 04/28/10 21:45  apar           Start_Parity_Run_3268__CODA_Config=Prex_Run_type=Production,beam_current=10,beam_energy=1.063,beam_polarization=90,beam_raster=on,comment_text=Production, IT = 1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
320070 04/28/10 21:43  Carlos         Huge vacuum jump when beam on lead
320069 04/28/10 21:43  a-onl          End_of_Run_6758
320068 04/28/10 21:39  a-onl          Start_Run_6758,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=10.,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=test run
320067 04/28/10 21:37  A. Deur        Laser attenuator/Slit values for ~5nA
320066 04/28/10 21:35  R. Michaels    spot++ for Pb/D.  Hole
320065 04/28/10 21:33  a-onl          Start_Run_6757,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=junk
320064 04/28/10 21:31  a-onl          Start_Run_27531,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=junk
320063 04/28/10 21:31  a-onl          End_of_Run_6757
320062 04/28/10 21:30  a-onl          Start_Run_27530,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
320061 04/28/10 21:30  a-onl          End_of_Run_27530
320060 04/28/10 21:08  A. Deur        Raster size
320059 04/28/10 20:57  apar           End_of_Parity_Run_3267__CODA_Config=Prex
320058 04/28/10 20:55  ZAFAR AHMED    Cavity Pregains and Phases for 50 uA.
320185 04/29/10 13:21  ZAFAR AHMED    Current cavities are satuarting
320057 04/28/10 20:35  A. Deur        Septum on
320056 04/28/10 20:12  apar           Start_Parity_Run_3267__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, IT = 1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320055 04/28/10 20:09  apar           Start_Parity_Run_3266__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, IT = 1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320054 04/28/10 20:09  apar           End_of_Parity_Run_3266__CODA_Config=Prex
320053 04/28/10 20:07  apar           End_of_Parity_Run_3265__CODA_Config=Prex
320052 04/28/10 19:00  O.Glamazdin    Moller results
320051 04/28/10 18:19  dalton         Slugs moved
320050 04/28/10 18:08  Abdurahim      Compton cavity power history plot
320049 04/28/10 17:58  jwexler        Changed feedback curmon device to bcm3
320048 04/28/10 17:56  apar           Start_Parity_Run_3265__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, IT = 1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320047 04/28/10 17:50  apar           End_of_Parity_Run_3264__CODA_Config=Prex
320046 04/28/10 17:47  auto_snap      Temperatures snapshot
320045 04/28/10 17:47  auto_snap      Radiation and Ozone snapshot
320044 04/28/10 17:47  auto_snap      Miscellaneous snapshot
320043 04/28/10 17:47  auto_snap      Hall A Tools snapshot
320042 04/28/10 17:47  auto_snap      Compton Polarimeter snapshot
320041 04/28/10 17:47  auto_snap      BigBox Magnet snapshot
320040 04/28/10 17:47  auto_snap      Beam Position and Current snapshot
320039 04/28/10 17:42  M Friend       Compton HV off
320038 04/28/10 17:41  apar           Start_Parity_Run_3264__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, IT = 1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320037 04/28/10 17:39  apar           End_of_Parity_Run_3263__CODA_Config=Prex
320036 04/28/10 17:36  M Friend       Compton FADC DAQ to 240Hz
320035 04/28/10 17:35  R.Michaels     re: 15V supply on cavities (no cavities since Sunday afternoon)
320034 04/28/10 17:27  apar           Start_Parity_Run_3263__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, IT = 1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320033 04/28/10 17:26  paschke        green monster doesn't update display automatically: timeboard parameters may display incorrect after coda download
320032 04/28/10 17:26  apar           End_of_Parity_Run_3262__CODA_Config=Prex
320031 04/28/10 17:23  apar           Start_Parity_Run_3262__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Testing feedback - no low beam cut,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320030 04/28/10 17:23  M Friend       EDET to garage
320029 04/28/10 17:22  apar           End_of_Parity_Run_3261__CODA_Config=Prex
320028 04/28/10 17:18  apar           Start_Parity_Run_3261__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320027 04/28/10 17:17  apar           End_of_Parity_Run_3260__CODA_Config=Prex
320026 04/28/10 17:16  M Friend       EDET to -3mm
320025 04/28/10 16:24  ZAFAR AHMED    Cavity oscillator power supply is on
320035  04/28/10 17:35  R.Michaels     re: 15V supply on cavities (no cavities since Sunday afternoon)
320024 04/28/10 16:09  M Friend       EDET to garage for access
320023 04/28/10 15:54  M Friend       EDET to -3 mm
320024 04/28/10 16:09  M Friend       EDET to garage for access
320022 04/28/10 14:29  nanda          Electron Spectrum
320089  04/28/10 22:54  A. Camsonne    Plot for the Compton electron spectrum are in entry 319934
320021 04/28/10 14:16  M Friend       Compton FADC DAQ to 30Hz
320036 04/28/10 17:36  M Friend       Compton FADC DAQ to 240Hz
320020 04/28/10 14:08  R. Michaels    re: timing board parameters
320033  04/28/10 17:26  paschke        green monster doesn't update display automatically: timeboard parameters may display incorrect after coda download
320019 04/28/10 13:46  Abdurahim      dithering related problem
320018 04/28/10 13:42  apar           Start_Parity_Run_3260__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320017 04/28/10 13:41  apar           End_of_Parity_Run_3259__CODA_Config=Prex
320016 04/28/10 13:38  mercado        Cavity BCMs still not working
320015 04/28/10 13:31  mercado        IT was not set properly for Injector
320014 04/28/10 13:26  mercado        Feedback did not work this morning
320013 04/28/10 13:18  Abdurahim      bcmcav2 & bcmcav3 ASym
320016 04/28/10 13:38  mercado        Cavity BCMs still not working
320012 04/28/10 13:09  mercado        Dither related glitch
320019 04/28/10 13:46  Abdurahim      dithering related problem
320011 04/28/10 12:11  Abdurahim      a strange A_t detector histograms
320010 04/28/10 11:33  O.Glamazdin    BPM 1HO1 reading is very noisy
320009 04/28/10 10:21  O.Glamazdin    Helicity board changes for Moller
320008 04/28/10 10:21  Fansler/folt   target vacuum
320007 04/28/10 09:59  apar           Start_Parity_Run_3259__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
320006 04/28/10 09:58  apar           End_of_Parity_Run_3258__CODA_Config=Prex
320005 04/28/10 09:52  O.Glamazdin    Moller magnet has been refilled
320004 04/28/10 09:47  Ole Hansen     adaql8 display/mouse fixed
320003 04/28/10 09:47  auto_snap      Miscellaneous snapshot
320002 04/28/10 09:47  R.M., W. Gun   raster synched to helicity flip
320001 04/28/10 09:47  auto_snap      Hall A Tools snapshot
320000 04/28/10 09:47  auto_snap      Compton Polarimeter snapshot
319999 04/28/10 09:46  auto_snap      BigBox Magnet snapshot
319998 04/28/10 09:46  auto_snap      Beam Position and Current snapshot
319997 04/28/10 09:33  ZAFAR AHMED    Target is empty target.
319996 04/28/10 09:29  romanip        Rebooting Moller VME Crate
319995 04/28/10 09:07  apar           Start_Parity_Run_3258__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319994 04/28/10 09:05  apar           End_of_Parity_Run_3257__CODA_Config=Prex
319993 04/28/10 08:49  R. Michaels    re: how to setup and check cavities
320058 04/28/10 20:55  ZAFAR AHMED    Cavity Pregains and Phases for 50 uA.
319992 04/28/10 08:31  apar           Start_Parity_Run_3257__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319991 04/28/10 08:29  apar           End_of_Parity_Run_3256__CODA_Config=Prex
319990 04/28/10 08:16  W. Deconinck   adaql8: no graphical interface, mouse problem
320004  04/28/10 09:47  Ole Hansen     adaql8 display/mouse fixed
319989 04/28/10 08:16  Ole Hansen     adaql8 mouse
319988 04/28/10 08:05  adaq           Beam Time Accounting
319987 04/28/10 08:02  W. Deconinck   Rebooting adaql8
319989  04/28/10 08:16  Ole Hansen     adaql8 mouse
319990  04/28/10 08:16  W. Deconinck   adaql8: no graphical interface, mouse problem
319986 04/28/10 07:57  jwexler        Shift summary - Owl 4/28/2010
319985 04/28/10 07:40  apar           Start_Parity_Run_3256__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319984 04/28/10 07:38  apar           End_of_Parity_Run_3255__CODA_Config=Prex
319983 04/28/10 07:37  jwexler        Charge feedback problems
320014 04/28/10 13:26  mercado        Feedback did not work this morning
319982 04/28/10 06:49  apar           Start_Parity_Run_3255__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319981 04/28/10 06:47  apar           End_of_Parity_Run_3254__CODA_Config=Prex
319980 04/28/10 05:57  apar           Start_Parity_Run_3254__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319979 04/28/10 05:57  apar           End_of_Parity_Run_3253__CODA_Config=Prex
319978 04/28/10 05:32  jwexler        LATE ENTRY - MCC has difficulties with test.
319977 04/28/10 05:16  jwexler        Hall A tools GUI.
319976 04/28/10 05:15  jwexler        Radiation and temperature stripcharts
319975 04/28/10 05:14  jwexler        Target GUI and stripchart
319974 04/28/10 05:07  apar           Start_Parity_Run_3253__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319973 04/28/10 05:06  apar           End_of_Parity_Run_3252__CODA_Config=Prex
319972 04/28/10 05:01  apar           Start_Parity_Run_3252__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319971 04/28/10 04:47  jwexler        Changed slug number - Slug 98
319970 04/28/10 04:46  apar           Halfwave plate OUT, Slug 98
319969 04/28/10 04:42  jwexler        Target changed to thick carbon
319968 04/28/10 04:32  jwexler        MCC starting their test.
319967 04/28/10 04:31  jwexler        Target to Empty
319966 04/28/10 04:23  jwexler        Changed bcm/det pedestals in db file.
319965 04/28/10 04:08  apar           End_of_Parity_Run_3251__CODA_Config=Prex
319964 04/28/10 04:02  apar           Start_Parity_Run_3251__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/detector pedestal vs. unser calibration for IT=1535 ,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319963 04/28/10 03:59  apar           End_of_Parity_Run_3250__CODA_Config=Prex
319962 04/28/10 03:51  jwexler        Inj. IT improperly set
320015 04/28/10 13:31  mercado        IT was not set properly for Injector
320020  04/28/10 14:08  R. Michaels    re: timing board parameters
319961 04/28/10 03:50  apar           Start_Parity_Run_3250__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/detector pedestal calibration for IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319960 04/28/10 03:49  apar           End_of_Parity_Run_3249__CODA_Config=Prex
319959 04/28/10 03:45  apar           Start_Parity_Run_3249__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/detector pedestal calibration for IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319958 04/28/10 03:38  apar           Start_Parity_Run_3248__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/detector pedestal calibration for IT=1535,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319957 04/28/10 03:35  jwexler        Changed to IT = 1535
319956 04/28/10 03:08  apar           End_of_Parity_Run_3247__CODA_Config=Prex
319955 04/28/10 02:18  apar           Start_Parity_Run_3247__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=****IHWP OUT **** ****IHWP OUT ****,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319954 04/28/10 02:16  apar           End_of_Parity_Run_3246__CODA_Config=Prex
319953 04/28/10 01:46  auto_snap      Miscellaneous snapshot
319952 04/28/10 01:46  auto_snap      Hall A Tools snapshot
319951 04/28/10 01:46  auto_snap      Compton Polarimeter snapshot
319950 04/28/10 01:46  auto_snap      BigBox Magnet snapshot
319949 04/28/10 01:46  auto_snap      Beam Position and Current snapshot
319948 04/28/10 01:27  apar           Start_Parity_Run_3246__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=****IHWP OUT **** ****IHWP OUT ****,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319947 04/28/10 01:25  apar           End_of_Parity_Run_3245__CODA_Config=Prex
319946 04/28/10 00:35  apar           Start_Parity_Run_3245__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=****IHWP OUT **** ****IHWP OUT ****,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319945 04/28/10 00:34  apar           End_of_Parity_Run_3244__CODA_Config=Prex
319944 04/28/10 00:20  ZAFAR AHMED    Online GUI for Cavity Monitors
319943 04/28/10 00:16  pking          The fast excursions in INJ data also occur when beam is off.
319942 04/28/10 00:11  jwexler        Target IOC rebooted

Tuesday

319941 04/27/10 23:59  M Friend       Compton EtrocOnly runs
319940 04/27/10 23:47  Carlos         Swing shift summary
319939 04/27/10 23:45  A. Camsonne    Compton electron detector in garage position
319938 04/27/10 23:44  adaq           Beam Time Accounting
319937 04/27/10 23:44  apar           Start_Parity_Run_3244__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=****IHWP OUT **** ****IHWP OUT ****,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319936 04/27/10 23:43  apar           End_of_Parity_Run_3243__CODA_Config=Prex
319935 04/27/10 23:42  apar           Start_Parity_Run_3243__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=****IHWP OUT **** ****IHWP OUT ****,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319934 04/27/10 23:42  A. Camsonne    Electron detector Compton spectrum
319933 04/27/10 23:41  apar           End_of_Parity_Run_3242__CODA_Config=Prex
319932 04/27/10 23:38  Carlos         Vacuum evolution
319931 04/27/10 23:26  pking          Fast spikes observed in INJ data
319943  04/28/10 00:16  pking          The fast excursions in INJ data also occur when beam is off.
319930 04/27/10 22:57  Carlos         IHWP out
319929 04/27/10 22:52  jhlee          *** IHWP OUT ***
319928 04/27/10 22:52  apar           Start_Parity_Run_3242__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=****IHWP OUT **** ****IHWP OUT **** ,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319927 04/27/10 22:48  apar           Halfwave plate OUT, Slug 97
319926 04/27/10 22:45  apar           End_of_Parity_Run_3241__CODA_Config=Prex
319925 04/27/10 22:37  A. Camsonne    Compton electron detector in position 3 mm
320022  04/28/10 14:29  nanda          Electron Spectrum
319924 04/27/10 22:34  ZAFAR AHMED    Cahnge of gain of current cavities
319993  04/28/10 08:49  R. Michaels    re: how to setup and check cavities
319923 04/27/10 22:28  ZAFAR AHMED    Current cavities gain changed during run 3241
319922 04/27/10 22:23  mcanan         Target Screen Shots
319921 04/27/10 22:10  A. Camsonne    Requested to mask Compton electron detector FSD to reboot front end
319920 04/27/10 21:56  apar           Start_Parity_Run_3241__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319919 04/27/10 21:54  apar           End_of_Parity_Run_3240__CODA_Config=Prex
319918 04/27/10 21:51  M Friend       Compton FADC thresh changed
319917 04/27/10 21:48  apar           Start_Parity_Run_3240__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319916 04/27/10 21:46  apar           End_of_Parity_Run_3239__CODA_Config=Prex
319915 04/27/10 21:42  M Friend       Comptno FADC crl accum thresh changed
319918 04/27/10 21:51  M Friend       Compton FADC thresh changed
319914 04/27/10 21:35  apar           Start_Parity_Run_3239__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319913 04/27/10 21:34  apar           End_of_Parity_Run_3238__CODA_Config=Prex
319912 04/27/10 21:27  M Friend       Compton asymmetry sign flipped
319911 04/27/10 20:44  apar           Start_Parity_Run_3238__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319910 04/27/10 20:43  apar           End_of_Parity_Run_3237__CODA_Config=Prex
319909 04/27/10 20:34  M Friend       Compton asymmetry
319908 04/27/10 19:53  apar           Start_Parity_Run_3237__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319907 04/27/10 19:51  jhlee          lumi screenshots after changing HVs
319906 04/27/10 19:51  apar           End_of_Parity_Run_3236__CODA_Config=Prex
319905 04/27/10 19:48  dalton         Changed 2 lumi HV
319904 04/27/10 19:25  mcanan         vacuum pressure of the scattering chamber
319903 04/27/10 19:19  jhlee          screenshot for lumis
319907 04/27/10 19:51  jhlee          lumi screenshots after changing HVs
319902 04/27/10 19:18  jhlee          dithering screenshot
319901 04/27/10 19:15  Carlos         Chamber vacuum worse again
319900 04/27/10 19:02  apar           Start_Parity_Run_3236__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319899 04/27/10 18:57  mcanan         Target Motion
319898 04/27/10 18:52  M Friend       Compton vertical scan
319897 04/27/10 18:52  jhlee          spot++
319896 04/27/10 18:46  a-onl          End_of_Run_27529
319895 04/27/10 18:45  a-onl          Start_Run_27529,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
319894 04/27/10 18:44  a-onl          End_of_Run_27528
319893 04/27/10 18:43  M Friend       Compton rates
319892 04/27/10 18:42  a-onl          Start_Run_27528,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
319891 04/27/10 17:59  dalton         HWP is still IN, we performed a WIEN flip
319890 04/27/10 17:46  auto_snap      Temperatures snapshot
319889 04/27/10 17:46  auto_snap      Radiation and Ozone snapshot
319888 04/27/10 17:46  auto_snap      Miscellaneous snapshot
319887 04/27/10 17:46  auto_snap      Hall A Tools snapshot
319886 04/27/10 17:46  auto_snap      Compton Polarimeter snapshot
319885 04/27/10 17:46  auto_snap      BigBox Magnet snapshot
319884 04/27/10 17:46  auto_snap      Beam Position and Current snapshot
319883 04/27/10 17:24  apar           Halfwave plate IN, Slug 96
319891  04/27/10 17:59  dalton         HWP is still IN, we performed a WIEN flip
319882 04/27/10 16:50  apar           End_of_Parity_Run_3235__CODA_Config=Prex
319881 04/27/10 16:39  apar           Start_Parity_Run_3235__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam, sync monitor check,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319880 04/27/10 16:36  apar           End_of_Parity_Run_3234__CODA_Config=Prex
319879 04/27/10 16:32  A. Camsonne    GEM HV off
319878 04/27/10 16:03  Saha/jpchen    shift summary
319877 04/27/10 16:02  adaq           Beam Time Accounting
319876 04/27/10 15:55  jpchen         target vacuum and temperature charts
319875 04/27/10 15:53  jpchen         dithering off
319874 04/27/10 15:27  apar           Start_Parity_Run_3234__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam, sync monitor check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319873 04/27/10 15:02  jpchen         requested beam permit in hall
319872 04/27/10 15:00  jpchen         Target to EMPTY
319871 04/27/10 15:00  apar           End_of_Parity_Run_3233__CODA_Config=Prex
319870 04/27/10 15:00  jpchen         target ioc rebooted
319869 04/27/10 14:25  apar           Start_Parity_Run_3233__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam, sync monitor check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319868 04/27/10 14:24  apar           End_of_Parity_Run_3232__CODA_Config=Prex
319867 04/27/10 13:51  mercado        Sync Monitor Officially Working
319866 04/27/10 13:46  Kiadtisak      GEM's HV revised
319865 04/27/10 13:34  apar           Start_Parity_Run_3232__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam, sync monitor check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319863 04/27/10 13:34  A. Camsonne    GEM test done- source out - Left HRS closed
319862 04/27/10 13:33  apar           End_of_Parity_Run_3231__CODA_Config=Prex
319861 04/27/10 13:15  a-onl          End_of_Run_27526
319860 04/27/10 13:14  apar           Start_Parity_Run_3231__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam, sync monitor check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319859 04/27/10 13:11  a-onl          Start_Run_27527,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3800 UVA top 3900 V INFN bottom 4350 V INFN top 4350 V
319858 04/27/10 13:07  apar           Start_Parity_Run_3229__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam, sync monitor check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319857 04/27/10 13:06  apar           End_of_Parity_Run_3228__CODA_Config=Prex
319856 04/27/10 13:04  apar           End_of_Parity_Run_3228__CODA_Config=Prex
319855 04/27/10 12:44  apar           Start_Parity_Run_3228__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam, sync monitor check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319854 04/27/10 12:43  apar           End_of_Parity_Run_3227__CODA_Config=Prex
319853 04/27/10 12:42  a-onl          Start_Run_27526,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3800 UVA top 3900 V INFN bottom 4350 V INFN top 4350 V
319852 04/27/10 12:38  a-onl          End_of_Run_27525
319851 04/27/10 12:35  a-onl          Start_Run_27525,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3800 UVA top 3900 V INFN bottom 4350 V INFN top 4350 V
319850 04/27/10 12:35  apar           Start_Parity_Run_3227__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319849 04/27/10 12:29  a-onl          End_of_Run_27524
319848 04/27/10 12:26  a-onl          Start_Run_27524,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom Off UVA top 3900 V INFN bottom 4300 V INFN top 4300 V
319847 04/27/10 12:24  apar           End_of_Parity_Run_3226__CODA_Config=Prex
319846 04/27/10 12:21  a-onl          End_of_Run_27523
319845 04/27/10 12:16  a-onl          Start_Run_27523,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3750 V UVA top 3850 V INFN bottom 4050 V INFN top 4050 V
319844 04/27/10 12:15  a-onl          End_of_Run_27522
319843 04/27/10 12:08  a-onl          Start_Run_27522,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3700 V UVA top 3800 V INFN bottom 4250 V INFN top 4250 V
319842 04/27/10 12:07  a-onl          End_of_Run_27521
319841 04/27/10 12:01  a-onl          Start_Run_27521,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3650 V UVA top 3750 V INFN bottom 4200 V INFN top 4200 V
319840 04/27/10 12:00  Abdurahim      BCM cav Asymmetry
319839 04/27/10 11:58  a-onl          End_of_Run_27520
319838 04/27/10 11:52  a-onl          Start_Run_27520,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3600 V UVA top 3700 V INFN bottom 4150 V INFN top 4150 V
319837 04/27/10 11:50  a-onl          End_of_Run_27519
319836 04/27/10 11:45  Abdurahim      Right A_T detector abnormality
319835 04/27/10 11:43  folts          target vacuum/tech
319834 04/27/10 11:43  A. Camsonne    GEM HV changed
319833 04/27/10 11:42  a-onl          Start_Run_27519,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3550 V UVA top 3650 V INFN bottom 4100 V INFN top 4100 V
319832 04/27/10 11:40  jpchen         temerature and radiation charts
319831 04/27/10 11:39  a-onl          End_of_Run_27518
319830 04/27/10 11:34  jpchen         Controlled access activities
319829 04/27/10 11:32  a-onl          Start_Run_27518,Run_type=Other,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM Ru106 source run - UVA botttom 3550 V UVA top 3550 V INFN bottom 4100 V INFN top 4100 V
319828 04/27/10 11:31  A. Camsonne    Gem HV on
319827 04/27/10 11:29  O.Glamazdin    Moller magnet has been filled
319826 04/27/10 11:26  A. Camsonne    GEM source test - No one allowed in the Left HRS without radcon approval
319825 04/27/10 11:06  apar           Start_Parity_Run_3226__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=perdestral run, no beam,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319824 04/27/10 10:43  jpchen         Septum off for controlled access
319823 04/27/10 10:10  jpchen         scattering chamber vacuum stable at 1.5*10-5
319822 04/27/10 10:00  silwal         Oversample data from the qweak adcs on the injector bcm
319821 04/27/10 09:49  jpchen         scattering chamber vacuum alarm
319823  04/27/10 10:10  jpchen         scattering chamber vacuum stable at 1.5*10-5
319820 04/27/10 09:46  auto_snap      Temperatures snapshot
319819 04/27/10 09:46  auto_snap      Radiation and Ozone snapshot
319818 04/27/10 09:45  auto_snap      Miscellaneous snapshot
319817 04/27/10 09:45  auto_snap      Hall A Tools snapshot
319816 04/27/10 09:45  auto_snap      Compton Polarimeter snapshot
319815 04/27/10 09:45  auto_snap      BigBox Magnet snapshot
319814 04/27/10 09:45  auto_snap      Beam Position and Current snapshot
319813 04/27/10 09:41  ZAFAR AHMED    Cavities gain min and max test(2)
319812 04/27/10 09:12  a-onl          End_of_Run_6756
319811 04/27/10 09:09  a-onl          Start_Run_6756,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
319810 04/27/10 09:08  a-onl          End_of_Run_6755
319809 04/27/10 09:05  a-onl          Start_Run_6755,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
319808 04/27/10 09:05  a-onl          End_of_Run_6754
319807 04/27/10 09:04  a-onl          Start_Run_6754,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
319806 04/27/10 09:02  a-onl          End_of_Run_6753
319805 04/27/10 09:01  apar           End_of_Parity_Run_3225__CODA_Config=Prex
319804 04/27/10 08:55  a-onl          Start_Run_6753,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
319803 04/27/10 08:51  apar           Start_Parity_Run_3225__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319802 04/27/10 08:50  apar           End_of_Parity_Run_3224__CODA_Config=Prex
319801 04/27/10 08:50  ZAFAR AHMED    Cavities at min and max gains.
319813  04/27/10 09:41  ZAFAR AHMED    Cavities gain min and max test(2)
319800 04/27/10 08:02  adaq           Beam Time Accounting
319799 04/27/10 08:01  jwexler        Shift summary, 04/27/10
319798 04/27/10 08:00  apar           Start_Parity_Run_3224__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319797 04/27/10 07:58  apar           End_of_Parity_Run_3223__CODA_Config=Prex
319796 04/27/10 07:58  a-onl          End_of_Run_6752
319795 04/27/10 07:56  a-onl          Start_Run_6752,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
319794 04/27/10 07:56  a-onl          End_of_Run_6751
319793 04/27/10 07:55  a-onl          Start_Run_6751,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
319792 04/27/10 07:52  a-onl          End_of_Run_6750
319791 04/27/10 07:49  jwexler        Compton HV trip
319790 04/27/10 07:49  a-onl          Start_Run_6750,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
319789 04/27/10 07:38  jwexler        Prompt & PANGUIN misreading beam current
319788 04/27/10 07:09  apar           Start_Parity_Run_3223__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319787 04/27/10 07:07  apar           End_of_Parity_Run_3222__CODA_Config=Prex
319786 04/27/10 06:17  apar           Start_Parity_Run_3222__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319785 04/27/10 06:16  apar           End_of_Parity_Run_3221__CODA_Config=Prex
319784 04/27/10 05:59  jwexler        Compton HV trip
319783 04/27/10 05:26  apar           Start_Parity_Run_3221__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319782 04/27/10 05:23  jwexler        ROC23 reset.
319781 04/27/10 05:19  apar           End_of_Parity_Run_3220__CODA_Config=Prex
319780 04/27/10 05:18  apar           Start_Parity_Run_3220__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319779 04/27/10 05:16  apar           End_of_Parity_Run_3219__CODA_Config=Prex
319778 04/27/10 04:37  jwexler        Rad. and temp. strip charts
319777 04/27/10 04:35  jwexler        Target GUI and stripchart
319776 04/27/10 04:32  jwexler        Hall A tools
319775 04/27/10 04:29  jwexler        Detectors and lumis saturated.
319774 04/27/10 04:27  apar           Start_Parity_Run_3219__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319773 04/27/10 04:25  apar           End_of_Parity_Run_3218__CODA_Config=Prex
319772 04/27/10 04:13  apar           Start_Parity_Run_3218__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=det HV calib.,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319771 04/27/10 04:11  apar           End_of_Parity_Run_3217__CODA_Config=Prex
319770 04/27/10 03:49  apar           Start_Parity_Run_3217__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=in production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319769 04/27/10 03:46  apar           End_of_Parity_Run_3216__CODA_Config=Prex
319768 04/27/10 03:30  jwexler        Asymmetries for different ramp delay settings.
319767 04/27/10 03:01  jwexler        Changed bcm and det. pedestals in db file.
319766 04/27/10 02:56  apar           Start_Parity_Run_3216__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=in production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319765 04/27/10 02:53  apar           End_of_Parity_Run_3215__CODA_Config=Prex
319764 04/27/10 02:43  apar           Start_Parity_Run_3215__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 200, ramp delay = 0,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319763 04/27/10 02:42  apar           End_of_Parity_Run_3214__CODA_Config=Prex
319762 04/27/10 02:33  apar           Start_Parity_Run_3214__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 200, ramp delay = 0,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319761 04/27/10 02:32  apar           End_of_Parity_Run_3213__CODA_Config=Prex
319760 04/27/10 02:24  apar           Start_Parity_Run_3213__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 200, ramp delay = 0,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319759 04/27/10 02:22  apar           Start_Parity_Run_3212__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 200, ramp delay = 0,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319758 04/27/10 02:19  apar           End_of_Parity_Run_3211__CODA_Config=Prex
319757 04/27/10 02:18  apar           Start_Parity_Run_3211__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 200, ramp delay = 120,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319756 04/27/10 02:11  apar           End_of_Parity_Run_3210__CODA_Config=Prex
319755 04/27/10 01:59  apar           Start_Parity_Run_3210__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87, ramp delay = 120,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319754 04/27/10 01:58  paschke        RHWP 2900 for large charge asymmetry, run 3210
319753 04/27/10 01:57  apar           End_of_Parity_Run_3209__CODA_Config=Prex
319752 04/27/10 01:54  dalton         Oversample charge asymmetry measurement
320093  04/28/10 23:57  paschke        retry log entry: oversampling and "pinhole" scan in integration window
320094  04/28/10 23:57  paschke        retry log entry: oversampling and "pinhole" scan in integration window
319751 04/27/10 01:45  auto_snap      Temperatures snapshot
319750 04/27/10 01:45  auto_snap      Radiation and Ozone snapshot
319749 04/27/10 01:45  auto_snap      Miscellaneous snapshot
319748 04/27/10 01:45  auto_snap      Hall A Tools snapshot
319747 04/27/10 01:45  auto_snap      Compton Polarimeter snapshot
319746 04/27/10 01:45  auto_snap      BigBox Magnet snapshot
319744 04/27/10 01:45  auto_snap      Beam Position and Current snapshot
319743 04/27/10 01:38  apar           Start_Parity_Run_3209__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87, ramp delay = 120,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319742 04/27/10 01:36  apar           End_of_Parity_Run_3208__CODA_Config=Prex
319741 04/27/10 01:15  apar           Start_Parity_Run_3208__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87, ramp delay = 1400,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319740 04/27/10 01:12  apar           End_of_Parity_Run_3207__CODA_Config=Prex
319739 04/27/10 01:09  apar           Start_Parity_Run_3207__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87, ramp delay = 1400,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319738 04/27/10 01:09  apar           Start_Parity_Run_3206__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87, ramp delay = 1400,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319737 04/27/10 01:07  jwexler        Compton HV trip
319736 04/27/10 00:59  apar           End_of_Parity_Run_3205__CODA_Config=Prex
319735 04/27/10 00:54  apar           Start_Parity_Run_3205__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87, ramp delay = 1400,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319734 04/27/10 00:52  apar           End_of_Parity_Run_3204__CODA_Config=Prex
319733 04/27/10 00:33  apar           Start_Parity_Run_3204__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87, ramp delay = 120,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319732 04/27/10 00:30  apar           End_of_Parity_Run_3203__CODA_Config=Prex
319731 04/27/10 00:26  mercado        Pedestal change to database for cavities
319730 04/27/10 00:03  ZAFAR AHMED    Cavities signal is good in RHRS but not in Parity DAQ.
319729 04/27/10 00:01  adaq           Beam Time Accounting
319728 04/27/10 00:00  A. Deur        04/26/2010 Swing Shift summary

Monday

319727 04/26/10 23:48  apar           Start_Parity_Run_3203__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87 (defined in Timeboard of greenmonstor,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319726 04/26/10 23:46  apar           End_of_Parity_Run_3202__CODA_Config=Prex
319725 04/26/10 23:45  apar           Start_Parity_Run_3202__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87 (defined in Timeboard of greenmonstor,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319724 04/26/10 23:44  apar           End_of_Parity_Run_3201__CODA_Config=Prex
319723 04/26/10 23:42  apar           Start_Parity_Run_3201__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87 (defined in Timeboard of greenmonstor,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319722 04/26/10 23:40  apar           End_of_Parity_Run_3200__CODA_Config=Prex
319721 04/26/10 23:36  apar           Start_Parity_Run_3200__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87 (defined in Timeboard of greenmonstor,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319720 04/26/10 23:34  apar           End_of_Parity_Run_3199__CODA_Config=Prex
319719 04/26/10 23:30  apar           Start_Parity_Run_3199__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 0, Intergrate Time 87 (defined in Timeboard of greenmonstor,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319718 04/26/10 23:27  apar           End_of_Parity_Run_3198__CODA_Config=Prex
319717 04/26/10 23:26  apar           Start_Parity_Run_3198__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 1, short gate,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319716 04/26/10 23:24  apar           End_of_Parity_Run_3197__CODA_Config=Prex
319715 04/26/10 23:24  apar           Start_Parity_Run_3197__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 1, short gate ,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319714 04/26/10 23:23  apar           End_of_Parity_Run_3196__CODA_Config=Prex
319713 04/26/10 23:22  apar           Start_Parity_Run_3196__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319712 04/26/10 23:21  apar           End_of_Parity_Run_3195__CODA_Config=Prex
319711 04/26/10 23:09  apar           Start_Parity_Run_3195__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319710 04/26/10 22:52  apar           Start_Parity_Run_3194__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319709 04/26/10 22:48  apar           End_of_Parity_Run_3192__CODA_Config=Prex
319708 04/26/10 22:39  Abdurahim      Compton S/B ratio is 0.07
319707 04/26/10 22:35  apar           Start_Parity_Run_3192__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319706 04/26/10 22:31  apar           End_of_Parity_Run_3191__CODA_Config=Prex
319705 04/26/10 22:27  a-onl          End_of_Run_6749
319704 04/26/10 22:25  a-onl          Start_Run_6749,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.7
319703 04/26/10 22:18  apar           Start_Parity_Run_3191__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319702 04/26/10 22:17  apar           End_of_Parity_Run_3190__CODA_Config=Prex
319701 04/26/10 22:16  benesch        beam should likely be higher  or tilted down in Compton
319700 04/26/10 22:05  apar           Start_Parity_Run_3190__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319699 04/26/10 22:03  apar           End_of_Parity_Run_3189__CODA_Config=Prex
319698 04/26/10 21:51  apar           Start_Parity_Run_3189__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319697 04/26/10 21:49  apar           End_of_Parity_Run_3188__CODA_Config=Prex
319696 04/26/10 21:43  paschke        createDB not always picking up on oversample setting
319695 04/26/10 21:40  a-onl          End_of_Run_6748
319694 04/26/10 21:37  apar           Start_Parity_Run_3188__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319693 04/26/10 21:37  a-onl          Start_Run_6748,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.7
319692 04/26/10 21:35  apar           End_of_Parity_Run_3187__CODA_Config=Prex
319691 04/26/10 21:34  apar           Start_Parity_Run_3187__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319690 04/26/10 21:33  apar           End_of_Parity_Run_3186__CODA_Config=Prex
319689 04/26/10 21:23  apar           Start_Parity_Run_3186__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling 4, current ramp,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319688 04/26/10 21:11  apar           End_of_Parity_Run_3185__CODA_Config=Prex
319687 04/26/10 21:11  apar           Start_Parity_Run_3185__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling = 4,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319686 04/26/10 21:02  benesch        S/N = 0.07 for Compton 
319701  04/26/10 22:16  benesch        beam should likely be higher  or tilted down in Compton
319685 04/26/10 20:55  apar           End_of_Parity_Run_3184__CODA_Config=Prex
319684 04/26/10 20:54  apar           Start_Parity_Run_3184__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling = 4,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319683 04/26/10 20:52  apar           End_of_Parity_Run_3183__CODA_Config=Prex
319682 04/26/10 20:51  apar           Start_Parity_Run_3183__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling = 4,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319681 04/26/10 20:49  apar           Start_Parity_Run_3182__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling = 4,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319680 04/26/10 20:49  apar           End_of_Parity_Run_3182__CODA_Config=Prex
319679 04/26/10 20:47  jhlee          oversampling number is wrong
319678 04/26/10 20:46  apar           Start_Parity_Run_3181__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling = 6,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319677 04/26/10 20:46  apar           End_of_Parity_Run_3181__CODA_Config=Prex
319676 04/26/10 20:42  apar           End_of_Parity_Run_3180__CODA_Config=Prex
319675 04/26/10 20:41  apar           Start_Parity_Run_3180__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling = 8,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319679  04/26/10 20:47  jhlee          oversampling number is wrong
319674 04/26/10 20:36  apar           End_of_Parity_Run_3179__CODA_Config=Prex
319673 04/26/10 20:36  apar           Start_Parity_Run_3179__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling = 8,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319672 04/26/10 20:21  R. Michaels    re: bad cavities
319730  04/27/10 00:03  ZAFAR AHMED    Cavities signal is good in RHRS but not in Parity DAQ.
319671 04/26/10 20:04  apar           End_of_Parity_Run_3178__CODA_Config=Prex
319670 04/26/10 20:03  apar           Start_Parity_Run_3178__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=oversampling = 8,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319669 04/26/10 19:58  apar           End_of_Parity_Run_3177__CODA_Config=Prex
319668 04/26/10 19:37  jhlee          prompt dosen't go 
319667 04/26/10 19:35  Abdurahim      Compton Cavity has been restored
319686  04/26/10 21:02  benesch        S/N = 0.07 for Compton 
319708  04/26/10 22:39  Abdurahim      Compton S/B ratio is 0.07
319666 04/26/10 19:08  apar           Start_Parity_Run_3177__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319665 04/26/10 19:06  apar           End_of_Parity_Run_3176__CODA_Config=Prex
319664 04/26/10 18:16  apar           Start_Parity_Run_3176__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319663 04/26/10 18:15  apar           End_of_Parity_Run_3175__CODA_Config=Prex
319662 04/26/10 18:09  jhlee          bcmcav3 strange signal
319661 04/26/10 17:45  auto_snap      Temperatures snapshot
319660 04/26/10 17:45  auto_snap      Radiation and Ozone snapshot
319659 04/26/10 17:45  auto_snap      Miscellaneous snapshot
319658 04/26/10 17:45  auto_snap      Hall A Tools snapshot
319657 04/26/10 17:45  auto_snap      Compton Polarimeter snapshot
319656 04/26/10 17:44  auto_snap      BigBox Magnet snapshot
319655 04/26/10 17:44  auto_snap      Beam Position and Current snapshot
319654 04/26/10 17:28  jhlee          CODA crashed, restarted it 
319653 04/26/10 17:25  apar           Start_Parity_Run_3175__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319652 04/26/10 17:23  jpchen         Target alarms should be ok now
319651 04/26/10 17:21  apar           End_of_Parity_Run_3173__CODA_Config=Prex
319650 04/26/10 17:13  jhlee          lumi 3
319649 04/26/10 17:11  ITARD          Target Screens
319648 04/26/10 16:50  A. Deur        Hall A tools
319647 04/26/10 16:45  mercado        Bad Cavity Signals Again
319672  04/26/10 20:21  R. Michaels    re: bad cavities
319646 04/26/10 16:42  jhlee          Dithering Screenshot
319645 04/26/10 16:32  apar           Start_Parity_Run_3173__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319644 04/26/10 16:18  O.Glamazdin    Moller magnet has been refilled
319643 04/26/10 16:02  adaq           Beam Time Accounting
319642 04/26/10 15:44  W. Deconinck   Beam off for Moller refill
319641 04/26/10 15:34  apar           End_of_Parity_Run_3172__CODA_Config=Prex
319640 04/26/10 15:32  W. Deconinck   Called MCC for escorted access
319639 04/26/10 15:19  W. Deconinck   Target tools screen capture
319638 04/26/10 15:15  W. Deconinck   Compton photon detector trip
319637 04/26/10 15:00  Abdurahim      Double peak in BPM4bx
319636 04/26/10 14:53  W. Deconinck   Compton photon detector trip
319635 04/26/10 14:49  hisham         IHWP is IN
319634 04/26/10 14:49  Abdurahim      BCM cav Asym plots ?
319633 04/26/10 14:48  W. Deconinck   Good production run list for thick carbon
319632 04/26/10 14:45  apar           Start_Parity_Run_3172__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319631 04/26/10 14:43  apar           Halfwave plate IN, Slug 95
319630 04/26/10 14:42  apar           End_of_Parity_Run_3171__CODA_Config=Prex
319629 04/26/10 14:20  apar           Start_Parity_Run_3171__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319628 04/26/10 14:18  apar           End_of_Parity_Run_3170__CODA_Config=Prex
319627 04/26/10 14:16  Abdurahim      Srange BCM  cav asymmetry
319626 04/26/10 13:49  dalton         Reprompting slug 13
319625 04/26/10 13:41  dalton         Changes to BCM datamap
319624 04/26/10 13:28  apar           Start_Parity_Run_3170__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319623 04/26/10 13:27  apar           End_of_Parity_Run_3169__CODA_Config=Prex
319622 04/26/10 12:59  mercado        Added Injector BCM and changed raster pickoff currents
319621 04/26/10 12:59  Abdurahim      Strange looking BCM cavity asymmetry
319620 04/26/10 12:49  mercado        Full BCM Datamap
319619 04/26/10 12:37  apar           Start_Parity_Run_3169__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319618 04/26/10 12:35  apar           End_of_Parity_Run_3168__CODA_Config=Prex
319617 04/26/10 12:33  mercado        Full BCM Datamap
319620  04/26/10 12:49  mercado        Full BCM Datamap
319616 04/26/10 12:07  jpchen         target false alarm
319652 04/26/10 17:23  jpchen         Target alarms should be ok now
319615 04/26/10 11:59  Abdurahim      Strange BPM asymmetry
319614 04/26/10 11:57  Abdurahim      Large BCM asymmetry, bcm cavity monitor calibration error ??
319613 04/26/10 11:46  apar           Start_Parity_Run_3168__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319612 04/26/10 11:44  apar           End_of_Parity_Run_3167__CODA_Config=Prex
319611 04/26/10 11:22  M Friend       Compton EPICS readback changed
319610 04/26/10 10:54  apar           Start_Parity_Run_3167__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319609 04/26/10 10:53  apar           End_of_Parity_Run_3166__CODA_Config=Prex
319608 04/26/10 10:40  W. Deconinck   Photon detector HV trip
319607 04/26/10 10:03  apar           Start_Parity_Run_3166__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319606 04/26/10 10:01  apar           End_of_Parity_Run_3165__CODA_Config=Prex
319605 04/26/10 09:54  riordan        autosnaps restarted
319604 04/26/10 09:44  auto_snap      Temperatures snapshot
319603 04/26/10 09:44  auto_snap      Radiation and Ozone snapshot
319602 04/26/10 09:44  auto_snap      Miscellaneous snapshot
319601 04/26/10 09:44  auto_snap      Hall A Tools snapshot
319600 04/26/10 09:44  auto_snap      Compton Polarimeter snapshot
319599 04/26/10 09:44  auto_snap      BigBox Magnet snapshot
319598 04/26/10 09:44  auto_snap      Beam Position and Current snapshot
319597 04/26/10 09:15  W. Deconinck   Compton DAQ started again after cavity fixed
319596 04/26/10 09:11  apar           Start_Parity_Run_3165__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319595 04/26/10 09:10  apar           End_of_Parity_Run_3164__CODA_Config=Prex
319594 04/26/10 09:02  W. Deconinck   Runbird now warns if not on adaql5
319593 04/26/10 08:47  W. Deconinck   runbird should be started on adaql5
319592 04/26/10 08:40  hisham         Feedback monitor
319593  04/26/10 08:47  W. Deconinck   runbird should be started on adaql5
319591 04/26/10 08:20  apar           Start_Parity_Run_3164__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319590 04/26/10 08:17  apar           End_of_Parity_Run_3163__CODA_Config=Prex
319589 04/26/10 08:16  hisham         Dithering
319588 04/26/10 08:13  Mindy          Hall-A general tool
319587 04/26/10 08:10  apar           Start_Parity_Run_3163__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319586 04/26/10 08:08  apar           End_of_Parity_Run_3162__CODA_Config=Prex
319585 04/26/10 08:07  paschke        feedback on bcm1, curmon on bcm3... changed low beam, but need to normalize this
319584 04/26/10 08:06  jwexler        Shift Summary - Owl 04/26/2010
319583 04/26/10 08:05  W. Deconinck   Compton laser cavity lock lost
319582 04/26/10 08:05  adaq           Beam Time Accounting
319581 04/26/10 07:56  paschke        charge feedback not working
319585  04/26/10 08:07  paschke        feedback on bcm1, curmon on bcm3... changed low beam, but need to normalize this
319580 04/26/10 07:41  apar           Start_Parity_Run_3162__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319579 04/26/10 07:39  apar           End_of_Parity_Run_3161__CODA_Config=Prex
319578 04/26/10 06:50  apar           Start_Parity_Run_3161__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319577 04/26/10 06:48  jwexler        IHWP now OUT, slug 16.
319576 04/26/10 06:46  apar           Halfwave plate OUT, Slug 16
319575 04/26/10 06:39  apar           End_of_Parity_Run_3160__CODA_Config=Prex
319574 04/26/10 06:10  apar           Start_Parity_Run_3160__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319573 04/26/10 06:09  apar           End_of_Parity_Run_3159__CODA_Config=Prex
319572 04/26/10 06:05  jwexler        Compton trip
319571 04/26/10 05:20  jwexler        Compton trip
319570 04/26/10 05:19  apar           Start_Parity_Run_3159__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319569 04/26/10 05:17  apar           End_of_Parity_Run_3158__CODA_Config=Prex
319568 04/26/10 05:02  jwexler        Hall A Tools screengrab
319567 04/26/10 05:02  jwexler        Radiation and temperature stripcharts
319566 04/26/10 05:01  jwexler        Target GUI and stripchart
319565 04/26/10 04:28  apar           Start_Parity_Run_3158__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319564 04/26/10 04:26  apar           End_of_Parity_Run_3157__CODA_Config=Prex
319563 04/26/10 03:37  apar           Start_Parity_Run_3157__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Productuion,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319562 04/26/10 03:35  apar           End_of_Parity_Run_3156__CODA_Config=Prex
319561 04/26/10 03:10  jwexler        Possible dithering-panguin issue
319560 04/26/10 02:47  jwexler        Dithering issue
319561  04/26/10 03:10  jwexler        Possible dithering-panguin issue
319559 04/26/10 02:45  apar           Start_Parity_Run_3156__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Productuion,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319558 04/26/10 02:41  apar           End_of_Parity_Run_3155__CODA_Config=Prex
319557 04/26/10 02:35  jwexler        Hall A tools
319556 04/26/10 02:26  jwexler        Target GUI and strip chart
319555 04/26/10 02:22  jwexler        Radiation and temperature stripcharts
319554 04/26/10 02:21  jwexler        No longer in large charge asymmetry settings
319553 04/26/10 02:21  apar           Start_Parity_Run_3155__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Prodectuion,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319552 04/26/10 02:19  apar           End_of_Parity_Run_3154__CODA_Config=Prex
319551 04/26/10 02:18  jwexler        BCM pedestal calibration from large charge asymmetry runs.
319550 04/26/10 02:08  apar           Start_Parity_Run_3154__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test RHWP at 2900 ,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319549 04/26/10 02:05  apar           End_of_Parity_Run_3153__CODA_Config=Prex
319548 04/26/10 01:57  apar           Start_Parity_Run_3153__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test RHWP at 2900 - Beam Ramps,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319547 04/26/10 01:56  apar           End_of_Parity_Run_3152__CODA_Config=Prex
319546 04/26/10 01:54  Apar           test
319545 04/26/10 01:37  apar           Start_Parity_Run_3152__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test RHWP at 2900,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319544 04/26/10 01:35  apar           End_of_Parity_Run_3151__CODA_Config=Prex
319543 04/26/10 01:31  mercado        Zero beam pedestals for 120Hz
319542 04/26/10 01:31  apar           Start_Parity_Run_3151__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test RHWP at 2900,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319541 04/26/10 01:30  jwexler        Large charge asymmetry run
319540 04/26/10 01:28  jwexler        Changed rotating waveplate
319539 04/26/10 01:26  apar           End_of_Parity_Run_3150__CODA_Config=Prex
319538 04/26/10 01:25  Apar           Change pedestals for 240Hz
319543 04/26/10 01:31  mercado        Zero beam pedestals for 240Hz
319537 04/26/10 01:23  apar           Start_Parity_Run_3150__CODA_Config=Prex_Run_type=Production,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production 0uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319536 04/26/10 01:21  apar           End_of_Parity_Run_3149__CODA_Config=Prex
319535 04/26/10 01:16  silwal         prompt working fine now
319534 04/26/10 01:12  apar           Start_Parity_Run_3149__CODA_Config=Prex_Run_type=Production,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production 0uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319533 04/26/10 01:10  apar           End_of_Parity_Run_3148__CODA_Config=Prex
319532 04/26/10 01:05  apar           Start_Parity_Run_3148__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319531 04/26/10 01:04  apar           End_of_Parity_Run_3147__CODA_Config=Prex
319530 04/26/10 01:00  mercado        BCM added to datamap
319529 04/26/10 00:52  apar           Start_Parity_Run_3147__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319528 04/26/10 00:50  R. Michaels    adjust blumi3 HV.
319527 04/26/10 00:50  apar           End_of_Parity_Run_3146__CODA_Config=Prex
319526 04/26/10 00:47  apar           Start_Parity_Run_3146__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319525 04/26/10 00:40  R. Michaels    further mods to DAQ for C12
319524 04/26/10 00:40  apar           End_of_Parity_Run_3144__CODA_Config=Prex
319523 04/26/10 00:36  apar           Start_Parity_Run_3144__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319522 04/26/10 00:32  jwexler        Compton HV trip
319521 04/26/10 00:25  jwexler        Slug number incremented to 15 for thick carbon production
319520 04/26/10 00:21  apar           Halfwave plate IN, Slug 15
319519 04/26/10 00:20  apar           End_of_Parity_Run_3143__CODA_Config=Prex
319518 04/26/10 00:17  apar           Start_Parity_Run_3143__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319517 04/26/10 00:13  R. Michaels    Switch to thick C12
319525 04/26/10 00:40  R. Michaels    further mods to DAQ for C12
319516 04/26/10 00:10  apar           End_of_Parity_Run_3141__CODA_Config=Prex
319515 04/26/10 00:07  jwexler        Target alarm screen
319514 04/26/10 00:03  LeRose         Shift Summary
319513 04/26/10 00:02  jwexler        False gas panel target alarm returned.
319616 04/26/10 12:07  jpchen         target false alarm
319512 04/26/10 00:01  adaq           Beam Time Accounting

Sunday

319511 04/25/10 23:59  jwexler        Target IOC crash.
319510 04/25/10 23:59  apar           Start_Parity_Run_3141__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319509 04/25/10 23:54  jwexler        Target changed - thick carbon
319508 04/25/10 23:46  apar           End_of_Parity_Run_3140__CODA_Config=Prex
319507 04/25/10 23:42  apar           Start_Parity_Run_3140__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319506 04/25/10 23:40  apar           End_of_Parity_Run_3139__CODA_Config=Prex
319505 04/25/10 22:51  apar           Start_Parity_Run_3139__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319504 04/25/10 22:49  apar           End_of_Parity_Run_3138__CODA_Config=Prex
319503 04/25/10 22:29  jhlee          Target Strip Chart
319502 04/25/10 22:24  Abdurahim      Compton
319501 04/25/10 22:11  M Friend       Compton crl thresholds changed
319500 04/25/10 21:59  apar           Start_Parity_Run_3138__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319499 04/25/10 21:58  apar           End_of_Parity_Run_3137__CODA_Config=Prex
319498 04/25/10 21:22  LeRose         Radmon & Temps
319497 04/25/10 21:09  apar           End_of_Parity_Run_3136__CODA_Config=Prex
319496 04/25/10 21:08  apar           Start_Parity_Run_3137__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319495 04/25/10 21:00  jhlee          prompt *** Break *** segmentation violation
319494 04/25/10 20:36  Jack           VDC HV control
319493 04/25/10 20:26  jhlee          dithering screenshot of PANGUIN
319492 04/25/10 20:17  apar           Start_Parity_Run_3136__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319491 04/25/10 20:15  apar           End_of_Parity_Run_3135__CODA_Config=Prex
319490 04/25/10 19:58  ZAFAR AHMED    Target Chart
319489 04/25/10 19:52  R. Michaels    re: recovering VDCs (late entry)
319494  04/25/10 20:36  Jack           VDC HV control
319488 04/25/10 19:25  LeRose         Temp & Radmon
319487 04/25/10 19:25  apar           Start_Parity_Run_3135__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=dithering is on after event 16000 roughly,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319486 04/25/10 19:21  apar           Halfwave plate IN, Slug 14
319485 04/25/10 19:19  apar           End_of_Parity_Run_3134__CODA_Config=Prex
319484 04/25/10 19:17  ZAFAR AHMED    Vacuum Pressure No alaram
319483 04/25/10 19:06  apar           Start_Parity_Run_3134__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319482 04/25/10 19:03  apar           End_of_Parity_Run_3133__CODA_Config=Prex
319481 04/25/10 18:56  mercado        DAQ sync signals at 240Hz
319480 04/25/10 18:55  ZAFAR AHMED    Beam Recovery Raster at 5 uA. Lead Diamond 3
319479 04/25/10 18:51  apar           Start_Parity_Run_3133__CODA_Config=Prex_Run_type=Production,beam_current=5,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319478 04/25/10 18:50  a-onl          End_of_Run_27516
319477 04/25/10 18:49  a-onl          Start_Run_27516,Run_type=Other,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
319476 04/25/10 18:49  apar           End_of_Parity_Run_3132__CODA_Config=Prex
319475 04/25/10 18:48  a-onl          End_of_Run_27510
319474 04/25/10 18:45  ZAFAR AHMED    Beam Recovery Spot size Lead Diamond
319473 04/25/10 18:42  a-onl          End_of_Run_27515
319472 04/25/10 18:41  a-onl          Start_Run_27515,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.02,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
319471 04/25/10 18:40  ZAFAR AHMED    Beam Recovery - Lead Diamond # 3 Rates
319470 04/25/10 18:36  ZAFAR AHMED    Target is Lead Diamon # 3
319469 04/25/10 18:34  ZAFAR AHMED    Slit is 12.7 and Attn. is 65
319468 04/25/10 18:33  ZAFAR AHMED    Beam Recovery - Left Upper Scint Rates at 5 nA
319467 04/25/10 18:21  ZAFAR AHMED    Beam Recovery - Target is BeO
319466 04/25/10 18:16  ZAFAR AHMED    Beam Recovery - Spot size empty target
319465 04/25/10 18:14  a-onl          End_of_Run_27514
319464 04/25/10 18:13  a-onl          Start_Run_27514,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
319463 04/25/10 18:13  ZAFAR AHMED    Beam current and position
319462 04/25/10 18:11  a-onl          End_of_Run_27513
319461 04/25/10 18:05  apar           Start_Parity_Run_3132__CODA_Config=Prex_Run_type=Pedestal,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=empty target; test sync check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
319460 04/25/10 18:04  apar           End_of_Parity_Run_3131__CODA_Config=Prex
319459 04/25/10 18:04  apar           Start_Parity_Run_3131__CODA_Config=Prex_Run_type=Pedestal,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=empty target; test sync check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
319458 04/25/10 18:01  apar           End_of_Parity_Run_3130__CODA_Config=Prex
319457 04/25/10 17:59  LeRose         Septum Magnet Restored
319456 04/25/10 17:57  apar           Start_Parity_Run_3130__CODA_Config=Prex_Run_type=Pedestal,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=empty target; test sync check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
319455 04/25/10 17:51  Kiadtisak      GEM ADC's Plots
319454 04/25/10 17:46  apar           End_of_Parity_Run_3129__CODA_Config=Prex
319452 04/25/10 17:34  O.Glamazdin    Moller magnet has been filled
319447 04/25/10 17:29  LeRose         Hall A Tools
319444 04/25/10 16:56  apar           Start_Parity_Run_3129__CODA_Config=Prex_Run_type=Pedestal,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=empty target; test sync check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
319443 04/25/10 16:40  A. Camsonne    Gem HV off
319442 04/25/10 16:33  mcnulty        Moved to empty target. VDC HVs off and quartz HV set for integrating mode
319441 04/25/10 16:33  R. Michaels    empty target
319440 04/25/10 16:27  a-onl          End_of_Run_6747
319439 04/25/10 16:19  a-onl          End_of_Run_6747
319438 04/25/10 16:18  R. Michaels    more thin Pb runs
319437 04/25/10 16:17  a-onl          Start_Run_27513,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.7
319436 04/25/10 16:17  a-onl          Start_Run_6747,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.7
319435 04/25/10 16:17  a-onl          End_of_Run_27512
319434 04/25/10 16:06  R. Michaels    thin lead target running
319433 04/25/10 16:04  a-onl          Start_Run_6746,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.7
319432 04/25/10 16:03  a-onl          Start_Run_27512,Run_type=Qsq,target_type=Thin Pb,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.7
319431 04/25/10 16:03  A. Camsonne    GEM HV increased
319430 04/25/10 16:02  mcnulty        online Q2 for Pb#3 at 0.2kHz T5 rate
319429 04/25/10 16:01  adaq           Beam Time Accounting
319428 04/25/10 15:55  a-onl          End_of_Run_6745
319427 04/25/10 15:55  a-onl          End_of_Run_27511
319426 04/25/10 15:55  Mindy          04/25/2010 Day Shift Summary
319425 04/25/10 15:52  R. Michaels    Qsq runs on lead/diamond.  Rate scan.
319424 04/25/10 15:51  mcnulty        online Q2 for Pb#3 at 3kHz T5 rate
319423 04/25/10 15:44  a-onl          Start_Run_27511,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.2
319422 04/25/10 15:44  a-onl          Start_Run_6745,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.2
319421 04/25/10 15:43  a-onl          End_of_Run_6744
319420 04/25/10 15:43  a-onl          End_of_Run_27505
319419 04/25/10 15:43  a-onl          Start_Run_6744,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.5
319418 04/25/10 15:43  a-onl          Start_Run_27510,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.5
319417 04/25/10 15:41  mcnulty        online Q2 for Pb#3 at 9.3kHz T5 rate
319416 04/25/10 15:40  a-onl          End_of_Run_27509
319415 04/25/10 15:40  a-onl          End_of_Run_6743
319414 04/25/10 15:37  mcnulty        online Q2 for Pb#3 at 57kHz T5 rate
319413 04/25/10 15:35  a-onl          Start_Run_6743,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.5
319412 04/25/10 15:35  a-onl          Start_Run_27509,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.5
319411 04/25/10 15:34  a-onl          End_of_Run_6742
319410 04/25/10 15:34  a-onl          End_of_Run_27508
319409 04/25/10 15:31  mcnulty        online Q2 for Pb#3 at 125kHz T5 rate
319408 04/25/10 15:29  A. Camsonne    GEM HV changed
319407 04/25/10 15:29  a-onl          Start_Run_27508,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=12.7
319405 04/25/10 15:26  a-onl          End_of_Run_27507
319404 04/25/10 15:26  a-onl          End_of_Run_6741
319403 04/25/10 15:26  mcnulty        online Q2 for thin Carbon, raster on
319402 04/25/10 15:19  a-onl          Start_Run_6741,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=13
319401 04/25/10 15:19  a-onl          Start_Run_27507,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=slit=13
319400 04/25/10 15:19  mcnulty        Rarm spectra for thin Carbon with raster
319399 04/25/10 15:17  a-onl          End_of_Run_6740
319397 04/25/10 15:16  mcnulty        Larm spectra (thin Carbon) with raster on
319396 04/25/10 15:14  a-onl          Start_Run_6740,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
319395 04/25/10 15:14  a-onl          Start_Run_27506,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
319394 04/25/10 15:11  mcnulty        Larm spectra from thin Carbon  (no raster)
319393 04/25/10 15:08  mcnulty        Rarm Carbon spectra (no raster)
319392 04/25/10 15:03  a-onl          End_of_Run_6739
319391 04/25/10 15:03  R. Michaels    spot++
319390 04/25/10 15:01  A. Camsonne    GEM current HV settings
319389 04/25/10 15:01  a-onl          Start_Run_6739,Run_type=Spot++,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
319388 04/25/10 15:00  a-onl          Start_Run_27505,Run_type=Spot++,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Q2 meas on thin C
319387 04/25/10 14:59  mcnulty        online Q2 for (9mg) Carbon Target
319386 04/25/10 14:58  a-onl          End_of_Run_6738
319385 04/25/10 14:58  a-onl          End_of_Run_27504
319384 04/25/10 14:57  R. Michaels    Qsq on thin C12, raster off and on.
319383 04/25/10 14:56  mcnulty        L and Rarm Quartz signals
319382 04/25/10 14:49  R. Michaels    correction: raster is off
319381 04/25/10 14:48  a-onl          Start_Run_6738,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Q2 meas on thin Carbon
319380 04/25/10 14:47  a-onl          Start_Run_27504,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Q2 meas on thin C
319379 04/25/10 14:44  a-onl          End_of_Run_27503
319378 04/25/10 14:44  a-onl          End_of_Run_6737
319377 04/25/10 14:37  a-onl          Start_Run_27503,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Q2 meas on thin C
319382  04/25/10 14:49  R. Michaels    correction: raster is off
319376 04/25/10 14:37  a-onl          Start_Run_6737,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Q2 meas on thin Carbon
319375 04/25/10 14:36  a-onl          End_of_Run_27502
319374 04/25/10 14:31  a-onl          Start_Run_27502,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal check - T5 only - 2 uA - New pedestal -  no pedestal subtraction on first and last channels 
319373 04/25/10 14:30  a-onl          End_of_Run_27501
319372 04/25/10 14:30  a-onl          End_of_Run_6736
319371 04/25/10 14:29  R. Michaels    magnet scan and low-I cavities
319370 04/25/10 14:04  a-onl          Start_Run_27501,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal check - T5 only - 2 uA - New pedestal
319369 04/25/10 14:03  a-onl          End_of_Run_27500
319368 04/25/10 14:03  a-onl          End_of_Run_27499
319367 04/25/10 13:58  a-onl          Start_Run_6736,Run_type=Calibration,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.05 - 2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity scan check
319366 04/25/10 13:45  a-onl          Start_Run_27500,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal check - T5 only - 2 uA - New pedestal 
319365 04/25/10 13:42  A. Camsonne    Gen pedestal file updated
319364 04/25/10 13:39  R. Michaels    L-HRS network switch power cycled (late entry)
319363 04/25/10 13:36  mcnulty        Rarm VDC HV not ramping up
319489  04/25/10 19:52  R. Michaels    re: recovering VDCs (late entry)
319362 04/25/10 13:29  mcnulty        VDCs on and quartz HV at -2000 for all dets
319361 04/25/10 13:20  a-onl          Start_Run_27499,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal check - T5 only - beam low current
319360 04/25/10 13:19  Bob and Dust   Checks of ADC integrate timing
319359 04/25/10 13:19  a-onl          End_of_Run_27498
319358 04/25/10 13:18  a-onl          Start_Run_27494,Run_type=Pedestal,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem check low current - 18 KHz on BeO - T8 only
319357 04/25/10 13:15  a-onl          Start_Run_27498,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal check - T5 only
319356 04/25/10 13:14  ZAFAR AHMED    Target is empty target
319355 04/25/10 13:14  a-onl          End_of_Run_27497
319354 04/25/10 13:12  a-onl          Start_Run_27497,Run_type=Pedestal,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Pedestal run - no beam - T5 only
319353 04/25/10 13:11  a-onl          End_of_Run_27496
319352 04/25/10 13:10  a-onl          Start_Run_27496,Run_type=Pedestal,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Pedestal run - no beam - T8 only
319351 04/25/10 13:09  a-onl          End_of_Run_27495
319350 04/25/10 13:08  a-onl          Start_Run_27495,Run_type=Pedestal,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem check low current - 9 KHz on BeO - T5 only - no pedestal subtraction
319349 04/25/10 13:06  a-onl          End_of_Run_27494
319348 04/25/10 13:06  a-onl          End_of_Run_27493
319347 04/25/10 13:05  a-onl          Start_Run_27493,Run_type=Pedestal,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem check low current - 18 KHz on BeO
319346 04/25/10 13:04  a-onl          End_of_Run_27492
319345 04/25/10 13:02  a-onl          Start_Run_27492,Run_type=Pedestal,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal run with 2 uA beam
319344 04/25/10 13:00  a-onl          End_of_Run_27491
319343 04/25/10 12:58  a-onl          Start_Run_27491,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Run no beam during target change
319342 04/25/10 12:58  mcnulty        Moving to BeO target
319341 04/25/10 12:57  M Friend       Compton DAQ running at 240Hz
319340 04/25/10 12:54  a-onl          End_of_Run_27490
319339 04/25/10 12:53  A. Camsonne    Spot++ T8 only 2 uA
319338 04/25/10 12:49  a-onl          Start_Run_27490,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Spot++
319337 04/25/10 12:49  apar           End_of_Parity_Run_3128__CODA_Config=Prex
319336 04/25/10 12:48  a-onl          End_of_Run_27489
319335 04/25/10 12:48  Mindy          turn the septum on
319334 04/25/10 12:48  a-onl          Start_Run_27489,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=25 nA,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Spot++
319333 04/25/10 12:38  a-onl          End_of_Run_27488
319332 04/25/10 12:36  a-onl          Start_Run_27488,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=25 nA,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM cosmics check
319331 04/25/10 12:36  A. Camsonne    Upper scintillator left arm turned on
319330 04/25/10 12:29  apar           Start_Parity_Run_3128__CODA_Config=Prex_Run_type=Pedestal,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=empty target; test,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
319329 04/25/10 12:17  mercado        Available sync signals look fine
319481 04/25/10 18:56  mercado        DAQ sync signals at 240Hz
319328 04/25/10 11:55  mcnulty        Switched quartz dets to counting/sampling mode
319327 04/25/10 11:54  mcnulty        changed helicty from 120Hz t0 240Hz
319326 04/25/10 11:52  a-onl          Start_Run_27487,Run_type=Other,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=25 nA,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM source check
319325 04/25/10 11:42  R. Michaels    switching to 240 Hz
319324 04/25/10 11:42  ZAFAR AHMED    Amplifiers on cavities - No more than 5uA.
319323 04/25/10 11:42  apar           End_of_Parity_Run_3127__CODA_Config=Prex
319322 04/25/10 11:14  A.  Camsonne   Gem 5th  chamberHV plugged - reminder GEM HV
319321 04/25/10 11:04  apar           Start_Parity_Run_3127__CODA_Config=Prex_Run_type=Pedestal,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=empty target; test,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
319320 04/25/10 10:59  Mindy          power-cycle ROC-25-->CODA is back
319319 04/25/10 10:16  R. Michaels    reboot beamline slow controls
319318 04/25/10 10:12  Mindy          [trouble-shooting guide] temperature monitor works again
319317 04/25/10 09:42  R. Michaels    Cleanup of adaqfs.
319316 04/25/10 09:28  ZAFAR AHMED    Septum magnet is off
319315 04/25/10 09:25  R. Michaels    access, empty target
319314 04/25/10 09:21  R. Michaels    Run plan: Qsq and other
319313 04/25/10 09:04  Abdurahim      Compton DOCP scan
319312 04/25/10 08:27  Mindy          Hall-A general tool
319311 04/25/10 08:12  R. Michaels    helicity to Asym box unplugged
319310 04/25/10 08:01  adaq           Beam Time Accounting
319309 04/25/10 07:59  Yoomin         Owl Shift Summary
319308 04/25/10 07:54  R. Michaels    temp readouts need to be fixed
319307 04/25/10 07:36  apar           Start_Parity_Run_3126__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319306 04/25/10 07:35  apar           End_of_Parity_Run_3125__CODA_Config=Prex
319305 04/25/10 07:35  Yoomin         Target IOC reboot
319304 04/25/10 07:04  Yoomin         Compton HV trip
319303 04/25/10 06:08  Yoomin         Radiation/Beam stripchart
319302 04/25/10 06:05  Yoomin         Reduced beam current 40uA
319301 04/25/10 05:58  Yoomin         Prompt not perfect yet
319300 04/25/10 05:55  apar           Start_Parity_Run_3125__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319299 04/25/10 05:54  silwal         more plots on run 3119, helicity toggled @ 120 Hz
319298 04/25/10 05:54  apar           End_of_Parity_Run_3124__CODA_Config=Prex
319297 04/25/10 05:27  Yoomin         Right Q1 fluctuating
319296 04/25/10 05:14  Yoomin         Radiation/Beam stripchart
319295 04/25/10 05:12  Yoomin         Prompt works again!
319294 04/25/10 05:11  Yoomin         Compton HV trip
319293 04/25/10 05:10  Yoomin         Target Screen
319292 04/25/10 05:07  Yoomin         Compton HV trip
319291 04/25/10 05:01  apar           Start_Parity_Run_3124__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319290 04/25/10 05:00  apar           End_of_Parity_Run_3123__CODA_Config=Prex
319289 04/25/10 04:44  Yoomin         Compton HV trip/R-Q1 frequent alarm
319288 04/25/10 04:35  Yoomin         Hall A Tools Capture
319287 04/25/10 04:28  silwal         asym from the 'asym box' measured to be ~ 1.1 %
319286 04/25/10 04:18  Yoomin         Compton HV trip
319285 04/25/10 04:07  Yoomin         Compton HV trip
319284 04/25/10 03:46  Yoomin         Compton HV trip
319283 04/25/10 03:20  apar           Start_Parity_Run_3123__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319282 04/25/10 03:19  apar           End_of_Parity_Run_3122__CODA_Config=Prex
319281 04/25/10 02:55  Yoomin         Compton HV trip
319280 04/25/10 02:49  Yoomin         Collimator temperature monitor not working
319279 04/25/10 02:40  auto_snap      Temperatures snapshot
319278 04/25/10 02:40  auto_snap      Radiation and Ozone snapshot
319277 04/25/10 02:40  auto_snap      Miscellaneous snapshot
319276 04/25/10 02:40  auto_snap      Hall A Tools snapshot
319275 04/25/10 02:40  auto_snap      Compton Polarimeter snapshot
319274 04/25/10 02:40  auto_snap      BigBox Magnet snapshot
319273 04/25/10 02:40  auto_snap      Beam Position and Current snapshot
319272 04/25/10 02:09  Yoomin         Temperature monitor not working!
319271 04/25/10 01:55  Yoomin         Compton HV trip
319270 04/25/10 01:54  M Friend       Compton 120Hz crl fixed
319269 04/25/10 01:39  M Friend       /adaql10/work1 full
319268 04/25/10 01:39  apar           Start_Parity_Run_3122__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319267 04/25/10 01:38  apar           End_of_Parity_Run_3121__CODA_Config=Prex
319266 04/25/10 01:25  Yoomin         Rad/Temp/Beam strip chart
319265 04/25/10 01:11  Yoomin         Compton HV trip
319264 04/25/10 01:09  Yoomin         Target IOC reboot
319263 04/25/10 00:57  Yoomin         HV IOC Down.
319262 04/25/10 00:02  adaq           Beam Time Accounting
319261 04/25/10 00:02  bogdanw        shift summary

Saturday

319260 04/24/10 23:58  apar           Start_Parity_Run_3121__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319259 04/24/10 23:57  apar           End_of_Parity_Run_3120__CODA_Config=Prex
319258 04/24/10 23:53  silwal         120Hz toggle run
319299 04/25/10 05:54  silwal         more plots on run 3119, helicity toggled @ 120 Hz
319257 04/24/10 22:17  apar           Start_Parity_Run_3120__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319256 04/24/10 22:13  apar           End_of_Parity_Run_3119__CODA_Config=Prex
319255 04/24/10 22:11  jhlee          prompt  *** Break *** segmentation violation
319254 04/24/10 21:52  apar           Start_Parity_Run_3119__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319253 04/24/10 21:49  apar           End_of_Parity_Run_3118__CODA_Config=Prex
319252 04/24/10 21:32  Abdurahim      Compton cavity has been restored
319251 04/24/10 21:26  Mindy          comparison of dithering det_vs_bpm slope between 4x4 and 5x5 
319250 04/24/10 21:01  apar           Start_Parity_Run_3118__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319249 04/24/10 20:59  apar           End_of_Parity_Run_3117__CODA_Config=Prex
319248 04/24/10 20:13  jpchen         changed alarms
319247 04/24/10 20:07  silwal         asym ~1.2 % measured on the scope (asym-box)
319287 04/25/10 04:28  silwal         asym from the 'asym box' measured to be ~ 1.1 %
319246 04/24/10 19:55  Apar           non linearity of LUMI
319245 04/24/10 19:47  jhlee          dithering
319244 04/24/10 19:39  bogdanw        beam position and radiation monitors
319243 04/24/10 19:34  bogdanw        tools and temperatures
319242 04/24/10 19:27  silwal         asym measurement from asym box
319247  04/24/10 20:07  silwal         asym ~1.2 % measured on the scope (asym-box)
319241 04/24/10 19:21  bogdanw        HV lumi with Pb and 50 muA
319240 04/24/10 19:20  apar           Start_Parity_Run_3117__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319239 04/24/10 19:20  bogdanw        HV for Pb at 120 Hz at 50 muA
319238 04/24/10 19:18  apar           End_of_Parity_Run_3116__CODA_Config=Prex
319237 04/24/10 18:52  ZAFAR AHMED    Carbon Target Lumi High Voltages
319236 04/24/10 18:47  apar           Start_Parity_Run_3116__CODA_Config=Prex_Run_type=Test,beam_current=5-50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319235 04/24/10 18:43  bogdanw        beam on Pb target
319234 04/24/10 18:42  a-onl          End_of_Run_27485
319233 04/24/10 18:41  a-onl          Start_Run_27485,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=25 nA,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Left-arm HRS ps5 = 10, ps8 = 65535 for raster check
319232 04/24/10 18:40  ZAFAR AHMED    Lead Diamond upper Scint. rate at nA.
319231 04/24/10 18:40  auto_snap      Temperatures snapshot
319230 04/24/10 18:40  auto_snap      Radiation and Ozone snapshot
319229 04/24/10 18:39  auto_snap      Miscellaneous snapshot
319228 04/24/10 18:39  auto_snap      Hall A Tools snapshot
319227 04/24/10 18:39  auto_snap      Compton Polarimeter snapshot
319226 04/24/10 18:39  auto_snap      BigBox Magnet snapshot
319225 04/24/10 18:39  auto_snap      Beam Position and Current snapshot
319224 04/24/10 18:38  ZAFAR AHMED    Target is Lead Diamond # 3
319223 04/24/10 18:36  ZAFAR AHMED    BeO nA Rate . Slit and Attn. Adjustment.
319222 04/24/10 18:32  ZAFAR AHMED    Target is BeO - Beam Recovery
319221 04/24/10 18:26  ZAFAR AHMED    Target is Lead Diamond # 3
319220 04/24/10 18:12  ZAFAR AHMED    Target is BeO - Beam Recovery
319219 04/24/10 18:07  a-onl          End_of_Run_27484
319218 04/24/10 18:05  a-onl          Start_Run_27484,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Left-arm HRS ps5 = 3, ps8 = 65535 for raster check
319217 04/24/10 18:03  bogdanw        spot++
319216 04/24/10 18:02  adaq           spot ++
319215 04/24/10 18:01  a-onl          End_of_Run_27483
319214 04/24/10 17:59  a-onl          Start_Run_27483,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Left-arm HRS ps5 = 65000, ps8 = 2 for raster check
319213 04/24/10 17:58  a-onl          End_of_Run_27482
319212 04/24/10 17:53  a-onl          Start_Run_27482,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Left-arm HRS ps5 = 65000, ps8 = 2 for test
319211 04/24/10 17:30  apar           End_of_Parity_Run_3115__CODA_Config=Prex
319210 04/24/10 17:29  apar           Start_Parity_Run_3115__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319209 04/24/10 17:28  ZAFAR AHMED    Target is empty target
319208 04/24/10 17:27  A. Camsonne    Compton electron detector work
319207 04/24/10 17:22  apar           End_of_Parity_Run_3114__CODA_Config=Prex
319206 04/24/10 17:20  O.Glamazdin    Moller magnet has been filled
319205 04/24/10 17:19  M Friend       Compton photon collimator moved
319204 04/24/10 17:10  apar           Start_Parity_Run_3114__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319203 04/24/10 16:33  apar           End_of_Parity_Run_3113__CODA_Config=Prex
319202 04/24/10 16:29  R. Michaels    modified warnings about ADC18
319201 04/24/10 16:24  silwal         target: false alarms on gas panels, to do with LD2 that does not exist
319248 04/24/10 20:13  jpchen         changed alarms
319200 04/24/10 16:13  jhlee          screenshot of Dithering
319199 04/24/10 16:10  jhlee          ROC 23 has the same error meassage as 318478 
319202 04/24/10 16:29  R. Michaels    modified warnings about ADC18
319198 04/24/10 16:04  adaq           Beam Time Accounting
319197 04/24/10 16:04  Sergey Abrah   Day shift summary - 04/24/2010
319196 04/24/10 16:02  apar           Start_Parity_Run_3113__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Prodiction(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319195 04/24/10 15:58  apar           End_of_Parity_Run_3112__CODA_Config=Prex
319194 04/24/10 15:57  R. Michaels    Adjusting HV for 120Hz C12
319193 04/24/10 15:34  R. Michaels    prep for 120 Hz running
319192 04/24/10 15:31  Apar           Changed to 120 Hz
319191 04/24/10 15:28  aserg          Helicity frequency changed to 120 Hz
319190 04/24/10 15:19  apar           Start_Parity_Run_3112__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Prodiction(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319189 04/24/10 15:13  M Friend       Compton running at 120Hz
319270 04/25/10 01:54  M Friend       Compton 120Hz crl fixed
319341 04/25/10 12:57  M Friend       Compton DAQ running at 240Hz
319188 04/24/10 15:13  R. Michaels    info about synch mon status
319187 04/24/10 15:06  apar           End_of_Parity_Run_3111__CODA_Config=Prex
319186 04/24/10 14:55  aserg          No beam
319185 04/24/10 14:53  apar           Start_Parity_Run_3111__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319184 04/24/10 14:51  apar           End_of_Parity_Run_3110__CODA_Config=Prex
319183 04/24/10 14:42  Bob and Mark   check of timing signals in CH
319182 04/24/10 14:31  apar           Start_Parity_Run_3110__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319181 04/24/10 14:23  aserg          Beam off
319180 04/24/10 14:17  apar           Start_Parity_Run_3109__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319179 04/24/10 14:15  apar           End_of_Parity_Run_3108__CODA_Config=Prex
319178 04/24/10 14:05  aserg          CODA works again
319177 04/24/10 14:03  apar           Start_Parity_Run_3108__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319176 04/24/10 14:01  aserg          CODA not working
319175 04/24/10 13:58  apar           Start_Parity_Run_3107__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319174 04/24/10 13:36  apar           Start_Parity_Run_3106__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319173 04/24/10 13:35  apar           End_of_Parity_Run_3105__CODA_Config=Prex
319172 04/24/10 13:30  aserg          Compton HV trip
319171 04/24/10 13:15  aserg          Dithering plot
319170 04/24/10 13:14  aserg          Beam and radiation monitors
319169 04/24/10 13:12  aserg          Temperature monitor
319168 04/24/10 12:45  apar           Start_Parity_Run_3105__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319167 04/24/10 12:44  apar           End_of_Parity_Run_3104__CODA_Config=Prex
319166 04/24/10 12:17  adpalmer       reboot preformed
319165 04/24/10 12:13  adpalmer       target vacuum glitch
319164 04/24/10 11:54  apar           Start_Parity_Run_3104__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319163 04/24/10 11:53  apar           End_of_Parity_Run_3103__CODA_Config=Prex
319162 04/24/10 11:52  dalton         ROOTfiles moved
319161 04/24/10 11:06  aserg          Compton HV trip
319160 04/24/10 11:03  apar           Start_Parity_Run_3103__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319159 04/24/10 11:02  apar           End_of_Parity_Run_3102__CODA_Config=Prex
319158 04/24/10 10:39  auto_snap      Temperatures snapshot
319157 04/24/10 10:39  auto_snap      Radiation and Ozone snapshot
319156 04/24/10 10:39  auto_snap      Miscellaneous snapshot
319155 04/24/10 10:39  auto_snap      Hall A Tools snapshot
319154 04/24/10 10:39  auto_snap      Compton Polarimeter snapshot
319153 04/24/10 10:39  auto_snap      BigBox Magnet snapshot
319152 04/24/10 10:39  auto_snap      Beam Position and Current snapshot
319151 04/24/10 10:36  aserg          Compton HV trip
319150 04/24/10 10:12  apar           Start_Parity_Run_3102__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319149 04/24/10 10:11  apar           End_of_Parity_Run_3101__CODA_Config=Prex
319148 04/24/10 09:34  aserg          Dithering
319147 04/24/10 09:21  apar           Start_Parity_Run_3101__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319146 04/24/10 09:20  apar           End_of_Parity_Run_3100__CODA_Config=Prex
319145 04/24/10 09:04  aserg          Radiation and beam monitors
319144 04/24/10 09:01  aserg          Temperature monitor strip
319143 04/24/10 08:47  aserg          Compton HV trip
319142 04/24/10 08:33  aserg          Compton HV trip
319141 04/24/10 08:30  apar           Start_Parity_Run_3100__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319140 04/24/10 08:29  apar           End_of_Parity_Run_3099__CODA_Config=Prex
319139 04/24/10 08:05  ZAFAR AHMED    April 24 owl sfit summary
319138 04/24/10 08:04  adaq           Beam Time Accounting
319137 04/24/10 07:59  Abdurahim      Compton strip chart
319136 04/24/10 07:39  apar           Start_Parity_Run_3099__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319135 04/24/10 07:37  ZAFAR AHMED    Flipper worked- Slug no. is 13
319134 04/24/10 07:37  apar           Halfwave plate OUT, Slug 13
319133 04/24/10 07:36  ZAFAR AHMED    Fipper script error
319132 04/24/10 07:25  apar           End_of_Parity_Run_3098__CODA_Config=Prex
319131 04/24/10 07:05  Abdurahim      Compton HV tripped
319130 04/24/10 07:00  Abdurahim      Beam is back. Compton HV tripped.
319129 04/24/10 06:58  Abdurahim      beam is off
319128 04/24/10 06:36  apar           Start_Parity_Run_3098__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319127 04/24/10 06:35  apar           End_of_Parity_Run_3097__CODA_Config=Prex
319126 04/24/10 06:20  Abdurahim      Compton HV trip
319125 04/24/10 05:45  ZAFAR AHMED    Dithering
319124 04/24/10 05:45  apar           Start_Parity_Run_3097__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319123 04/24/10 05:44  apar           End_of_Parity_Run_3096__CODA_Config=Prex
319122 04/24/10 05:29  Abdurahim      Compton HV trip
319121 04/24/10 05:05  Abdurahim      Beam back. Compton HV tripped.
319120 04/24/10 05:01  Abdurahim      magnet power supply tripped
319119 04/24/10 05:00  Abdurahim      almost two hours with no beam trip
319118 04/24/10 04:54  apar           Start_Parity_Run_3096__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319117 04/24/10 04:53  apar           End_of_Parity_Run_3095__CODA_Config=Prex
319116 04/24/10 04:50  Abdurahim      Target temperature
319115 04/24/10 04:43  Abdurahim      Compton rates are beautifully stable
319114 04/24/10 04:41  Abdurahim      Compton HV trip
319113 04/24/10 04:32  ZAFAR AHMED    Dithering
319112 04/24/10 04:03  apar           Start_Parity_Run_3095__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319111 04/24/10 04:02  apar           End_of_Parity_Run_3094__CODA_Config=Prex
319110 04/24/10 03:40  ZAFAR AHMED    Dithering
319109 04/24/10 03:24  Abdurahim      StriptCharts
319108 04/24/10 03:12  apar           Start_Parity_Run_3094__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319107 04/24/10 03:11  apar           End_of_Parity_Run_3093__CODA_Config=Prex
319106 04/24/10 02:39  auto_snap      Temperatures snapshot
319105 04/24/10 02:39  auto_snap      Radiation and Ozone snapshot
319104 04/24/10 02:39  auto_snap      Miscellaneous snapshot
319103 04/24/10 02:39  auto_snap      Hall A Tools snapshot
319102 04/24/10 02:38  auto_snap      Compton Polarimeter snapshot
319101 04/24/10 02:38  auto_snap      BigBox Magnet snapshot
319100 04/24/10 02:38  auto_snap      Beam Position and Current snapshot
319099 04/24/10 02:21  apar           Start_Parity_Run_3093__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319098 04/24/10 02:20  apar           End_of_Parity_Run_3092__CODA_Config=Prex
319097 04/24/10 02:19  Abdurahim      Compton HV tripped
319096 04/24/10 01:55  Abdurahim      started Compton laser polarization scan
319095 04/24/10 01:32  ZAFAR AHMED    Dithering is working
319094 04/24/10 01:31  apar           Start_Parity_Run_3092__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319093 04/24/10 01:29  apar           End_of_Parity_Run_3091__CODA_Config=Prex
319092 04/24/10 01:28  Abdurahim      How to Start Target Strip Chart
319091 04/24/10 01:26  apar           Start_Parity_Run_3091__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319090 04/24/10 01:25  apar           End_of_Parity_Run_3090__CODA_Config=Prex
319089 04/24/10 01:22  apar           Start_Parity_Run_3090__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319088 04/24/10 01:20  apar           End_of_Parity_Run_3089__CODA_Config=Prex
319087 04/24/10 01:18  apar           Start_Parity_Run_3089__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319086 04/24/10 01:15  apar           Start_Parity_Run_3088__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319085 04/24/10 01:09  apar           End_of_Parity_Run_3086__CODA_Config=Prex
319084 04/24/10 01:00  apar           Start_Parity_Run_3086__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode(Carbon),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
319083 04/24/10 00:59  apar           End_of_Parity_Run_3085__CODA_Config=Prex
319082 04/24/10 00:55  ZAFAR AHMED    Dithering is not working
319081 04/24/10 00:33  adaq           Beam Time Accounting
319080 04/24/10 00:28  ZAFAR AHMED    Dithering is off
319079 04/24/10 00:27  Abdurahim      target epics problem
319078 04/24/10 00:17  ZAFAR AHMED    New slug(13) but half wave plate is not changed
319077 04/24/10 00:10  Mindy          04/23/2010 Swing Shift Summary
319076 04/24/10 00:10  R. Michaels    putting in thick C12
319075 04/24/10 00:09  N. Muangma     target thick carbon
319074 04/24/10 00:09  apar           Start_Parity_Run_3085__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319073 04/24/10 00:08  apar           End_of_Parity_Run_3084__CODA_Config=Prex

Friday

319072 04/23/10 23:54  apar           Start_Parity_Run_3084__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319071 04/23/10 23:49  M Friend       Compton photon detector HV
319070 04/23/10 23:48  apar           End_of_Parity_Run_3083__CODA_Config=Prex
319069 04/23/10 23:43  adaq           Compton FADC crl accum thresh changed
319915 04/27/10 21:42  M Friend       Comptno FADC crl accum thresh changed
319068 04/23/10 23:30  M Friend       Compton EPICS reboot
319067 04/23/10 23:06  apar           End_of_Parity_Run_3082__CODA_Config=Prex
319066 04/23/10 23:06  apar           Start_Parity_Run_3083__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319065 04/23/10 22:29  Mindy          temperature become stable now
319064 04/23/10 22:12  apar           Start_Parity_Run_3082__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319063 04/23/10 22:11  apar           End_of_Parity_Run_3081__CODA_Config=Prex
319062 04/23/10 21:34  Mindy          dithering comes back
319061 04/23/10 21:21  apar           Start_Parity_Run_3081__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319060 04/23/10 21:02  apar           Start_Parity_Run_3080__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319059 04/23/10 20:45  apar           End_of_Parity_Run_3079__CODA_Config=Prex
319058 04/23/10 20:44  Mindy          temperature is increasing
319057 04/23/10 20:38  Mindy          dithering correlations/slopes (1)
319056 04/23/10 20:23  R.Michaels     watch the temps (with bigger raster) !
319058 04/23/10 20:44  Mindy          temperature is increasing
319055 04/23/10 20:20  Mindy          temperature increase?
319054 04/23/10 20:14  M Friend       Compton FADC crl accum thresh changed
319053 04/23/10 20:00  M Friend       Compton FADC crl change
319052 04/23/10 19:52  apar           Start_Parity_Run_3079__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319051 04/23/10 19:49  apar           End_of_Parity_Run_3078__CODA_Config=Prex
319050 04/23/10 19:39  apar           Start_Parity_Run_3078__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319049 04/23/10 19:38  apar           End_of_Parity_Run_3077__CODA_Config=Prex
319048 04/23/10 19:28  M Friend       strange Compton EPICS glitch
319047 04/23/10 19:25  Mindy          Hall-A general tool
319046 04/23/10 19:06  Mindy          dithering works well
319045 04/23/10 19:05  Mindy          spot++ for production
319044 04/23/10 19:01  a-onl          Start_Run_27480,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Left-arm HRS ps5 = 65000, ps8 = 2 for production
319043 04/23/10 19:00  a-onl          End_of_Run_27479
319042 04/23/10 18:59  a-onl          Start_Run_27479,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 65000, ps8 = 2 for production
319041 04/23/10 18:49  apar           Start_Parity_Run_3077__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production mode,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
319040 04/23/10 18:46  R. Michaels    reducing spot size, possible burn ring
319039 04/23/10 18:40  a-onl          End_of_Run_6735
319038 04/23/10 18:40  a-onl          End_of_Run_27478
319037 04/23/10 18:40  a-onl          End_of_Run_27478
319036 04/23/10 18:40  a-onl          End_of_Run_6735
319035 04/23/10 18:38  auto_snap      Temperatures snapshot
319034 04/23/10 18:38  auto_snap      Radiation and Ozone snapshot
319033 04/23/10 18:38  auto_snap      Miscellaneous snapshot
319032 04/23/10 18:38  auto_snap      Hall A Tools snapshot
319031 04/23/10 18:38  auto_snap      Compton Polarimeter snapshot
319030 04/23/10 18:38  auto_snap      BigBox Magnet snapshot
319029 04/23/10 18:38  auto_snap      Beam Position and Current snapshot
319028 04/23/10 18:32  dalton         High statistics and zoom of recent Pb/C runs
319027 04/23/10 18:31  a-onl          Start_Run_6735,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K raster is now 26x10, centered
319026 04/23/10 18:31  a-onl          Start_Run_27478,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K raster is now 26x10, centered
319025 04/23/10 18:30  a-onl          End_of_Run_27472
319024 04/23/10 18:24  R. Michaels    Moving beam horizontally
319023 04/23/10 18:20  a-onl          Start_Run_27477,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K raster is now 30x12, centered
319022 04/23/10 18:20  a-onl          Start_Run_6734,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K raster is now 30x12, centered
319021 04/23/10 18:19  a-onl          End_of_Run_27476
319020 04/23/10 18:14  a-onl          End_of_Run_6733
319019 04/23/10 18:07  a-onl          Start_Run_27476,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K raster is now 30x12, move horiz other way
319018 04/23/10 18:06  a-onl          Start_Run_6733,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K raster is now 30x12, move beam horiz other way
319017 04/23/10 18:04  a-onl          End_of_Run_27475
319016 04/23/10 18:04  a-onl          End_of_Run_6732
319015 04/23/10 17:55  a-onl          Start_Run_6732,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K raster is now 30x12, move beam horiz one way
319014 04/23/10 17:55  a-onl          Start_Run_27475,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K raster is now 30x12, move horiz one way
319013 04/23/10 17:49  a-onl          End_of_Run_27474
319012 04/23/10 17:49  a-onl          End_of_Run_6731
319011 04/23/10 17:49  R. Michaels    vertical scan, fishing for Cu frame.
319010 04/23/10 17:44  a-onl          Start_Run_6731,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K raster is now 30x12, move beam down
319009 04/23/10 17:43  a-onl          Start_Run_27474,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K raster is now 30x12, move beam down
319008 04/23/10 17:42  a-onl          End_of_Run_27473
319007 04/23/10 17:42  a-onl          End_of_Run_6730
319006 04/23/10 17:36  Mindy          FYI: bad dithering run-list
319005 04/23/10 17:35  a-onl          Start_Run_6730,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K raster is now 30x12, move beam up
319004 04/23/10 17:35  a-onl          Start_Run_27473,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K raster is now 30x12, move beam up
319003 04/23/10 17:32  a-onl          End_of_Run_6729
319002 04/23/10 17:32  a-onl          End_of_Run_6729
319001 04/23/10 17:32  R. Michaels    Pb/D raster plots, bigger raster
319000 04/23/10 17:23  dalton         Higher statistics and zoom of previous Pb/D
318999 04/23/10 17:22  a-onl          Start_Run_27472,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K raster is now 30x12
318998 04/23/10 17:22  a-onl          Start_Run_6729,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K raster is now 30x12
318997 04/23/10 17:18  R. Michaels    Pb/D raster plots, and plan
318996 04/23/10 17:17  a-onl          End_of_Run_27471
318995 04/23/10 17:14  a-onl          End_of_Run_6728
318994 04/23/10 17:05  a-onl          Start_Run_27471,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K
318993 04/23/10 17:05  a-onl          Start_Run_6728,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K
318992 04/23/10 17:04  M Friend       Compton FADC crl change
319053 04/23/10 20:00  M Friend       Compton FADC crl change
318991 04/23/10 17:04  N Muangma      target PbD#3
318990 04/23/10 17:01  a-onl          End_of_Run_27470
318988 04/23/10 17:00  R. Michaels    BeO sampling with 4x3 raster
318987 04/23/10 16:55  a-onl          Start_Run_6727,Run_type=Spot++,target_type=BeO,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5=2 ps8=65K
318986 04/23/10 16:54  a-onl          Start_Run_27470,Run_type=Spot++,target_type=BeO,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=ps5 = 4, ps8 = 65K
318985 04/23/10 16:50  a-onl          End_of_Run_6726
318984 04/23/10 16:50  a-onl          End_of_Run_27469
318983 04/23/10 16:45  R. Michaels    Raster scan.  Spot_L
318982 04/23/10 16:38  a-onl          Start_Run_27469,Run_type=Spot++,target_type=BeO,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318981 04/23/10 16:38  a-onl          Start_Run_6726,Run_type=Spot++,target_type=BeO,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318980 04/23/10 16:38  a-onl          End_of_Run_27468
318979 04/23/10 16:38  a-onl          End_of_Run_6725
318978 04/23/10 16:35  a-onl          Start_Run_6725,Run_type=Spot++,target_type=BeO,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318977 04/23/10 16:32  a-onl          Start_Run_27468,Run_type=Spot++,target_type=BeO,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318976 04/23/10 16:17  apar           End_of_Parity_Run_3076__CODA_Config=Prex
318975 04/23/10 16:17  mercado        Thick Carbon Detector Widths and Correlations
318974 04/23/10 16:16  jwexler        HVs changed back.
318973 04/23/10 16:15  N. Muangma     target moves BeO
318972 04/23/10 16:04  Mindy          Hall-A general tool
318971 04/23/10 16:02  apar           Start_Parity_Run_3076__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
318970 04/23/10 16:01  adaq           Beam Time Accounting
318969 04/23/10 16:01  jwexler        Shift summary - Day 04/23/2010
318968 04/23/10 16:00  apar           End_of_Parity_Run_3075__CODA_Config=Prex
318967 04/23/10 15:56  jwexler        Change to thick carbon HVs.
318966 04/23/10 15:52  apar           Start_Parity_Run_3075__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Test,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
318965 04/23/10 15:48  M Friend       Compton FADC crl accum thresh changed
318964 04/23/10 15:41  jwexler        Changed target - thick carbon
318963 04/23/10 15:39  jwexler        Detector and Lumi HVs changed
318962 04/23/10 15:31  apar           End_of_Parity_Run_3074__CODA_Config=Prex
318961 04/23/10 15:30  O.Glamazdin    Moller magnet has been filled
318960 04/23/10 14:41  apar           Start_Parity_Run_3074__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 12:IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318959 04/23/10 14:39  apar           End_of_Parity_Run_3073__CODA_Config=Prex
318958 04/23/10 14:18  aserg          Dithering
318957 04/23/10 13:49  apar           Start_Parity_Run_3073__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 12:IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318956 04/23/10 13:48  apar           End_of_Parity_Run_3072__CODA_Config=Prex
318955 04/23/10 13:37  jwexler        LeCroy beamline crate alarm
318954 04/23/10 12:59  apar           Start_Parity_Run_3072__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 12:IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318953 04/23/10 12:58  apar           End_of_Parity_Run_3071__CODA_Config=Prex
318952 04/23/10 12:56  Abdurahim      Compton cavity and laser is runnning again
318951 04/23/10 12:09  jwexler        Hall A tools
318950 04/23/10 12:08  jwexler        Target screen and stripcharts
318949 04/23/10 12:08  apar           Start_Parity_Run_3071__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 12:IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318948 04/23/10 12:07  apar           End_of_Parity_Run_3070__CODA_Config=Prex
318947 04/23/10 12:03  mercado        Re-prompting of slug 10 in progress
318946 04/23/10 11:49  mercado        Re-Prompting of slug 11 in progress
318947  04/23/10 12:03  mercado        Re-prompting of slug 10 in progress
318945 04/23/10 11:48  Abdurahim      mysterious compton epics reboot
318944 04/23/10 11:36  mercado        Wrong BCM mapping.
318943 04/23/10 11:36  dalton         Changes to database
318942 04/23/10 11:17  apar           Start_Parity_Run_3070__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 12:IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318941 04/23/10 11:15  apar           End_of_Parity_Run_3069__CODA_Config=Prex
318940 04/23/10 11:01  aserg          Dithering
318939 04/23/10 11:01  jwexler        Radiation and temp. stripcharts
318938 04/23/10 10:42  mercado        Changed Gains of BPM 18-bit ADCs
318937 04/23/10 10:38  auto_snap      Temperatures snapshot
318936 04/23/10 10:38  auto_snap      Radiation and Ozone snapshot
318935 04/23/10 10:38  auto_snap      Miscellaneous snapshot
318934 04/23/10 10:38  auto_snap      Hall A Tools snapshot
318933 04/23/10 10:37  auto_snap      Compton Polarimeter snapshot
318932 04/23/10 10:37  auto_snap      BigBox Magnet snapshot
318931 04/23/10 10:37  auto_snap      Beam Position and Current snapshot
318930 04/23/10 10:27  apar           Start_Parity_Run_3069__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 12:IHWP IN (First run with adjusted BPM ADCX gains),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318929 04/23/10 10:23  apar           End_of_Parity_Run_3068__CODA_Config=Prex
318928 04/23/10 09:33  apar           Start_Parity_Run_3068__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 12:IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318927 04/23/10 09:32  apar           End_of_Parity_Run_3067__CODA_Config=Prex
318926 04/23/10 08:43  apar           Start_Parity_Run_3067__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 12:IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318925 04/23/10 08:41  apar           End_of_Parity_Run_3066__CODA_Config=Prex
318924 04/23/10 08:36  jwexler        Compton HV trip
318923 04/23/10 08:25  Yoomin         Compton HV trip
318922 04/23/10 08:10  adaq           Beam Time Accounting
318921 04/23/10 08:04  adaq           Beam Time Accounting
318920 04/23/10 07:52  Yoomin         PREX DAQ crash
318919 04/23/10 07:52  apar           Start_Parity_Run_3066__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318918 04/23/10 07:49  apar           End_of_Parity_Run_3065__CODA_Config=Prex
318917 04/23/10 07:48  apar           Start_Parity_Run_3065__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318916 04/23/10 07:45  apar           Start_Parity_Run_3064__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318915 04/23/10 07:20  Yoomin         Target stripchart
318914 04/23/10 07:18  Yoomin         Compton HV trip
318913 04/23/10 07:07  apar           Start_Parity_Run_3063__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318912 04/23/10 07:06  apar           End_of_Parity_Run_3062__CODA_Config=Prex
318911 04/23/10 06:39  Yoomin         Radiation/Temperature/Beam
318910 04/23/10 06:38  Yoomin         Hall A Tools
318909 04/23/10 06:35  Yoomin         Compton HV trip
318908 04/23/10 06:23  ZAFAR AHMED    Dithering
318907 04/23/10 06:17  Yoomin         Compton Run 22654 ended due to HWP flip
318906 04/23/10 06:16  apar           Start_Parity_Run_3062__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=IHWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318905 04/23/10 06:14  ZAFARA AHMED   New Slug - Half Wave Plate IN
318904 04/23/10 06:14  apar           Halfwave plate IN, Slug 12
318903 04/23/10 06:11  apar           End_of_Parity_Run_3061__CODA_Config=Prex
318902 04/23/10 06:07  apar           Start_Parity_Run_3061__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318901 04/23/10 06:06  apar           End_of_Parity_Run_3060__CODA_Config=Prex
318900 04/23/10 05:42  Yoomin         Target IOC reboot
318899 04/23/10 05:15  apar           Start_Parity_Run_3060__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318898 04/23/10 05:13  ZAFAR AHMED    Dithering
318897 04/23/10 05:10  Yoomin         Target Screen Capture
318896 04/23/10 05:10  apar           End_of_Parity_Run_3059__CODA_Config=Prex
318895 04/23/10 05:09  Yoomin         Compton Strip Chart
318894 04/23/10 04:19  apar           Start_Parity_Run_3059__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318893 04/23/10 04:18  apar           End_of_Parity_Run_3058__CODA_Config=Prex
318892 04/23/10 04:10  ZAFAR AHMED    Dithering
318891 04/23/10 03:59  Yoomin         HV trip
318890 04/23/10 03:36  ZAFARA AHMED   Ditheirng is working
318889 04/23/10 03:35  ZAFARA AHMED   Dithering error(2)
318888 04/23/10 03:33  ZAFARA AHMED   Dithering error
318887 04/23/10 03:27  apar           Start_Parity_Run_3058__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318886 04/23/10 03:26  apar           End_of_Parity_Run_3057__CODA_Config=Prex
318885 04/23/10 02:40  Yoomin         Compton HV trip
318884 04/23/10 02:37  auto_snap      Temperatures snapshot
318883 04/23/10 02:37  auto_snap      Radiation and Ozone snapshot
318882 04/23/10 02:37  auto_snap      Miscellaneous snapshot
318881 04/23/10 02:37  auto_snap      Hall A Tools snapshot
318880 04/23/10 02:37  auto_snap      Compton Polarimeter snapshot
318879 04/23/10 02:37  auto_snap      BigBox Magnet snapshot
318878 04/23/10 02:37  auto_snap      Beam Position and Current snapshot
318877 04/23/10 02:37  apar           Start_Parity_Run_3057__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318876 04/23/10 02:35  apar           End_of_Parity_Run_3056__CODA_Config=Prex
318875 04/23/10 02:13  M Friend       Compton EPICS rate changed
318874 04/23/10 02:08  M Friend       Compton prescale set to 32
318873 04/23/10 01:51  ZAFAR AHMED    Dithering
318872 04/23/10 01:44  M Friend       Compton photon beam position
318871 04/23/10 01:42  apar           Start_Parity_Run_3056__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318870 04/23/10 01:38  Yoomin         Target screen capture - beam recovered
318869 04/23/10 01:34  apar           Start_Parity_Run_3055__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318868 04/23/10 01:18  apar           Start_Parity_Run_3054__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318867 04/23/10 01:17  apar           End_of_Parity_Run_3053__CODA_Config=Prex
318866 04/23/10 01:16  apar           Start_Parity_Run_3053__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318865 04/23/10 01:13  apar           End_of_Parity_Run_3052__CODA_Config=Prex
318864 04/23/10 01:03  apar           Start_Parity_Run_3052__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318863 04/23/10 01:02  apar           End_of_Parity_Run_3051__CODA_Config=Prex
318862 04/23/10 00:56  apar           Start_Parity_Run_3051__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318861 04/23/10 00:44  A. Camsonne    Electron detector analog signal - scope setting
318860 04/23/10 00:29  R. Michaels    upper scint HV off
318859 04/23/10 00:29  A. Camsonne    Electron detector analog signal
318858 04/23/10 00:29  a-onl          End_of_Run_27467
318857 04/23/10 00:28  R. Michaels    raster check on Pb/D
319000 04/23/10 17:23  dalton         Higher statistics and zoom of previous Pb/D
318856 04/23/10 00:25  a-onl          Start_Run_27467,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.002,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=checking Pb/D raster current
318855 04/23/10 00:24  a-onl          End_of_Run_27466
318854 04/23/10 00:22  a-onl          Start_Run_27466,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=checking Pb/D raster current
318853 04/23/10 00:19  Yoomin         Target Pb Diamond #3
318852 04/23/10 00:19  R. Michaels    BeO check, establish few nA
318851 04/23/10 00:09  Yoomin         Target motion to BeO
318850 04/23/10 00:07  a-onl          End_of_Run_27465
318849 04/23/10 00:06  R. Michaels    spot++ and beam position
318848 04/23/10 00:04  adaq           Beam Time Accounting

Thursday

318847 04/22/10 23:58  a-onl          Start_Run_27465,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318846 04/22/10 23:58  a-onl          End_of_Run_27464
318845 04/22/10 23:56  a-onl          Start_Run_27464,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318844 04/22/10 23:46  jpchen         swing shift summary
318843 04/22/10 23:37  R. Michaels    turned on septum
318842 04/22/10 23:32                 Moller test run finished
318841 04/22/10 23:30  O.Glamazdin    Moller measurements result
318840 04/22/10 23:15  apar           End_of_Parity_Run_3050__CODA_Config=Prex
318839 04/22/10 23:15  M Friend       Compton DAQ set to 240Hz
318838 04/22/10 23:11  O.Glamazdin    Helicity board settins have been restored
318837 04/22/10 23:05  a-onl          End_of_Run_27463
318836 04/22/10 23:02  a-onl          Start_Run_27463,Run_type=Pedestal,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Test prescale 0 on T8
318835 04/22/10 22:55  a-onl          End_of_Run_27462
318834 04/22/10 22:51  a-onl          Start_Run_27462,Run_type=Pedestal,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Test prescale 0 on T8 
318833 04/22/10 22:47  A. Camsonne    GEM pedestal runs
318832 04/22/10 22:42  a-onl          End_of_Run_27461
318831 04/22/10 22:41  a-onl          Start_Run_27461,Run_type=Pedestal,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM pedestal run HV on
318830 04/22/10 22:40  a-onl          Start_Run_27459,Run_type=Check out,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal check - channels 0 239 240 and 479 on each planes without pedestal subtraction
318829 04/22/10 22:39  a-onl          Start_Run_27460,Run_type=Pedestal,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM pedestal run HV on
318828 04/22/10 22:27  a-onl          End_of_Run_27459
318827 04/22/10 22:25  a-onl          End_of_Run_27458
318826 04/22/10 22:25  a-onl          Start_Run_27458,Run_type=Check out,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal check - channels 0 239 240 and 479 on each planes without pedestal subtraction
318825 04/22/10 22:24  a-onl          Start_Run_27457,Run_type=Check out,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Gem pedestal check 
318824 04/22/10 22:16  M Friend       Compton FADC crl far accum thresh changed
318965 04/23/10 15:48  M Friend       Compton FADC crl accum thresh changed
319054 04/23/10 20:14  M Friend       Compton FADC crl accum thresh changed
319069 04/23/10 23:43  adaq           Compton FADC crl accum thresh changed
318823 04/22/10 22:03  a-onl          End_of_Run_27457
318822 04/22/10 21:41  a-onl          End_of_Run_27456
318821 04/22/10 21:39  a-onl          Start_Run_27456,Run_type=Pedestal,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Pedestal run ( 100 Hz )
318820 04/22/10 21:39  a-onl          End_of_Run_27455
318819 04/22/10 21:37  a-onl          Start_Run_27455,Run_type=Pedestal,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Test GEMs fifth chamber 
318818 04/22/10 18:37  auto_snap      Temperatures snapshot
318817 04/22/10 18:37  auto_snap      Radiation and Ozone snapshot
318816 04/22/10 18:37  auto_snap      Miscellaneous snapshot
318815 04/22/10 18:37  auto_snap      Hall A Tools snapshot
318814 04/22/10 18:37  auto_snap      Compton Polarimeter snapshot
318813 04/22/10 18:37  auto_snap      BigBox Magnet snapshot
318812 04/22/10 18:37  auto_snap      Beam Position and Current snapshot
318811 04/22/10 18:07  dalton         Energy excursion last night
318810 04/22/10 17:09  apar           Start_Parity_Run_3050__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=backed away from changes... back to pedestal runs...,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318809 04/22/10 17:05  apar           End_of_Parity_Run_3049__CODA_Config=Prex
318808 04/22/10 17:01  apar           Start_Parity_Run_3049__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=after changing BPM adc gain levels - try again,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318807 04/22/10 17:00  apar           Start_Parity_Run_3048__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=First run after changing BPM adc gain levels,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318806 04/22/10 16:59  apar           End_of_Parity_Run_3048__CODA_Config=Prex
318805 04/22/10 16:53  jpchen         target ioc rebooted
318804 04/22/10 16:51  apar           End_of_Parity_Run_3047__CODA_Config=Prex
318803 04/22/10 16:42  jpchen         target temperature reading stopped since this morning
318802 04/22/10 16:06  J. Zhang       Shift Summary
318801 04/22/10 16:06  adaq           Beam Time Accounting
318800 04/22/10 15:38  M Friend       Compton DAQ set to 30Hz
318839 04/22/10 23:15  M Friend       Compton DAQ set to 240Hz
318799 04/22/10 15:37  M Friend       Compton FADC crl change
318798 04/22/10 15:06  jwexler        Tiefenback dp/p
318797 04/22/10 15:02  O.Glamazdin    Helicity Board changes
318796 04/22/10 14:30  M Friend       Compton FADC crl accum thresh changed
318824 04/22/10 22:16  M Friend       Compton FADC crl far accum thresh changed
318795 04/22/10 14:26  apar           Start_Parity_Run_3047__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318794 04/22/10 14:25  apar           End_of_Parity_Run_3046__CODA_Config=Prex
318793 04/22/10 14:15  jwexler        Target screen/stripchart
318792 04/22/10 14:12  jwexler        Temp/Rad charts
318791 04/22/10 14:09  jwexler        Hall A Tools
318790 04/22/10 13:59  M Friend       Compton DAQ restored
318789 04/22/10 13:48  J. Zhang       Moller VME crates rebooted
318788 04/22/10 13:39  jwexler        Back to beam permit
318787 04/22/10 13:39  A. Camsonne    Did not receive page in the HRS hut
318786 04/22/10 13:36  apar           Start_Parity_Run_3046__CODA_Config=Prex_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318785 04/22/10 13:29  A. Camsonne    GEM gas line and electronics hooked up on fifth chamber
318784 04/22/10 13:19  J. Zhang       Moller solenoid was refilled
318783 04/22/10 13:18                 Moller solenoid was refilled
318782 04/22/10 13:02  auto_snap      Temperatures snapshot
318781 04/22/10 13:02  auto_snap      Radiation and Ozone snapshot
318780 04/22/10 13:02  auto_snap      Miscellaneous snapshot
318779 04/22/10 13:02  auto_snap      Hall A Tools snapshot
318778 04/22/10 13:02  auto_snap      Compton Polarimeter snapshot
318777 04/22/10 13:02  auto_snap      BigBox Magnet snapshot
318776 04/22/10 13:02  auto_snap      Beam Position and Current snapshot
318775 04/22/10 12:42  M Friend       Compton photon signal in the CH
318774 04/22/10 12:23  apar           End_of_Parity_Run_3045__CODA_Config=CHInj2
318773 04/22/10 12:08  apar           Start_Parity_Run_3045__CODA_Config=CHInj2_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Injector studies::PC pos (-3.2 mils,-9.2 mils) Flip Right + Reza's flip Left,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318772 04/22/10 11:36  apar           End_of_Parity_Run_3044__CODA_Config=CHInj2
318771 04/22/10 11:29  apar           Start_Parity_Run_3044__CODA_Config=CHInj2_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Injector studies::PC pos (-3.2 mils,-9.2 mils) Wein Flip Right, lens 0I01 ON,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318770 04/22/10 11:24  apar           End_of_Parity_Run_3043__CODA_Config=CHInj2
318769 04/22/10 11:14  apar           Start_Parity_Run_3043__CODA_Config=CHInj2_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Injector studies::PC pos (-3.2 mils,-9.2 mils) Wein Flip Right, lens 0I01 OFF,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318768 04/22/10 11:09  apar           End_of_Parity_Run_3042__CODA_Config=CHInj2
318767 04/22/10 11:03  apar           Start_Parity_Run_3042__CODA_Config=CHInj2_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Injector studies::PC pos (-3.2 mils,-9.2 mils) Wein Flip Left,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318766 04/22/10 10:36  auto_snap      Temperatures snapshot
318765 04/22/10 10:36  auto_snap      Radiation and Ozone snapshot
318764 04/22/10 10:36  auto_snap      Hall A Tools snapshot
318763 04/22/10 10:36  auto_snap      Compton Polarimeter snapshot
318762 04/22/10 10:36  auto_snap      BigBox Magnet snapshot
318761 04/22/10 10:36  auto_snap      Beam Position and Current snapshot
318760 04/22/10 10:33  jwexler        Septum off
318759 04/22/10 10:23  ZAFAR AHMED    Going to controlled access
318758 04/22/10 10:15  apar           End_of_Parity_Run_3041__CODA_Config=CHInj2
318757 04/22/10 10:07  apar           Start_Parity_Run_3041__CODA_Config=CHInj2_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Injector studies::PC pos (-3.2 mils,-9.2 mils) Wein Flip Left ,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318756 04/22/10 09:59  M Friend       Compton DAQ set to take pulser runs
318790 04/22/10 13:59  M Friend       Compton DAQ restored
318755 04/22/10 09:56  M Friend       Compton table moved
318754 04/22/10 09:42  apar           End_of_Parity_Run_3040__CODA_Config=CHInj2
318753 04/22/10 09:35  M Friend       Cavity flip script
318752 04/22/10 09:33  M Friend       Compton cavity locking
318751 04/22/10 09:32  apar           Start_Parity_Run_3040__CODA_Config=CHInj2_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Injector studies::PC pos (-3.2 mils,-9.2 mils),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318750 04/22/10 09:26  apar           End_of_Parity_Run_3039__CODA_Config=CHInj2
318749 04/22/10 09:23  apar           Start_Parity_Run_3039__CODA_Config=CHInj2_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Injector studies::Nominal PC zero position,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318748 04/22/10 09:21  apar           End_of_Parity_Run_3038__CODA_Config=CHInj2
318747 04/22/10 09:18  jwexler        Target moved to empty & Error in GUI handler
318746 04/22/10 09:13  apar           Start_Parity_Run_3038__CODA_Config=CHInj2_Run_type=Pedestal,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Injector studies,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318745 04/22/10 09:08  ZAFAR AHMED    Beam study starts.
318744 04/22/10 09:07  apar           End_of_Parity_Run_3036__CODA_Config=Prex
318743 04/22/10 09:04  M Friend       Compton epics reboot
318742 04/22/10 08:49  aserg          Wrong HWP info
318741 04/22/10 08:48  apar           Start_Parity_Run_3036__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318740 04/22/10 08:47  apar           End_of_Parity_Run_3035__CODA_Config=Prex
318739 04/22/10 08:37  jwexler        Compton cavity not locked
318738 04/22/10 08:15  aserg          Dithering
318737 04/22/10 08:05  Yoomin         Owl Shift Summary
318736 04/22/10 08:05  adaq           Beam Time Accounting
318735 04/22/10 07:57  apar           Start_Parity_Run_3035__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318734 04/22/10 07:56  apar           End_of_Parity_Run_3034__CODA_Config=Prex
318733 04/22/10 07:08  Yoomin         Compton Background Rate
318732 04/22/10 07:06  apar           Start_Parity_Run_3034__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318731 04/22/10 07:05  apar           End_of_Parity_Run_3033__CODA_Config=Prex
318730 04/22/10 06:46  Yoomin         HV trip
318729 04/22/10 06:31  Yoomin         Target strip chart
318728 04/22/10 06:26  Yoomin         Stripchart radiation/temperature/beam
318727 04/22/10 06:20  Yoomin         HV trip
318726 04/22/10 06:15  apar           Start_Parity_Run_3033__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318725 04/22/10 06:13  apar           End_of_Parity_Run_3032__CODA_Config=Prex
318724 04/22/10 06:10  Yoomin         Compton crash again
318723 04/22/10 05:30  Yoomin         Compton strip chart
318722 04/22/10 05:26  Hisham         Coda Crash
318721 04/22/10 05:24  apar           Start_Parity_Run_3032__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318720 04/22/10 05:19  apar           Start_Parity_Run_3031__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318719 04/22/10 05:17  apar           End_of_Parity_Run_3030__CODA_Config=Prex
318718 04/22/10 04:27  apar           Start_Parity_Run_3030__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318717 04/22/10 04:26  apar           End_of_Parity_Run_3029__CODA_Config=Prex
318716 04/22/10 03:35  apar           Start_Parity_Run_3029__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318715 04/22/10 03:34  apar           End_of_Parity_Run_3028__CODA_Config=Prex
318714 04/22/10 03:01  Yoomin         Compton recovered
318713 04/22/10 02:53  Yoomin         Compton DAQ crash
318712 04/22/10 02:44  apar           Start_Parity_Run_3028__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318711 04/22/10 02:43  apar           End_of_Parity_Run_3027__CODA_Config=Prex
318710 04/22/10 02:36  auto_snap      Temperatures snapshot
318709 04/22/10 02:36  auto_snap      Radiation and Ozone snapshot
318708 04/22/10 02:36  auto_snap      Hall A Tools snapshot
318707 04/22/10 02:36  auto_snap      Compton Polarimeter snapshot
318706 04/22/10 02:36  auto_snap      BigBox Magnet snapshot
318705 04/22/10 02:36  auto_snap      Beam Position and Current snapshot
318704 04/22/10 02:14  Yoomin         From Compton run 22604,  IHWP is OUT
318703 04/22/10 02:09  Hisham         CH scaler GUI
318702 04/22/10 02:01  Yoomin         Target Strip Chart
318701 04/22/10 02:00  Yoomin         Target Screen capture
318700 04/22/10 01:58  Yoomin         Please refer to ELOG 1520004
318699 04/22/10 01:53  apar           Start_Parity_Run_3027__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318698 04/22/10 01:53  Yoomin         dpp
318700  04/22/10 01:58  Yoomin         Please refer to ELOG 1520004
318697 04/22/10 01:52  apar           End_of_Parity_Run_3026__CODA_Config=Prex
318696 04/22/10 01:43  Yoomin         Radiation/Temperature/BPMs
318695 04/22/10 01:38  Yoomin         Hall A Tools
318694 04/22/10 01:33  Yoomin         HV trip
318693 04/22/10 01:02  apar           Start_Parity_Run_3026__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318692 04/22/10 01:00  Hisham         HAPPEX
318691 04/22/10 00:59  apar           Halfwave plate OUT, Slug 11
318690 04/22/10 00:57  apar           End_of_Parity_Run_3025__CODA_Config=Prex
318689 04/22/10 00:08  apar           Start_Parity_Run_3025__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318688 04/22/10 00:06  apar           End_of_Parity_Run_3024__CODA_Config=Prex
318687 04/22/10 00:06  adaq           Beam Time Accounting
318686 04/22/10 00:05  V. Sulkosky    Swing Shift Summary

Wednesday

318685 04/21/10 23:27  V. Sulkosky    dpp Excursion
318684 04/21/10 23:16  apar           Start_Parity_Run_3024__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318683 04/21/10 23:15  apar           End_of_Parity_Run_3023__CODA_Config=Prex
318682 04/21/10 23:12  adaq           shift crews
318681 04/21/10 23:08  N Muangma      empty plots
318680 04/21/10 22:26  apar           Start_Parity_Run_3023__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318679 04/21/10 22:25  Abdurahim      Compton cavity lock has been restored
318678 04/21/10 22:24  apar           End_of_Parity_Run_3022__CODA_Config=Prex
318677 04/21/10 22:18  gjin           hall a tools screen
318676 04/21/10 22:17  gjin           target screen
318675 04/21/10 22:00  V. Sulkosky    Compton HV Changed
318674 04/21/10 21:56  M Friend       Glitch in FADC Compton data
318673 04/21/10 21:35  apar           Start_Parity_Run_3022__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318672 04/21/10 21:34  apar           End_of_Parity_Run_3021__CODA_Config=Prex
318671 04/21/10 21:22  M Friend       Compton EPICS trigger rate change
318670 04/21/10 21:19  V. Sulkosky    Compton HV Change
318669 04/21/10 21:17  V. Sulkosky    Collimator Temperatures
318668 04/21/10 21:11  N Muangma      BCM signal jump
318667 04/21/10 20:44  apar           Start_Parity_Run_3021__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318666 04/21/10 20:43  apar           End_of_Parity_Run_3020__CODA_Config=Prex
318665 04/21/10 20:26  adaq           Compton HV Trips (1st Half)
318664 04/21/10 19:53  apar           Start_Parity_Run_3020__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318663 04/21/10 19:52  apar           End_of_Parity_Run_3019__CODA_Config=Prex
318662 04/21/10 19:51  N Muangma      dither plots
318661 04/21/10 19:19  V. Sulkosky    Radiation Strip Chart
318660 04/21/10 19:02  apar           Start_Parity_Run_3019__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318659 04/21/10 19:01  apar           End_of_Parity_Run_3018__CODA_Config=Prex
318658 04/21/10 18:57  N Muangma      double peak structure
318657 04/21/10 18:36  auto_snap      Temperatures snapshot
318656 04/21/10 18:36  auto_snap      Radiation and Ozone snapshot
318655 04/21/10 18:36  auto_snap      Hall A Tools snapshot
318654 04/21/10 18:36  auto_snap      Compton Polarimeter snapshot
318653 04/21/10 18:36  auto_snap      BigBox Magnet snapshot
318652 04/21/10 18:35  auto_snap      Beam Position and Current snapshot
318651 04/21/10 18:31  V. Sulkosky    Compton Stripchart
318650 04/21/10 18:11  apar           Start_Parity_Run_3018__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318649 04/21/10 18:10  apar           End_of_Parity_Run_3017__CODA_Config=Prex
318648 04/21/10 18:10  silwal         slug 9 transmission plots
318647 04/21/10 17:58  silwal         slug 6 transmission plots
318646 04/21/10 17:49  V. Sulkosky    Hall A Tools
318645 04/21/10 17:46  silwal         slug 7 transmission plots
318644 04/21/10 17:37  M Friend       Compton discriminator set high
318643 04/21/10 17:21  apar           Start_Parity_Run_3017__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318642 04/21/10 17:19  apar           End_of_Parity_Run_3016__CODA_Config=Prex
318641 04/21/10 17:05  M Friend       Compton rates with slits closed
318640 04/21/10 16:30  apar           Start_Parity_Run_3016__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318639 04/21/10 16:29  apar           End_of_Parity_Run_3015__CODA_Config=Prex
318638 04/21/10 16:03  adaq           Beam Time Accounting
318637 04/21/10 16:02  M Friend       Compton EPICS variable
318636 04/21/10 15:58  J. Zhang       HallA Tools Screen
318635 04/21/10 15:39  apar           Start_Parity_Run_3015__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318634 04/21/10 15:25  cusanno        Target Screenshots
318633 04/21/10 14:54  apar           End_of_Parity_Run_3014__CODA_Config=Prex
318632 04/21/10 14:52  silwal         slug 8 transmission plots
318631 04/21/10 14:49  apar           Start_Parity_Run_3014__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318630 04/21/10 14:45  apar           Start_Parity_Run_3013__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318629 04/21/10 13:41  apar           Start_Parity_Run_3011__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318628 04/21/10 13:40  apar           End_of_Parity_Run_3010__CODA_Config=Prex
318627 04/21/10 13:05  cusanno        Target Pressure when beam is back
318626 04/21/10 12:49  apar           Start_Parity_Run_3010__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318625 04/21/10 12:33  O.Glamazdin    Moller magnet has been filled
318624 04/21/10 12:28  cusanno        To do before rebooting target IOC
318623 04/21/10 11:53  J. Zhang       Control access
318622 04/21/10 11:51  J. Zhang       Beam was downdue to the injector problem
318621 04/21/10 11:47  adaq           Beam was not stable for run 3009
318620 04/21/10 11:29  apar           End_of_Parity_Run_3009__CODA_Config=Prex
318619 04/21/10 11:01  cusanno        Target Alarm Handler
318618 04/21/10 10:47  cusanno        Target Alarms as in entry 318236
318617 04/21/10 10:43  O.Glamazdin    Slug 10 for IHWP=IN
318616 04/21/10 10:42  apar           Start_Parity_Run_3009__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=SLUG 10 IHWP=IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318615 04/21/10 10:38  apar           Halfwave plate IN, Slug 10
318614 04/21/10 10:38  Jixie Zhang    Half Plate changed
318613 04/21/10 10:36  silwal         Dithering response changing
318612 04/21/10 10:35  auto_snap      Temperatures snapshot
318611 04/21/10 10:35  auto_snap      Radiation and Ozone snapshot
318610 04/21/10 10:35  auto_snap      Hall A Tools snapshot
318609 04/21/10 10:35  auto_snap      Compton Polarimeter snapshot
318608 04/21/10 10:35  auto_snap      BigBox Magnet snapshot
318607 04/21/10 10:35  auto_snap      Beam Position and Current snapshot
318606 04/21/10 10:33  cusanno        Target IOC
318605 04/21/10 10:28  apar           End_of_Parity_Run_3008__CODA_Config=Prex
318604 04/21/10 10:25  Abdurahim      Compton laser polarization scan (RIGHT) is completed
318603 04/21/10 10:15  O.Glamazdin    Radiation level in the Hall
318602 04/21/10 10:07  apar           Start_Parity_Run_3008__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318601 04/21/10 10:06  apar           End_of_Parity_Run_3007__CODA_Config=Prex
318600 04/21/10 09:55  O.Glamazdin    Dithering looks strange
318613 04/21/10 10:36  silwal         Dithering response changing
318599 04/21/10 09:23  J. Zhang       Day Shift Summary (8:00-16:00)
318598 04/21/10 09:12  apar           Start_Parity_Run_3007__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318597 04/21/10 09:11  apar           End_of_Parity_Run_3006__CODA_Config=Prex
318596 04/21/10 08:43  jixie          Compton HV(card11, channel 1) tripped
318595 04/21/10 08:23  adaq           Beam Time Accounting
318594 04/21/10 08:23  Abdurahim      Owl shift summary
318593 04/21/10 08:22  apar           Start_Parity_Run_3006__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318592 04/21/10 08:20  apar           End_of_Parity_Run_3005__CODA_Config=Prex
318591 04/21/10 07:54  Abdurahim      radiation level OK ?
318590 04/21/10 07:53  Abdurahim      Now dithering can be seen in BPM strip chart
318589 04/21/10 07:30  apar           Start_Parity_Run_3005__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318588 04/21/10 07:29  Abdurahim      Compton background is getting worse
318587 04/21/10 07:28  apar           End_of_Parity_Run_3004__CODA_Config=Prex
318586 04/21/10 07:25  Abdurahim      Target gui
318585 04/21/10 07:24  Abdurahim      Target temperature
318584 04/21/10 07:16  Abdurahim      Hall A general tools
318583 04/21/10 07:15  Abdurahim      BPM & BCM
318582 04/21/10 07:14  Abdurahim      radiation monitor
318581 04/21/10 07:13  Abdurahim      collimator temperatures
318580 04/21/10 06:52  Abdurahim      Compton PMT HV stripped
318579 04/21/10 06:45  Abdurahim      Dithering cannot be seen in the BPM strip chart
318578 04/21/10 06:44  Hisham         Dithering
318577 04/21/10 06:39  apar           Start_Parity_Run_3004__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318576 04/21/10 06:37  apar           End_of_Parity_Run_3003__CODA_Config=Prex
318575 04/21/10 05:47  apar           Start_Parity_Run_3003__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318574 04/21/10 05:45  apar           End_of_Parity_Run_3002__CODA_Config=Prex
318573 04/21/10 05:37  Abdurahim      Compton PMT HV trip
318572 04/21/10 05:23  Hisham         Blumi Signals Around
318571 04/21/10 05:06  Abdurahim      Target screen
318570 04/21/10 05:05  Abdurahim      Target temperature and pressure
318569 04/21/10 04:56  apar           Start_Parity_Run_3002__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318568 04/21/10 04:54  apar           End_of_Parity_Run_3001__CODA_Config=Prex
318567 04/21/10 04:30  Abdurahim      Compton strip chart during laser polarization scan
318566 04/21/10 04:05  apar           Start_Parity_Run_3001__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318565 04/21/10 04:03  apar           End_of_Parity_Run_3000__CODA_Config=Prex
318564 04/21/10 03:50  Abdurahim      Radiation level a concern
318563 04/21/10 03:13  apar           Start_Parity_Run_3000__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318562 04/21/10 03:12  apar           End_of_Parity_Run_2999__CODA_Config=Prex
318561 04/21/10 02:35  auto_snap      Temperatures snapshot
318560 04/21/10 02:35  auto_snap      Radiation and Ozone snapshot
318559 04/21/10 02:35  auto_snap      Hall A Tools snapshot
318558 04/21/10 02:35  auto_snap      Compton Polarimeter snapshot
318557 04/21/10 02:35  auto_snap      BigBox Magnet snapshot
318556 04/21/10 02:35  auto_snap      Beam Position and Current snapshot
318555 04/21/10 02:22  apar           Start_Parity_Run_2999__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318554 04/21/10 02:20  apar           End_of_Parity_Run_2998__CODA_Config=Prex
318553 04/21/10 01:44  Abdurahim      Hall A general tools
318552 04/21/10 01:42  Abdurahim      Target gui
318551 04/21/10 01:41  Abdurahim      Target temperature
318550 04/21/10 01:40  Abdurahim      radiation monitor
318549 04/21/10 01:39  Abdurahim      BCM and BPM strip chart
318548 04/21/10 01:38  Abdurahim      Collimator temperatures
318547 04/21/10 01:30  apar           Start_Parity_Run_2998__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318546 04/21/10 01:29  apar           End_of_Parity_Run_2997__CODA_Config=Prex
318545 04/21/10 01:01  M Friend       Compton HV to -1700
318544 04/21/10 00:39  apar           Start_Parity_Run_2997__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318543 04/21/10 00:36  apar           End_of_Parity_Run_2996__CODA_Config=Prex
318542 04/21/10 00:12  V. Sulkosky    Swing Shift Summary (better format)
318541 04/21/10 00:03  V. Sulkosky    Swing Shift Summary
318540 04/21/10 00:01  adaq           Beam Time Accounting

Tuesday

318539 04/20/10 23:57  V. Sulkosky    Collimator Temperatures
318538 04/20/10 23:46  apar           Start_Parity_Run_2996__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318537 04/20/10 23:43  apar           Start_Parity_Run_2995__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318536 04/20/10 23:39  apar           End_of_Parity_Run_2993__CODA_Config=Prex
318535 04/20/10 23:36  apar           Start_Parity_Run_2993__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=***IHWP OUT*** Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318534 04/20/10 23:34  apar           Halfwave plate OUT, Slug 9
318533 04/20/10 23:31  apar           End_of_Parity_Run_2992__CODA_Config=Prex
318532 04/20/10 23:28  apar           Start_Parity_Run_2992__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318531 04/20/10 23:28  V. Sulkosky    Re: Recalibrated BCMs
318530 04/20/10 23:26  apar           End_of_Parity_Run_2991__CODA_Config=Prex
318529 04/20/10 23:19  apar           Start_Parity_Run_2991__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318528 04/20/10 23:16  apar           End_of_Parity_Run_2990__CODA_Config=Prex
318527 04/20/10 23:13  V. Sulkosky    Left Q1 current tripped (TECHs)
318526 04/20/10 22:54  V. Sulkosky    Compton Stripchart
318525 04/20/10 22:54  mcanan         Target Screens
318524 04/20/10 22:41  V. Sulkosky    Compton GSO HV to -1.65 kV
318523 04/20/10 22:27  apar           Start_Parity_Run_2990__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production Run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318522 04/20/10 22:25  apar           End_of_Parity_Run_2989__CODA_Config=Prex
318521 04/20/10 22:23  R. Michaels    re: opmanual
318520 04/20/10 22:08  M Friend       Compton op-manual
318521  04/20/10 22:23  R. Michaels    re: opmanual
318519 04/20/10 21:54  M Friend       Compton rates with target in
318518 04/20/10 21:48  V. Sulkosky    Radiation Monitor Stripchart
318517 04/20/10 21:48  jhlee          screenshot for PANGUIN
318516 04/20/10 21:36  apar           Start_Parity_Run_2989__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production Run ,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318515 04/20/10 21:35  apar           End_of_Parity_Run_2988__CODA_Config=Prex
318514 04/20/10 21:28  apar           Start_Parity_Run_2988__CODA_Config=Prex_Run_type=Other,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318513 04/20/10 21:24  V. Sulkosky    Raster Check on Lead/Diamond
318512 04/20/10 21:22  a-onl          End_of_Run_27454
318511 04/20/10 21:21  V. Sulkosky    Rate on Lead/Diamond
318510 04/20/10 21:20  a-onl          Start_Run_27454,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=T5 Raster Check
318509 04/20/10 21:16  mcanan         Target Motion
318508 04/20/10 21:15  V. Sulkosky    Rate check on BeO
318507 04/20/10 21:09  M Friend       Compton rates after tune
318506 04/20/10 21:08  mcanan         Target Motion
318505 04/20/10 21:01  V. Sulkosky    Spot++ Check 17 x 7 Empty
318504 04/20/10 20:58  a-onl          End_of_Run_27453
318503 04/20/10 20:57  a-onl          Start_Run_27453,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=T8 pulser Raster Check
318502 04/20/10 20:56  apar           End_of_Parity_Run_2987__CODA_Config=Prex
318501 04/20/10 20:31  a-onl          End_of_Run_27452
318500 04/20/10 20:28  a-onl          Start_Run_27452,Run_type=Other,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=off,beam_current=18.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=T8 pulser during Compton Tuning
318499 04/20/10 20:26  a-onl          Start_Run_27451,Run_type=Other,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=off,beam_current=18.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=T8 pulser during Compton Tuning
318498 04/20/10 20:10  V. Sulkosky    Beam Restored to Hall A
318497 04/20/10 20:07  apar           Start_Parity_Run_2987__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318496 04/20/10 20:05  apar           End_of_Parity_Run_2986__CODA_Config=Prex
318495 04/20/10 19:19  jhlee          Run 2985 has "end fail"
318494 04/20/10 19:16  apar           Start_Parity_Run_2986__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318493 04/20/10 19:12  apar           End_of_Parity_Run_2985__CODA_Config=Prex
318495  04/20/10 19:19  jhlee          Run 2985 has "end fail"
318492 04/20/10 19:11  apar           End_of_Parity_Run_2985__CODA_Config=Prex
318491 04/20/10 19:00  V. Sulkosky    Hall A Tools
318490 04/20/10 18:51  V. Sulkosky    Left Q1 off and Regulators off
318489 04/20/10 18:40  V. Sulkosky    BCM Logger Updated
318488 04/20/10 18:35  auto_snap      Temperatures snapshot
318487 04/20/10 18:35  auto_snap      Radiation and Ozone snapshot
318486 04/20/10 18:34  auto_snap      Hall A Tools snapshot
318485 04/20/10 18:34  auto_snap      Compton Polarimeter snapshot
318484 04/20/10 18:34  auto_snap      BigBox Magnet snapshot
318483 04/20/10 18:34  auto_snap      Beam Position and Current snapshot
318482 04/20/10 18:29  jhlee          Roc 23 restarted
318481 04/20/10 18:29  R. Michaels    explanation of ROC23 errors
318480 04/20/10 18:21  apar           Start_Parity_Run_2985__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318479 04/20/10 18:08  apar           End_of_Parity_Run_2983__CODA_Config=Prex
318478 04/20/10 17:49  jhlee          the right error message at ROC 23 with run 2983 
318481  04/20/10 18:29  R. Michaels    explanation of ROC23 errors
318477 04/20/10 17:27  V. Sulkosky    Beam Ready but ...
318476 04/20/10 17:19  jwexler        ROC23 power cycled.
318478  04/20/10 17:49  jhlee          the right error message at ROC 23 with run 2983 
318475 04/20/10 17:18  apar           Start_Parity_Run_2983__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318474 04/20/10 17:07  apar           End_of_Parity_Run_2981__CODA_Config=Prex
318473 04/20/10 16:58  apar           Start_Parity_Run_2981__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318472 04/20/10 16:35  V. Sulkosky    South LINAC Vacuum Valve
318471 04/20/10 16:34  apar           Start_Parity_Run_2980__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318470 04/20/10 16:34  R. Michaels    swing shift activities
318469 04/20/10 16:33  apar           End_of_Parity_Run_2979__CODA_Config=Prex
318468 04/20/10 16:05  adaq           Beam Time Accounting
318467 04/20/10 16:03  Ole Hansen     Shift Summary
318470  04/20/10 16:34  R. Michaels    swing shift activities
318466 04/20/10 15:47  Fansler/Sega   RQ1/RQ2
318465 04/20/10 15:43  apar           Start_Parity_Run_2979__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318464 04/20/10 15:42  apar           Start_Parity_Run_2978__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318463 04/20/10 15:19  Ole Hansen     Cycling R-HRS Q2/Q3
318462 04/20/10 14:59  Ole Hansen     Septum ON
318461 04/20/10 14:37  A. Camsonne    GEM activities
318460 04/20/10 14:19  Ole Hansen     Access activities
318459 04/20/10 14:09  O.Glamazdin    Moller magnet has been filled
318458 04/20/10 13:59  A. Camsonne    GEM INFN HV
318457 04/20/10 13:58  Abdurahim      a new webcam for Compton quarter wave plate
318456 04/20/10 13:56  test           test
318451 04/20/10 13:42  a-onl          Start_Run_27450,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=INFN GEM check - T5 ( scintillator on source )
318450 04/20/10 10:38  M Friend       Compton epics reboot
318449 04/20/10 10:34  auto_snap      Temperatures snapshot
318448 04/20/10 10:34  auto_snap      Radiation and Ozone snapshot
318447 04/20/10 10:34  auto_snap      Hall A Tools snapshot
318446 04/20/10 10:34  auto_snap      Compton Polarimeter snapshot
318445 04/20/10 10:34  auto_snap      BigBox Magnet snapshot
318444 04/20/10 10:34  auto_snap      Beam Position and Current snapshot
318443 04/20/10 10:28  M Friend       Compton PMT base current
318442 04/20/10 10:22  apar           Start_Parity_Run_2977__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318441 04/20/10 10:22  R. Michaels    Compton DAQ tests, notes
318440 04/20/10 10:20  apar           End_of_Parity_Run_2976__CODA_Config=Prex
318439 04/20/10 09:55  R. Michaels    Compton DAQ configs
318441 04/20/10 10:22  R. Michaels    Compton DAQ tests, notes
318438 04/20/10 09:43  paschke        runs require re-prompting
318437 04/20/10 09:33  apar           Start_Parity_Run_2976__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318436 04/20/10 09:29  apar           End_of_Parity_Run_2975__CODA_Config=Prex
318435 04/20/10 09:08  Jixie Zhang    HV tripped: card11_channel1 (compton)
318434 04/20/10 08:38  apar           Start_Parity_Run_2975__CODA_Config=Prex_Run_type=Pedestal,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318433 04/20/10 08:36  apar           End_of_Parity_Run_2974__CODA_Config=Prex
318432 04/20/10 08:14  a-onl          End_of_Run_27449
318431 04/20/10 08:14  a-onl          End_of_Run_27446
318430 04/20/10 08:13  adaq           Beam Time Accounting
318429 04/20/10 07:56  ZAFAR AHMED    April 20 Owl Shift Summary
318428 04/20/10 07:47  apar           Start_Parity_Run_2974__CODA_Config=Prex_Run_type=Production,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=PREX detector pedestal run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318427 04/20/10 07:45  cusanno        Empty Target IN
318426 04/20/10 07:40  apar           End_of_Parity_Run_2973__CODA_Config=Prex
318425 04/20/10 07:40  cusanno        Target Screenshot
318424 04/20/10 07:23  apar           Start_Parity_Run_2973__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318423 04/20/10 07:22  apar           End_of_Parity_Run_2972__CODA_Config=Prex
318422 04/20/10 06:32  apar           Start_Parity_Run_2972__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318421 04/20/10 06:31  apar           End_of_Parity_Run_2971__CODA_Config=Prex
318420 04/20/10 06:22  ZAFAR AHMED    Production
318419 04/20/10 05:47  cusanno        Target Screenshots (contin'd)
318418 04/20/10 05:44  cusanno        Target Screenshot
318417 04/20/10 05:43  efuchey        Dithering ON
318416 04/20/10 05:41  apar           Start_Parity_Run_2971__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318415 04/20/10 05:38  ZAFAR AHMED    Beam recovery  5uA. Raster
318414 04/20/10 05:35  efuchey        other errata
318413 04/20/10 05:34  a-onl          Start_Run_27448,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318412 04/20/10 05:34  a-onl          End_of_Run_27448
318411 04/20/10 05:31  a-onl          End_of_Run_27447
318410 04/20/10 05:29  a-onl          Start_Run_27447,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318409 04/20/10 05:23  a-onl          Start_Run_27446,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318408 04/20/10 05:22  a-onl          End_of_Run_27445
318407 04/20/10 05:20  a-onl          Start_Run_27445,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318406 04/20/10 05:13  ZAFAR AHMED    Beam Recover. Not right raster at lead target 5nA.
318405 04/20/10 05:09  a-onl          End_of_Run_27444
318404 04/20/10 05:07  a-onl          Start_Run_27444,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318403 04/20/10 05:06  a-onl          End_of_Run_27443
318402 04/20/10 05:04  a-onl          Start_Run_27443,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318401 04/20/10 05:04  a-onl          End_of_Run_27442
318400 04/20/10 05:04  a-onl          End_of_Run_27435
318399 04/20/10 05:03  a-onl          Start_Run_27442,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318398 04/20/10 05:02  ZAFAR AHMED    Beam Recovery-5nA at target Pb Diamond 3
318397 04/20/10 04:58  cusanno        Lead Target IN
318396 04/20/10 04:56  apar           Start_Parity_Run_2970__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318395 04/20/10 04:55  apar           End_of_Parity_Run_2970__CODA_Config=Prex
318394 04/20/10 04:55  ZAFAR AHMED    Beam Recovery-5 nA-BeO
318393 04/20/10 04:51  apar           End_of_Parity_Run_2969__CODA_Config=Prex
318392 04/20/10 04:41  cusanno        BeO Target IN
318391 04/20/10 04:38  ZAFAR AHMED    spot++ Beam recovry 17x7 Raster
318390 04/20/10 04:36  a-onl          End_of_Run_27441
318389 04/20/10 04:34  a-onl          Start_Run_27441,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318388 04/20/10 04:33  ZAFAR AHMED    Spot++ Beam recovery
318387 04/20/10 04:33  efuchey        errata
318386 04/20/10 04:24  a-onl          End_of_Run_27440
318385 04/20/10 04:22  a-onl          Start_Run_27440,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318384 04/20/10 04:16  ZAFAR AHMED    Beam is back.
318383 04/20/10 04:13  cusanno        Target Screenshot
318382 04/20/10 04:02  apar           Start_Parity_Run_2969__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318381 04/20/10 04:01  apar           End_of_Parity_Run_2968__CODA_Config=Prex
318380 04/20/10 03:36  ZAFAR AHMED    Beam update
318379 04/20/10 03:11  apar           Start_Parity_Run_2968__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318378 04/20/10 03:09  apar           End_of_Parity_Run_2967__CODA_Config=Prex
318377 04/20/10 02:53  ZAFAR AHMED    No beam - Optics on call is called by MCC
318376 04/20/10 02:52  cusanno        Empty Target
318375 04/20/10 02:37  M Friend       Running the Compton DAQ tonight
318374 04/20/10 02:34  auto_snap      Temperatures snapshot
318373 04/20/10 02:34  auto_snap      Radiation and Ozone snapshot
318372 04/20/10 02:34  auto_snap      Hall A Tools snapshot
318371 04/20/10 02:34  auto_snap      Compton Polarimeter snapshot
318370 04/20/10 02:34  auto_snap      BigBox Magnet snapshot
318369 04/20/10 02:33  auto_snap      Beam Position and Current snapshot
318368 04/20/10 02:20  apar           Start_Parity_Run_2967__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318367 04/20/10 02:18  apar           End_of_Parity_Run_2966__CODA_Config=Prex
318366 04/20/10 02:04  ZAFAR AHMED    No beam for last one hour.
318365 04/20/10 01:29  apar           Start_Parity_Run_2966__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318364 04/20/10 01:27  apar           End_of_Parity_Run_2965__CODA_Config=Prex
318363 04/20/10 01:22  ZAFAR AHMED    No beam for last 20 minutes.
318362 04/20/10 01:16  apar           Start_Parity_Run_2965__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318361 04/20/10 01:14  apar           End_of_Parity_Run_2964__CODA_Config=Prex
318360 04/20/10 01:12  ZAFAR AHMED    No beam for last 10 minutes.
318359 04/20/10 01:10  apar           Start_Parity_Run_2964__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318358 04/20/10 01:09  apar           End_of_Parity_Run_2963__CODA_Config=Prex
318357 04/20/10 01:06  apar           Start_Parity_Run_2963__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318356 04/20/10 01:05  apar           End_of_Parity_Run_2962__CODA_Config=Prex
318355 04/20/10 01:00  ZAFAR AHMED    Spot++
318354 04/20/10 00:53  a-onl          End_of_Run_27439
318353 04/20/10 00:51  a-onl          Start_Run_27439,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318352 04/20/10 00:48  ZAFAR AHMED    Dithring coils at the beginning of owl shift.
318351 04/20/10 00:46  ZAFAR AJMED    Parity and fast feedback at the beginning fo owl shift
318350 04/20/10 00:44  apar           Start_Parity_Run_2962__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318349 04/20/10 00:43  apar           End_of_Parity_Run_2961__CODA_Config=Prex
318348 04/20/10 00:34  ZAFAR AHMED    Compton rates chart - start of owl shift
318347 04/20/10 00:29  ZAFAR AHMED    Upstream collimator Current charts Owl shift starts
318346 04/20/10 00:25  ZAFAR AHMED    Hall A Tools at the beginning of owl shift
318345 04/20/10 00:23  apar           Start_Parity_Run_2961__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318344 04/20/10 00:22  apar           End_of_Parity_Run_2960__CODA_Config=Prex
318343 04/20/10 00:14  adaq           Beam Time Accounting
318342 04/20/10 00:07  Megan F. / M   04/19/2010 Swing shift summary

Monday

318341 04/19/10 23:40  Yoomin         Target Stat during the beam recovery procedure
318340 04/19/10 23:32  apar           Start_Parity_Run_2960__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318339 04/19/10 23:29  Mindy          Hall-A general tool (beam recovery procedure)
318338 04/19/10 23:21  Yoomin         Target Pb Diamond #3
318337 04/19/10 23:17  Mindy          spot++ check (beam recovery procedure)
318336 04/19/10 23:17  a-onl          End_of_Run_27438
318335 04/19/10 23:16  a-onl          Start_Run_27438,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318334 04/19/10 23:09  a-onl          End_of_Run_27437
318333 04/19/10 23:07  a-onl          Start_Run_27437,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ beam recovery procedure (for short shut down)
318332 04/19/10 22:52  Bob/Kent       reset RHRS Q2, leave local mode (TECHS)
318331 04/19/10 22:52  Yoomin         Target motion to Empty
318330 04/19/10 22:43  Mindy          right-arm Q2 recycling
318329 04/19/10 22:33  apar           Start_Parity_Run_2959__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=coda test, no beam,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318328 04/19/10 22:33  apar           End_of_Parity_Run_2959__CODA_Config=Prex
318327 04/19/10 22:29  O.Glamazdin    Moller magnet has been filled
318326 04/19/10 22:09  Yoomin         JT Valve
318325 04/19/10 21:54  Yoomin         Target chart after IOC reboot
318324 04/19/10 21:52  Yoomin         Target IOC rebooted
318323 04/19/10 21:39  apar           End_of_Parity_Run_2957__CODA_Config=PrexNoQweak
318322 04/19/10 21:31  Yoomin         Target IOC Frozen?
318324  04/19/10 21:52  Yoomin         Target IOC rebooted
318325 04/19/10 21:54  Yoomin         Target chart after IOC reboot
318321 04/19/10 21:04  apar           Start_Parity_Run_2957__CODA_Config=PrexNoQweak_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318320 04/19/10 21:01  apar           End_of_Parity_Run_2956__CODA_Config=PrexNoQweak
318319 04/19/10 20:20  Yoomin         Target Screen Capture - CryoStat
318318 04/19/10 20:19  Yoomin         Target Screen Capture
318317 04/19/10 20:15  R. Michaels    suggest NO change to JT valve
318316 04/19/10 20:11  apar           Start_Parity_Run_2956__CODA_Config=PrexNoQweak_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318315 04/19/10 19:57  O.Glamazdin    PREX CODA crush
318314 04/19/10 19:54  apar           End_of_Parity_Run_2953__CODA_Config=PrexNoQweak
318313 04/19/10 19:53  apar           End_of_Parity_Run_2953__CODA_Config=PrexNoQweak
318312 04/19/10 19:41  Ole Hansen     New 2TB disks
318311 04/19/10 19:36  paschke        DAQ hang; ROC31 doesn't boot, moved to PrexNoQweak configuration
318310 04/19/10 19:33  apar           Start_Parity_Run_2953__CODA_Config=PrexNoQweak_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318309 04/19/10 18:40  apar           Start_Parity_Run_2952__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318308 04/19/10 18:38  apar           End_of_Parity_Run_2951__CODA_Config=Prex
318307 04/19/10 18:33  auto_snap      Temperatures snapshot
318306 04/19/10 18:33  auto_snap      Radiation and Ozone snapshot
318305 04/19/10 18:33  auto_snap      Hall A Tools snapshot
318304 04/19/10 18:33  auto_snap      Compton Polarimeter snapshot
318303 04/19/10 18:33  auto_snap      BigBox Magnet snapshot
318302 04/19/10 18:33  auto_snap      Beam Position and Current snapshot
318301 04/19/10 17:49  apar           Start_Parity_Run_2951__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318300 04/19/10 17:48  apar           End_of_Parity_Run_2950__CODA_Config=Prex
318299 04/19/10 17:40  M Friend       Momentary left magnet alarm
318298 04/19/10 17:37  Yoomin         JT2 closed one step more
318297 04/19/10 17:14  dalton         batt2 corrected in past datamaps to run 2800
318296 04/19/10 17:14  paschke        Feedback PITA slope
318295 04/19/10 17:04  dalton         lobeam changed to 90000 channels on bcm3
318294 04/19/10 16:59  paschke        correction: pita slope from injector studies at different RHWP position
318293 04/19/10 16:59  apar           Start_Parity_Run_2950__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318292 04/19/10 16:58  mercado        Added batt variables to db files for crosstalk tests
318291 04/19/10 16:57  apar           End_of_Parity_Run_2949__CODA_Config=Prex
318290 04/19/10 16:49  silwal         dithering response much worse after quad changes for compton
318289 04/19/10 16:26  Yoomin         JT valve one step closed
318317  04/19/10 20:15  R. Michaels    suggest NO change to JT valve
318288 04/19/10 16:17  M Friend       Dithering is ON
318287 04/19/10 16:07  apar           Start_Parity_Run_2949__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318286 04/19/10 16:07  Abdurahim      Target temperature
318285 04/19/10 16:05  apar           End_of_Parity_Run_2948__CODA_Config=Prex
318284 04/19/10 16:02  adaq           Beam Time Accounting
318283 04/19/10 15:15  apar           Start_Parity_Run_2948__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318282 04/19/10 15:14  apar           End_of_Parity_Run_2947__CODA_Config=Prex
318281 04/19/10 14:59  mcnulty        Quartz det pulse height dists before and after s0 removal
318280 04/19/10 14:24  apar           Start_Parity_Run_2947__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318279 04/19/10 14:23  apar           End_of_Parity_Run_2946__CODA_Config=Prex
318278 04/19/10 13:51  M Friend       Compton photon detector can see the target
318277 04/19/10 13:44  aserg          spot++ after compton
318276 04/19/10 13:34  apar           Start_Parity_Run_2946__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318275 04/19/10 13:31  a-onl          End_of_Run_27436
318274 04/19/10 13:28  a-onl          Start_Run_27436,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
318273 04/19/10 13:24  a-onl          Start_Run_27435,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
318272 04/19/10 13:20  Abdurahim      Target -> Pb Diamond#3
318271 04/19/10 13:10  Abdurahim      target -> Empty
318270 04/19/10 13:06  apar           End_of_Parity_Run_2945__CODA_Config=Prex
318269 04/19/10 13:03  apar           Start_Parity_Run_2945__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production, HWP IN,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318268 04/19/10 13:00  aserg          changing in flipper
318267 04/19/10 12:49  Abdurahim      Target -> Pb Diamond #3
318266 04/19/10 12:46  M Friend       Compton interaction point
319898 04/27/10 18:52  M Friend       Compton vertical scan
318265 04/19/10 12:44  M Friend       Compton rates after tune
318264 04/19/10 12:16  Ole Hansen     Computer work planned
318312  04/19/10 19:41  Ole Hansen     New 2TB disks
318263 04/19/10 12:14  R. Michaels    adaql10 problems
318262 04/19/10 12:11  mercado        adaql10 down
318264  04/19/10 12:16  Ole Hansen     Computer work planned
318261 04/19/10 11:49  apar           End_of_Parity_Run_2944__CODA_Config=Prex
318260 04/19/10 11:48  apar           Start_Parity_Run_2944__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
318259 04/19/10 11:37  M Friend       Compton tune started
318258 04/19/10 11:24  aserg          DITHERING off
318288 04/19/10 16:17  M Friend       Dithering is ON
318257 04/19/10 11:11  Abdurahim      Target -> Empty
318256 04/19/10 11:06  apar           End_of_Parity_Run_2943__CODA_Config=Prex
318255 04/19/10 11:05  apar           Start_Parity_Run_2943__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318254 04/19/10 11:04  apar           End_of_Parity_Run_2942__CODA_Config=Prex
318253 04/19/10 10:44  mercado        LUMI 1 HV was off.
318252 04/19/10 10:33  auto_snap      Temperatures snapshot
318251 04/19/10 10:33  auto_snap      Radiation and Ozone snapshot
318250 04/19/10 10:33  auto_snap      Hall A Tools snapshot
318249 04/19/10 10:33  auto_snap      Compton Polarimeter snapshot
318248 04/19/10 10:33  auto_snap      BigBox Magnet snapshot
318247 04/19/10 10:33  auto_snap      Beam Position and Current snapshot
318246 04/19/10 10:19  Abdurahim      Target strip chart
318245 04/19/10 10:15  apar           Start_Parity_Run_2942__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318244 04/19/10 10:13  R. Michaels    reboot iocha11 and 22
318243 04/19/10 10:13  Abdurahim      Target motion
318242 04/19/10 10:04  mercado        Added battery to datamap
318295  04/19/10 17:04  dalton         lobeam changed to 90000 channels on bcm3
318297  04/19/10 17:14  dalton         batt2 corrected in past datamaps to run 2800
318241 04/19/10 09:56  apar           Start_Parity_Run_2941__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318240 04/19/10 09:56  apar           End_of_Parity_Run_2941__CODA_Config=Prex
318239 04/19/10 09:54  apar           End_of_Parity_Run_2940__CODA_Config=Prex
318238 04/19/10 09:04  apar           Start_Parity_Run_2940__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318237 04/19/10 09:03  apar           End_of_Parity_Run_2939__CODA_Config=Prex
318236 04/19/10 08:48  Abdurahim      target
318235 04/19/10 08:14  apar           Start_Parity_Run_2939__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318234 04/19/10 08:13  apar           End_of_Parity_Run_2938__CODA_Config=Prex
318233 04/19/10 08:00  adaq           Beam Time Accounting
318232 04/19/10 08:00  ZAFAR AHMED    04/19/10 Owl Shift Summary
318231 04/19/10 07:40  cusanno        Target Temperature and Alarm Handler
318230 04/19/10 07:31  cusanno        Target IOC rebooted
318229 04/19/10 07:25  cusanno        Target Alarm Handler frozen?
318230 04/19/10 07:31  cusanno        Target IOC rebooted
318231 04/19/10 07:40  cusanno        Target Temperature and Alarm Handler
318228 04/19/10 07:23  apar           Start_Parity_Run_2938__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318227 04/19/10 07:22  apar           End_of_Parity_Run_2937__CODA_Config=Prex
318226 04/19/10 07:15  cusanno        LeCroy HV Crate rebooted 
318225 04/19/10 07:04  ZAFAR AHMED    Hall A tools
318224 04/19/10 06:59  ZAFAR AHMED    Lecroy HV is frozen
318223 04/19/10 06:42  ZAFAR AHMED    spot++
318222 04/19/10 06:37  a-onl          End_of_Run_27434
318221 04/19/10 06:36  a-onl          Start_Run_27434,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
318220 04/19/10 06:32  apar           Start_Parity_Run_2937__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318219 04/19/10 06:30  apar           End_of_Parity_Run_2936__CODA_Config=Prex
318218 04/19/10 06:08  cusanno        Target Pressure Readout
318217 04/19/10 06:03  apar           Start_Parity_Run_2936__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318216 04/19/10 06:02  apar           End_of_Parity_Run_2935__CODA_Config=Prex
318215 04/19/10 06:00  cusanno        Target Screenshot
318214 04/19/10 05:12  apar           Start_Parity_Run_2935__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318213 04/19/10 05:11  apar           End_of_Parity_Run_2934__CODA_Config=Prex
318212 04/19/10 04:21  apar           Start_Parity_Run_2934__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318211 04/19/10 04:20  apar           End_of_Parity_Run_2933__CODA_Config=Prex
318210 04/19/10 03:44  ZAFAR AHMED    Record Runs of PREx
318209 04/19/10 03:31  apar           Start_Parity_Run_2933__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318208 04/19/10 03:28  apar           Start_Parity_Run_2932__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318207 04/19/10 03:24  apar           End_of_Parity_Run_2931__CODA_Config=Prex
318206 04/19/10 03:11  cusanno        Target Screenshots
318205 04/19/10 02:34  apar           Start_Parity_Run_2931__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318204 04/19/10 02:33  apar           End_of_Parity_Run_2930__CODA_Config=Prex
318203 04/19/10 02:33  auto_snap      Temperatures snapshot
318202 04/19/10 02:33  auto_snap      Radiation and Ozone snapshot
318201 04/19/10 02:33  auto_snap      Hall A Tools snapshot
318200 04/19/10 02:33  auto_snap      Compton Polarimeter snapshot
318199 04/19/10 02:32  auto_snap      BigBox Magnet snapshot
318198 04/19/10 02:32  auto_snap      Beam Position and Current snapshot
318197 04/19/10 02:25  ZAFAR AHMED    No beam drop for last two hours
318196 04/19/10 01:53  ZAFAR AHMED    No beam drop for last one hour
318195 04/19/10 01:43  apar           Start_Parity_Run_2930__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318194 04/19/10 01:39  apar           End_of_Parity_Run_2929__CODA_Config=Prex
318193 04/19/10 01:24  efuchey        Lack of disk space for data replay again -> Solved by logging in and out
318192 04/19/10 01:06  silwal         PAN multiplet analyzer sick or bmw variables not setup correctly??
318191 04/19/10 01:03  efuchey        Lack of disk space for data replay again
318190 04/19/10 00:56  ZAFAR AHMED    HACB_HPE1313A = 4.908
318189 04/19/10 00:55  cusanno        target temperature 21.5 K
318188 04/19/10 00:53  ZAFAR AHMED    HACB_HPE1313A = 4.88818
318187 04/19/10 00:51  ZAFAR AHMED    HAC_HPE1313A is 4.87842
318186 04/19/10 00:49  apar           Start_Parity_Run_2929__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318185 04/19/10 00:48  apar           End_of_Parity_Run_2928__CODA_Config=Prex
318184 04/19/10 00:47  dalton         lobeam extent lengthened for runs 2901-2928
318183 04/19/10 00:46  ZAFAR AHMED    HACB_HPE1313A close to 5 Watts
318182 04/19/10 00:16  adaq           Beam Time Accounting
318181 04/19/10 00:12  apar           Halfwave plate OUT, Slug 7
318180 04/19/10 00:04  M Friend       Compton background rates
318179 04/19/10 00:02  LeRose         Shift Summary
318178 04/19/10 00:00  silwal         added 'Scaler_bad' cuts to .db files for run 2815-2926

Sunday

318177 04/18/10 23:59  apar           Start_Parity_Run_2928__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production, HW plate "OUT",dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318176 04/18/10 23:56  LeRose         IHWP OUT
318175 04/18/10 23:56  Yoomin         Target Chart
318174 04/18/10 23:54  apar           End_of_Parity_Run_2927__CODA_Config=Prex
318173 04/18/10 23:21  LeRose         Production running resumed
318172 04/18/10 23:09  apar           Start_Parity_Run_2927__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production start,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318171 04/18/10 23:05  mcnulty        raster current scan
318170 04/18/10 23:05  a-onl          End_of_Run_27433
318169 04/18/10 23:04  a-onl          Start_Run_27433,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.1,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=raster current check
318168 04/18/10 22:58  Yoomin         Target to Pb Diamond #3
318167 04/18/10 22:57  a-onl          End_of_Run_27432
318166 04/18/10 22:53  Yoomin         Target BeO
318165 04/18/10 22:48  mcnulty        raster size check
318164 04/18/10 22:47  a-onl          Start_Run_27432,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=raster size check
318163 04/18/10 22:46  a-onl          End_of_Run_6724
318162 04/18/10 22:35  Yoomin         Empty target
318161 04/18/10 22:20  dalton         Current ramp-up rate less than half after Moller
318184  04/19/10 00:47  dalton         lobeam extent lengthened for runs 2901-2928
318160 04/18/10 22:17  silwal         Added 'Scaler_bad' cut to the .db files
318178  04/19/10 00:00  silwal         added 'Scaler_bad' cuts to .db files for run 2815-2926
318159 04/18/10 22:02  mcnulty        VDCs, upper scint turned off
318158 04/18/10 21:54  mcnulty        called for access to switch to integrating mode
318157 04/18/10 21:54  jwexler        Right A_T detector moved.
318156 04/18/10 21:50  a-onl          Start_Run_6724,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment check (dx_at=+2cm)
318155 04/18/10 21:47  a-onl          End_of_Run_6723
318154 04/18/10 21:45  mcnulty        Rarm Quartz y alignment check after s0 removal
318153 04/18/10 21:44  mcnulty        Rarm Quartz x alignment after s0 removal
318152 04/18/10 21:42  mcnulty        Quartz y alignment check after s0 removal
318151 04/18/10 21:41  mcnulty        Quartz x alignment check after s0 removal
318150 04/18/10 21:39  a-onl          Start_Run_6723,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment check (dx_at=+3cm)
318149 04/18/10 21:38  a-onl          End_of_Run_6722
318148 04/18/10 21:38  a-onl          End_of_Run_27427
318147 04/18/10 21:29  a-onl          Start_Run_27431,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment check
318146 04/18/10 21:29  a-onl          Start_Run_6722,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment check
318145 04/18/10 21:29  a-onl          End_of_Run_27430
318144 04/18/10 21:28  a-onl          Start_Run_27430,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment check
318143 04/18/10 21:27  a-onl          End_of_Run_27429
318142 04/18/10 21:27  a-onl          End_of_Run_6721
318141 04/18/10 21:26  a-onl          Start_Run_27429,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment check
318140 04/18/10 21:25  a-onl          Start_Run_6721,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment check
318139 04/18/10 21:25  a-onl          End_of_Run_27428
318138 04/18/10 21:19  Yoomin         Target to THIN Carbon
318137 04/18/10 21:17  mcnulty        spot check
318136 04/18/10 21:14  a-onl          Start_Run_27428,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot check
318135 04/18/10 21:00  mcnulty        Access activity (s0's out)
318134 04/18/10 20:56  Yoomin         Target to Empty
318133 04/18/10 20:48  LeRose         Septum is On
318132 04/18/10 19:05  R. Michaels    tentative conclusions: Qsq, S0, etc
318131 04/18/10 19:03  mcnulty        Q2 for s0 trigger at lower current
318130 04/18/10 18:57  R. Michaels    ask for access
318129 04/18/10 18:51  benesch        optics results of Compton background test 1438-1455
318128 04/18/10 18:49  R. Michaels    Qsq measurements, better now
318127 04/18/10 18:48  a-onl          End_of_Run_6720
318126 04/18/10 18:48  a-onl          End_of_Run_27422
318125 04/18/10 18:46  mcnulty        Q2 for s0 trigger
318124 04/18/10 18:45  a-onl          Start_Run_27427,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 12.5 lower rates, T5 only
318123 04/18/10 18:45  a-onl          Start_Run_6720,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 12.5 lower rates, T5 only
318122 04/18/10 18:45  a-onl          End_of_Run_27426
318120 04/18/10 18:41  a-onl          Start_Run_6719,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 12.5 lower rates, T1 only
318119 04/18/10 18:40  a-onl          Start_Run_27426,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 12.5 lower rates, T1 only
318118 04/18/10 18:35  a-onl          End_of_Run_27425
318117 04/18/10 18:35  a-onl          End_of_Run_6718
318116 04/18/10 18:33  a-onl          Start_Run_27425,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 15. higher rates, T1 only
318115 04/18/10 18:32  a-onl          Start_Run_6718,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 15 higher rates, T1 only
318114 04/18/10 18:32  auto_snap      Temperatures snapshot
318113 04/18/10 18:32  auto_snap      Radiation and Ozone snapshot
318112 04/18/10 18:32  auto_snap      Hall A Tools snapshot
318111 04/18/10 18:32  auto_snap      Compton Polarimeter snapshot
318110 04/18/10 18:32  auto_snap      BigBox Magnet snapshot
318109 04/18/10 18:32  auto_snap      Beam Position and Current snapshot
318108 04/18/10 18:32  a-onl          End_of_Run_6717
318107 04/18/10 18:32  a-onl          End_of_Run_27424
318106 04/18/10 18:28  a-onl          Start_Run_27424,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 15. higher rates, T5 only
318105 04/18/10 18:28  a-onl          Start_Run_6717,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 15 higher rates, T5 only
318104 04/18/10 18:28  mcnulty        Q2 for Upper Scint trigger
318125 04/18/10 18:46  mcnulty        Q2 for s0 trigger
318103 04/18/10 18:25  Yoomin         Target at Pb Diamond #3
318102 04/18/10 18:24  a-onl          End_of_Run_27423
318100 04/18/10 18:23  R. Michaels    correction: Pb/diamond
318099 04/18/10 18:23  R. Michaels    correction: Pb/diamond target #3
318098 04/18/10 18:16  A. Camsonne    GEM HV off
318097 04/18/10 18:15  a-onl          Start_Run_6716,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 13 ps5=infty
318096 04/18/10 18:15  a-onl          Start_Run_27423,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 13 ps5 = infty
318095 04/18/10 18:15  Abdurahim      Compton Fiber Amp turned back on
318094 04/18/10 18:14  a-onl          End_of_Run_6715
318093 04/18/10 18:13  R. Michaels    Podd database problems
318092 04/18/10 18:12  mcnulty        L and Rarm Q2 plots, upper Scint trigger (quick and dirty)
318091 04/18/10 18:09  a-onl          Start_Run_6715,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 13 ps1=infty
318090 04/18/10 18:09  a-onl          Start_Run_27422,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 13 ps1 = infty
318099  04/18/10 18:23  R. Michaels    correction: Pb/diamond target #3
318089 04/18/10 18:08  a-onl          Start_Run_27419,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318088 04/18/10 18:08  a-onl          End_of_Run_27421
318086 04/18/10 18:08  mcnulty        Larm alignment plots for thick Lead
318085 04/18/10 18:06  mcnulty        Rarm alignment on Thick Pb
318084 04/18/10 18:00  a-onl          Start_Run_6714,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 13
318083 04/18/10 18:00  a-onl          Start_Run_27421,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 13
318100  04/18/10 18:23  R. Michaels    correction: Pb/diamond
318082 04/18/10 17:56  mcnulty        quartz counting mode ADC spectra
318081 04/18/10 17:53  R. Michaels    rates with super thin C12
318080 04/18/10 17:52  A. Camsonne    GEM HV lowered to 4100 V
318079 04/18/10 17:51  a-onl          End_of_Run_27420
318078 04/18/10 17:51  a-onl          End_of_Run_6713
318077 04/18/10 17:49  A. Camsonne    GEM INFN top chamber
318076 04/18/10 17:46  a-onl          Start_Run_6713,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 15
318075 04/18/10 17:46  a-onl          Start_Run_27420,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser 65, slit 15
318074 04/18/10 17:45  a-onl          End_of_Run_6712
318073 04/18/10 17:45  a-onl          End_of_Run_27419
318072 04/18/10 17:45  a-onl          Start_Run_6712,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318071 04/18/10 17:42  a-onl          End_of_Run_27418
318070 04/18/10 17:42  a-onl          End_of_Run_27416
318069 04/18/10 17:42  a-onl          Start_Run_27418,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318068 04/18/10 17:41  a-onl          End_of_Run_6711
318067 04/18/10 17:38  a-onl          Start_Run_6711,Run_type=Qsq,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318065 04/18/10 17:38  a-onl          End_of_Run_27417
318064 04/18/10 17:36  R. Michaels    had septum off (oops !)
318063 04/18/10 17:34  M Friend       Compton epics reboot
318062 04/18/10 17:31  Yoomin         Target at THIN Carbon
318061 04/18/10 17:29  adaq           Beam Time Accounting
318060 04/18/10 17:26  R. Michaels    Qsq measurements, part 1
318059 04/18/10 17:26  a-onl          End_of_Run_6710
318058 04/18/10 17:16  a-onl          Start_Run_6710,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser = 80, slit = 15
318057 04/18/10 17:16  a-onl          Start_Run_27416,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=laser = 80
318056 04/18/10 17:11  a-onl          End_of_Run_27415
318055 04/18/10 17:11  a-onl          End_of_Run_6709
318054 04/18/10 17:05  a-onl          Start_Run_6709,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318053 04/18/10 17:05  a-onl          Start_Run_27415,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318052 04/18/10 17:00  a-onl          End_of_Run_27414
318051 04/18/10 17:00  a-onl          End_of_Run_6708
318050 04/18/10 16:54  a-onl          Start_Run_27414,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=raster 17 x 7 (MCC)
318049 04/18/10 16:54  a-onl          Start_Run_6708,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318048 04/18/10 16:54  a-onl          End_of_Run_6707
318047 04/18/10 16:51  a-onl          Start_Run_6707,Run_type=Qsq,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318046 04/18/10 16:49  R. Michaels    strange background with beam off
318045 04/18/10 16:45  Yoomin         Target moved to Pb Diamond #3
318044 04/18/10 16:40  R. Michaels    establishing few-nA on BeO
318043 04/18/10 16:26  R. Michaels    visual BeO check
318042 04/18/10 16:15  Yoomin         Target moved to BeO
318041 04/18/10 16:10  a-onl          End_of_Run_27412
318040 04/18/10 16:09  a-onl          Start_Run_27412,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=raster 17 x 7 (MCC)
318039 04/18/10 16:09  R. Michaels    spot++ checks.
318038 04/18/10 16:05  a-onl          End_of_Run_6706
318037 04/18/10 16:04  M Friend       Compton rates during quad changes
318036 04/18/10 15:59  a-onl          Start_Run_6706,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=20,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318035 04/18/10 15:58  a-onl          Start_Run_27411,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=raster 15 x 7 (MCC)
318034 04/18/10 15:48  a-onl          End_of_Run_27410
318033 04/18/10 15:48  a-onl          End_of_Run_6705
318032 04/18/10 15:44  R. Michaels    HRS DAQs revived
318031 04/18/10 15:43  a-onl          Start_Run_6705,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=20,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318030 04/18/10 15:43  a-onl          Start_Run_27410,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=520,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
318029 04/18/10 15:24  A. Camsonne    Beamline HV crate power cycled
318028 04/18/10 15:21  ZAFAR AHMED    Integrating to counting mode
318027 04/18/10 15:04  A. Camsonne    GEM HV on
318026 04/18/10 14:37  Mindy          turn the septum off
318025 04/18/10 14:33  hisham         Dithering off
318024 04/18/10 14:32  Mindy          move the target to the empty
318023 04/18/10 14:27  apar           End_of_Parity_Run_2926__CODA_Config=Prex
318022 04/18/10 14:16  Jack           Gas leak in BigBite ethanol bubbler
318021 04/18/10 14:14  apar           Start_Parity_Run_2926__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318020 04/18/10 14:12  apar           End_of_Parity_Run_2925__CODA_Config=Prex
318019 04/18/10 13:22  apar           Start_Parity_Run_2925__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318018 04/18/10 13:18  apar           End_of_Parity_Run_2924__CODA_Config=Prex
318017 04/18/10 13:13  Mindy          gas leak warning
318022  04/18/10 14:16  Jack           Gas leak in BigBite ethanol bubbler
318016 04/18/10 12:47  mercado        Detector Voltages Updated on Opsmanual
318015 04/18/10 12:31  mercado        New Detector Voltages for PREX detectors
318014 04/18/10 12:28  apar           Start_Parity_Run_2924__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318013 04/18/10 12:26  apar           End_of_Parity_Run_2923__CODA_Config=Prex
318012 04/18/10 12:22  apar           Start_Parity_Run_2923__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318011 04/18/10 12:21  apar           End_of_Parity_Run_2922__CODA_Config=Prex
318010 04/18/10 12:20  mercado        Detector Voltages Before Tweak
318016 04/18/10 12:47  mercado        Detector Voltages Updated on Opsmanual
318009 04/18/10 12:18  Mindy          nobody knows why right-arm HV was turned off
318008 04/18/10 12:15  apar           Start_Parity_Run_2922__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
318007 04/18/10 12:15  mercado        LUMI Pedestals - Run 2913
318006 04/18/10 12:13  apar           End_of_Parity_Run_2921__CODA_Config=Prex
318005 04/18/10 12:06  hisham         Dithering
318004 04/18/10 12:02  Mindy          reboot ROC23 in the CH to turn dithering on
318003 04/18/10 12:01  mercado        Looking at LUMI Saturation
318002 04/18/10 11:59  hisham         Right arm detector output
318001 04/18/10 11:59  Guy Ron        Target Vacuum not Logged
318000 04/18/10 11:55  M. Jen         reboot right-arm HV setting
318009  04/18/10 12:18  Mindy          nobody knows why right-arm HV was turned off
317999 04/18/10 11:22  apar           Start_Parity_Run_2921__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317998 04/18/10 11:14  apar           End_of_Parity_Run_2919__CODA_Config=Prex
317997 04/18/10 11:14  apar           Start_Parity_Run_2919__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317996 04/18/10 10:38  apar           Start_Parity_Run_2917__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317995 04/18/10 10:32  auto_snap      Temperatures snapshot
317994 04/18/10 10:32  auto_snap      Radiation and Ozone snapshot
317993 04/18/10 10:32  auto_snap      Hall A Tools snapshot
317992 04/18/10 10:32  auto_snap      Compton Polarimeter snapshot
317991 04/18/10 10:32  auto_snap      BigBox Magnet snapshot
317990 04/18/10 10:32  auto_snap      Beam Position and Current snapshot
317989 04/18/10 10:28  D. Parno       LHRS DAQ Problems
317988 04/18/10 09:51  apar           Start_Parity_Run_2916__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317987 04/18/10 09:49  apar           End_of_Parity_Run_2915__CODA_Config=Prex
317986 04/18/10 09:46  paschke        IHWP flip procedure, Run 2908 charge asymmetry
317985 04/18/10 08:59  apar           Start_Parity_Run_2915__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317984 04/18/10 08:57  apar           End_of_Parity_Run_2914__CODA_Config=Prex
317983 04/18/10 08:30  R. Michaels    disk cleanup
317982 04/18/10 08:29  Mindy          Target
317981 04/18/10 08:13  efuchey        Target temperature
318218 04/19/10 06:08  cusanno        Target Pressure Readout
317980 04/18/10 08:07  apar           Start_Parity_Run_2914__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317979 04/18/10 08:05  apar           End_of_Parity_Run_2913__CODA_Config=Prex
317978 04/18/10 08:03  cusanno        Owl Shift Summary
317977 04/18/10 08:03  adaq           Beam Time Accounting
317976 04/18/10 07:57  efuchey        Targets GUI screenshots
317975 04/18/10 07:17  Guy Ron        Correction for new location of files
317974 04/18/10 07:15  apar           Start_Parity_Run_2913__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317973 04/18/10 07:14  apar           End_of_Parity_Run_2912__CODA_Config=Prex
317972 04/18/10 07:11  Guy Ron        Dirty hack for disk space problem
317975  04/18/10 07:17  Guy Ron        Correction for new location of files
317983  04/18/10 08:30  R. Michaels    disk cleanup
317971 04/18/10 06:48  cusanno        adaql3 disk full with replayed data
317970 04/18/10 06:31  cusanno        Beam back
317969 04/18/10 06:29  apar           Start_Parity_Run_2912__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317968 04/18/10 06:23  cusanno        Beam OFF
317967 04/18/10 06:22  apar           End_of_Parity_Run_2911__CODA_Config=Prex
317966 04/18/10 06:11  cusanno        again problem with data replay
317972  04/18/10 07:11  Guy Ron        Dirty hack for disk space problem
317965 04/18/10 05:54  cusanno        Data replay back
317964 04/18/10 05:46  cusanno        Compton HV OFF
317963 04/18/10 05:32  apar           Start_Parity_Run_2911__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317962 04/18/10 05:26  apar           End_of_Parity_Run_2910__CODA_Config=Prex
317961 04/18/10 05:23  cusanno        Hall A Beamline alarm
317960 04/18/10 05:20  apar           Start_Parity_Run_2910__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317959 04/18/10 05:17  apar           End_of_Parity_Run_2909__CODA_Config=Prex
317958 04/18/10 04:52  cusanno        Problems with data replay
317957 04/18/10 04:27  apar           Start_Parity_Run_2909__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317956 04/18/10 04:26  apar           End_of_Parity_Run_2908__CODA_Config=Prex
317955 04/18/10 04:14  cusanno        Hall A Tools screenshot
317954 04/18/10 04:13  cusanno        Temperature and radiation screenshots
317953 04/18/10 04:03  cusanno        target screenshot
317952 04/18/10 03:36  apar           Start_Parity_Run_2908__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317951 04/18/10 03:33  cusanno        IHWP IN
317986  04/18/10 09:46  paschke        IHWP flip procedure, Run 2908 charge asymmetry
317950 04/18/10 03:31  apar           End_of_Parity_Run_2907__CODA_Config=Prex
317949 04/18/10 03:07  apar           Start_Parity_Run_2907__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317948 04/18/10 03:06  apar           End_of_Parity_Run_2906__CODA_Config=Prex
317947 04/18/10 02:32  auto_snap      Temperatures snapshot
317946 04/18/10 02:32  auto_snap      Radiation and Ozone snapshot
317945 04/18/10 02:31  auto_snap      Hall A Tools snapshot
317944 04/18/10 02:31  auto_snap      Compton Polarimeter snapshot
317943 04/18/10 02:31  auto_snap      BigBox Magnet snapshot
317942 04/18/10 02:31  auto_snap      Beam Position and Current snapshot
317941 04/18/10 02:30  cusanno        Temperatures and radiation stable
317940 04/18/10 02:16  apar           Start_Parity_Run_2906__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317939 04/18/10 02:15  apar           End_of_Parity_Run_2905__CODA_Config=Prex
317938 04/18/10 01:31  cusanno        Target T/P OK
317937 04/18/10 01:28  cusanno        Dithering
317936 04/18/10 01:25  apar           Start_Parity_Run_2905__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317935 04/18/10 01:24  apar           End_of_Parity_Run_2904__CODA_Config=Prex
317934 04/18/10 00:58  silwal         dithering turned on, working fine now
317933 04/18/10 00:35  apar           Start_Parity_Run_2904__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production (cont'd),dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317932 04/18/10 00:33  apar           End_of_Parity_Run_2903__CODA_Config=Prex
317931 04/18/10 00:10  adaq           Beam Time Accounting
317930 04/18/10 00:06  Guy  Ron       Temprature Log Window
317929 04/18/10 00:03  Franklin       Odd dithering results
317928 04/18/10 00:01  Ole Hansen     Swing Shift Summary

Saturday

317927 04/17/10 23:57  Guy Ron        Recalibrated BCMs
318531  04/20/10 23:28  V. Sulkosky    Re: Recalibrated BCMs
317926 04/17/10 23:56  D. Parno       Target tools at 50 uA
317925 04/17/10 23:54  Ole Hansen     50 uA - start production
317924 04/17/10 23:49  a-onl          End_of_Run_6704
317923 04/17/10 23:45  apar           Start_Parity_Run_2903__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Start of production running again,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317922 04/17/10 23:39  Franklin       Starting Production Runs at 50 microamps
317921 04/17/10 23:38  Ole Hansen     Ramping to 50 uA
317920 04/17/10 23:34  Franklin       Dithering turned on
317919 04/17/10 23:32  Ole Hansen     Spot seems fine
317918 04/17/10 23:30  Ole Hansen     spot++ right for Pb/diamond
317917 04/17/10 23:25  a-onl          Start_Run_6704,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Raster check on Pb/diamond
317916 04/17/10 23:24  Ole Hansen     Right upper scint on
317915 04/17/10 23:22  a-onl          End_of_Run_6703
317914 04/17/10 23:22  a-onl          Start_Run_6703,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Raster check on Pb/diamond
317913 04/17/10 23:20  Ole Hansen     Rate on Pb/diamond
317912 04/17/10 23:17  Ole Hansen     Pb/diamond target
317911 04/17/10 23:17  D. Parno       Moved target to Pb Diamond #3
317910 04/17/10 23:15  Ole Hansen     Established "5nA"
317909 04/17/10 22:57  D. Parno       Moved target to BeO viewer
317908 04/17/10 22:52  a-onl          End_of_Run_6702
317907 04/17/10 22:52  Ole Hansen     spot++
317906 04/17/10 22:50  a-onl          Start_Run_6702,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Raster check 20x7 (MCC)
317905 04/17/10 22:44  Ole Hansen     spot++
317904 04/17/10 22:41  a-onl          End_of_Run_6701
317903 04/17/10 22:38  a-onl          Start_Run_6701,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Raster check
317902 04/17/10 22:37  O.Glamazdin    Moller results
317901 04/17/10 22:14  Ole Hansen     Recovery in progress
317900 04/17/10 21:48  Ole Hansen     Moller done, restoring production
317899 04/17/10 18:31  auto_snap      Temperatures snapshot
317898 04/17/10 18:31  auto_snap      Radiation and Ozone snapshot
317897 04/17/10 18:31  auto_snap      Hall A Tools snapshot
317896 04/17/10 18:31  auto_snap      Compton Polarimeter snapshot
317895 04/17/10 18:31  auto_snap      BigBox Magnet snapshot
317894 04/17/10 18:31  auto_snap      Beam Position and Current snapshot
317893 04/17/10 18:09  D. Parno       Target tools snapshot
317892 04/17/10 17:58  O.Glamazdin    BPM IPM1H01 reading is noisy
317891 04/17/10 17:58  apar           End_of_Parity_Run_2902__CODA_Config=Prex
317890 04/17/10 17:57  apar           Start_Parity_Run_2902__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=scaler test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317889 04/17/10 17:54  apar           Start_Parity_Run_2901__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=scaler test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317888 04/17/10 17:54  apar           End_of_Parity_Run_2901__CODA_Config=Prex
317887 04/17/10 17:48  silwal/R.Mic   more changes to the .crl to make scaler run forever
317886 04/17/10 17:34  apar           End_of_Parity_Run_2899__CODA_Config=Prex
317885 04/17/10 17:33  apar           Start_Parity_Run_2899__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=scaler test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317884 04/17/10 17:22  apar           End_of_Parity_Run_2898__CODA_Config=Prex
317883 04/17/10 17:21  Roman / Ahme   Moller scintillators HV corrected.
317882 04/17/10 17:21  Franklin       Staring run 2898 Cosmic running during moller
317881 04/17/10 17:07  Roman / Ahme   Moller HV
317880 04/17/10 16:59  adaq           Beam Time Accounting
317879 04/17/10 16:58  apar           Start_Parity_Run_2898__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Cosmic run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317878 04/17/10 16:44  Abdurahim      compton epics reboot
317877 04/17/10 16:24  Abdurahim      Compton epics reboot
317878  04/17/10 16:44  Abdurahim      compton epics reboot
317876 04/17/10 15:30  apar           End_of_Parity_Run_2897__CODA_Config=Prex
317875 04/17/10 15:04  Jack           VDC mixing system re-started
317874 04/17/10 14:46  apar           Start_Parity_Run_2897__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Cosmic run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317873 04/17/10 14:15  apar           End_of_Parity_Run_2896__CODA_Config=Prex
317872 04/17/10 14:10  apar           Start_Parity_Run_2896__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Cosmic run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317871 04/17/10 14:06  apar           End_of_Parity_Run_2895__CODA_Config=Prex
317870 04/17/10 14:03  apar           Start_Parity_Run_2895__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Cosmic run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317869 04/17/10 13:52  apar           End_of_Parity_Run_2894__CODA_Config=Prex
317868 04/17/10 13:51  apar           Start_Parity_Run_2894__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Cosmic run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317867 04/17/10 12:59  jwexler        Changed db files
317866 04/17/10 12:58  O.Glamazdin    Helicity board parameter change
317865 04/17/10 12:39  O.Glamazdin    Moller magnet alignment test results
317864 04/17/10 12:28  O.Glamazdin    Moller magnet has been filled
317863 04/17/10 11:15  dalton         Temperatures overnight
317862 04/17/10 11:10  apar           End_of_Parity_Run_2891__CODA_Config=Prex
317861 04/17/10 11:03  apar           Start_Parity_Run_2891__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Cosmic run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317860 04/17/10 11:02  apar           End_of_Parity_Run_2890__CODA_Config=Prex
317859 04/17/10 10:51  dalton         Runs changed to 720000 events
317858 04/17/10 10:43  dalton         Prompt and Charge
317857 04/17/10 10:31  silwal         dithering turned off
317856 04/17/10 10:31  auto_snap      Radiation and Ozone snapshot
317855 04/17/10 10:31  auto_snap      Hall A Tools snapshot
317854 04/17/10 10:31  auto_snap      Compton Polarimeter snapshot
317853 04/17/10 10:31  auto_snap      Charge Asymmetry snapshot
317852 04/17/10 10:31  silwal         PC IHWP IN/OUT Voltages and PITA slopes from Injector Studies
318294  04/19/10 16:59  paschke        correction: pita slope from injector studies at different RHWP position
317851 04/17/10 10:31  auto_snap      BigBox Magnet snapshot
317850 04/17/10 10:31  auto_snap      Beam Position and Current snapshot
317849 04/17/10 10:12  apar           Start_Parity_Run_2890__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Cosmic run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317848 04/17/10 10:11  apar           End_of_Parity_Run_2889__CODA_Config=Prex
317847 04/17/10 09:44  R. Michaels    re: charge per run
317858  04/17/10 10:43  dalton         Prompt and Charge
317859  04/17/10 10:51  dalton         Runs changed to 720000 events
317846 04/17/10 09:24  apar           Start_Parity_Run_2889__CODA_Config=Prex_Run_type=Cosmics,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Cosmic run,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317845 04/17/10 09:24  O.Glamazdin    Moller magnet alignment test
317844 04/17/10 09:18  ZAFAR AHMED    The target is empty target
317843 04/17/10 09:13  aniol          charge collected per run?
317847  04/17/10 09:44  R. Michaels    re: charge per run
317842 04/17/10 09:13  apar           End_of_Parity_Run_2888__CODA_Config=Prex
317841 04/17/10 08:52  apar           Start_Parity_Run_2888__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317840 04/17/10 08:51  apar           End_of_Parity_Run_2887__CODA_Config=Prex
317839 04/17/10 08:36  apar           End_of_Parity_Run_2886__CODA_Config=Prex
317838 04/17/10 08:30  apar           Start_Parity_Run_2887__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317837 04/17/10 08:09  apar           Start_Parity_Run_2886__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317836 04/17/10 08:07  apar           End_of_Parity_Run_2885__CODA_Config=Prex
317835 04/17/10 08:00  adaq           Beam Time Accounting
317834 04/17/10 07:58  M. Jen         04/17/10 Owl Shift Summary
317833 04/17/10 07:52  efuchey        target GUIs screenshots, target stability
317832 04/17/10 07:47  apar           Start_Parity_Run_2885__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317831 04/17/10 07:45  apar           End_of_Parity_Run_2884__CODA_Config=Prex
317830 04/17/10 07:25  apar           Start_Parity_Run_2884__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317829 04/17/10 07:24  apar           End_of_Parity_Run_2883__CODA_Config=Prex
317828 04/17/10 07:03  apar           Start_Parity_Run_2883__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317827 04/17/10 07:02  apar           End_of_Parity_Run_2882__CODA_Config=Prex
317826 04/17/10 06:57  cusanno        End-of-Run 2871 lost
317825 04/17/10 06:42  apar           End_of_Parity_Run_2861__CODA_Config=Prex
317824 04/17/10 06:41  apar           Start_Parity_Run_2882__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317823 04/17/10 06:40  apar           End_of_Parity_Run_2881__CODA_Config=Prex
317822 04/17/10 06:19  apar           Start_Parity_Run_2881__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317821 04/17/10 06:18  apar           End_of_Parity_Run_2880__CODA_Config=Prex
317820 04/17/10 05:58  apar           Start_Parity_Run_2880__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317819 04/17/10 05:56  apar           End_of_Parity_Run_2879__CODA_Config=Prex
317818 04/17/10 05:36  apar           Start_Parity_Run_2879__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317817 04/17/10 05:35  apar           End_of_Parity_Run_2878__CODA_Config=Prex
317816 04/17/10 05:15  apar           Start_Parity_Run_2878__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317815 04/17/10 05:13  apar           End_of_Parity_Run_2877__CODA_Config=Prex
317814 04/17/10 04:56  cusanno        minor troubles with CODA
317813 04/17/10 04:53  cusanno        Half-Wave-Plate OUT starting from run 2867
317812 04/17/10 04:52  apar           Start_Parity_Run_2877__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317811 04/17/10 04:48  apar           Start_Parity_Run_2876__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317810 04/17/10 04:45  apar           Start_Parity_Run_2875__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317809 04/17/10 04:41  apar           Start_Parity_Run_2874__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317808 04/17/10 04:40  apar           End_of_Parity_Run_2873__CODA_Config=Prex
317807 04/17/10 04:26  cusanno        Dithering
317806 04/17/10 04:23  cusanno        spot++
317805 04/17/10 04:19  apar           Start_Parity_Run_2873__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317804 04/17/10 04:18  apar           End_of_Parity_Run_2872__CODA_Config=Prex
317803 04/17/10 03:57  apar           Start_Parity_Run_2872__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317802 04/17/10 03:56  apar           End_of_Parity_Run_2870__CODA_Config=Prex
317801 04/17/10 03:35  apar           Start_Parity_Run_2871__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317800 04/17/10 03:13  apar           Start_Parity_Run_2870__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317799 04/17/10 03:12  apar           End_of_Parity_Run_2869__CODA_Config=Prex
317798 04/17/10 02:51  apar           Start_Parity_Run_2869__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317797 04/17/10 02:50  apar           End_of_Parity_Run_2868__CODA_Config=Prex
317796 04/17/10 02:31  auto_snap      Radiation and Ozone snapshot
317795 04/17/10 02:30  auto_snap      Hall A Tools snapshot
317794 04/17/10 02:30  auto_snap      Compton Polarimeter snapshot
317793 04/17/10 02:30  auto_snap      Charge Asymmetry snapshot
317792 04/17/10 02:30  auto_snap      BigBox Magnet snapshot
317791 04/17/10 02:30  auto_snap      Beam Position and Current snapshot
317790 04/17/10 02:29  apar           Start_Parity_Run_2868__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317789 04/17/10 02:28  apar           End_of_Parity_Run_2867__CODA_Config=Prex
317788 04/17/10 02:24  dalton         Half Wave Plate HWP change to out.  Slug 5
317787 04/17/10 02:08  apar           Start_Parity_Run_2867__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA, HWP OUT now,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317786 04/17/10 02:04  apar           End_of_Parity_Run_2866__CODA_Config=Prex
317785 04/17/10 01:50  apar           Start_Parity_Run_2866__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317784 04/17/10 01:48  apar           End_of_Parity_Run_2865__CODA_Config=Prex
317783 04/17/10 01:28  apar           Start_Parity_Run_2865__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317782 04/17/10 01:27  apar           End_of_Parity_Run_2864__CODA_Config=Prex
317781 04/17/10 01:06  apar           Start_Parity_Run_2864__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317780 04/17/10 01:05  apar           End_of_Parity_Run_2863__CODA_Config=Prex
317779 04/17/10 00:44  apar           Start_Parity_Run_2863__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317778 04/17/10 00:43  apar           End_of_Parity_Run_2862__CODA_Config=Prex
317777 04/17/10 00:22  apar           Start_Parity_Run_2862__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317776 04/17/10 00:19  M. Jen         Hall-A General Tool
317775 04/17/10 00:02  adaq           Beam Time Accounting
317774 04/17/10 00:00  aniol          cooldown time for collimators
317773 04/17/10 00:00  apar           Start_Parity_Run_2861__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)

Friday

317772 04/16/10 23:59  Aniol          swing shift summary
317771 04/16/10 23:49  Aniol          MCC takes away beam
317770 04/16/10 23:34  aniol          beam/temp strip chart
317769 04/16/10 23:33  apar           End_of_Parity_Run_2860__CODA_Config=Prex
317768 04/16/10 23:24  apar           Start_Parity_Run_2860__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317767 04/16/10 23:22  apar           End_of_Parity_Run_2859__CODA_Config=Prex
317766 04/16/10 23:02  apar           Start_Parity_Run_2859__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317765 04/16/10 23:01  apar           End_of_Parity_Run_2858__CODA_Config=Prex
317764 04/16/10 22:40  apar           Start_Parity_Run_2858__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317763 04/16/10 22:38  apar           End_of_Parity_Run_2857__CODA_Config=Prex
317762 04/16/10 22:32  Aniol          compton ion chambers tripping beam
317761 04/16/10 22:22  Franklin       Coda restart
317760 04/16/10 22:18  apar           Start_Parity_Run_2857__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317759 04/16/10 22:14  apar           Start_Parity_Run_2856__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317758 04/16/10 22:08  apar           Start_Parity_Run_2855__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317757 04/16/10 22:06  apar           End_of_Parity_Run_2854__CODA_Config=Prex
317756 04/16/10 22:03  dalton         Temperature equlibrium at 54 uA
317755 04/16/10 21:45  apar           Start_Parity_Run_2854__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317754 04/16/10 21:44  apar           End_of_Parity_Run_2853__CODA_Config=Prex
317753 04/16/10 21:23  apar           Start_Parity_Run_2853__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317752 04/16/10 21:22  apar           End_of_Parity_Run_2852__CODA_Config=Prex
317751 04/16/10 21:04  dalton         Sample dithering cycle
317750 04/16/10 21:04  apar           Start_Parity_Run_2852__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317749 04/16/10 21:00  apar           End_of_Parity_Run_2851__CODA_Config=Prex
317748 04/16/10 20:46  Aniol          continue to run at 50uA production
317747 04/16/10 20:39  apar           Start_Parity_Run_2851__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317746 04/16/10 20:38  apar           End_of_Parity_Run_2850__CODA_Config=Prex
317745 04/16/10 20:35  Aniol          temp. history, 50uA
317744 04/16/10 20:18  D. Parno       Target temp, vacuum behavior
317743 04/16/10 20:17  apar           Start_Parity_Run_2850__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317742 04/16/10 20:16  apar           End_of_Parity_Run_2849__CODA_Config=Prex
317741 04/16/10 19:56  apar           Start_Parity_Run_2849__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317740 04/16/10 19:54  apar           End_of_Parity_Run_2848__CODA_Config=Prex
317739 04/16/10 19:34  apar           Start_Parity_Run_2848__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317738 04/16/10 19:32  apar           End_of_Parity_Run_2847__CODA_Config=Prex
317737 04/16/10 19:25  dalton         Going to 50 uA
317736 04/16/10 19:19  dalton         Reset Left Q1 at 17:05
317735 04/16/10 19:12  Aniol          going to 50uA
317734 04/16/10 19:12  apar           Start_Parity_Run_2847__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 50 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317733 04/16/10 19:11  apar           End_of_Parity_Run_2846__CODA_Config=Prex
317732 04/16/10 19:11  apar           End_of_Parity_Run_2846__CODA_Config=Prex
317731 04/16/10 19:08  Guy Ron        Going to 50uA
317730 04/16/10 19:04  Jack           VDC high voltage should remain OFF
317875  04/17/10 15:04  Jack           VDC mixing system re-started
317729 04/16/10 19:01  Franklin       VDC Gas mixture problem
317728 04/16/10 18:56  Aniol          temp. charts
317727 04/16/10 18:50  apar           Start_Parity_Run_2846__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 microA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317726 04/16/10 18:48  apar           End_of_Parity_Run_2845__CODA_Config=Prex
317725 04/16/10 18:44  Aniol          dithering turned on
317724 04/16/10 18:41  apar           Start_Parity_Run_2845__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 40 uA, turned dithering on,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317723 04/16/10 18:32  apar           End_of_Parity_Run_2844__CODA_Config=Prex
317722 04/16/10 18:30  auto_snap      Radiation and Ozone snapshot
317721 04/16/10 18:30  auto_snap      Hall A Tools snapshot
317720 04/16/10 18:30  auto_snap      Compton Polarimeter snapshot
317719 04/16/10 18:30  auto_snap      Charge Asymmetry snapshot
317718 04/16/10 18:30  auto_snap      BigBox Magnet snapshot
317717 04/16/10 18:30  auto_snap      Beam Position and Current snapshot
317716 04/16/10 18:10  apar           Start_Parity_Run_2844__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 40 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317715 04/16/10 18:09  apar           End_of_Parity_Run_2843__CODA_Config=Prex
317714 04/16/10 18:00  D. Parno       Target Screen Capture
317713 04/16/10 17:55  apar           Start_Parity_Run_2843__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 40 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317712 04/16/10 17:55  riordan        GEM Analysis Status
317711 04/16/10 17:54  apar           End_of_Parity_Run_2842__CODA_Config=Prex
317710 04/16/10 17:42  apar           Start_Parity_Run_2842__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 40 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317709 04/16/10 17:39  D. Parno       Moved to Pb Diamond Target #3
317708 04/16/10 17:36  aniol          spot_R
317707 04/16/10 17:33  aniol          spot_R
317706 04/16/10 17:30  a-onl          End_of_Run_6700
317705 04/16/10 17:29  a-onl          Start_Run_6700,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317704 04/16/10 17:28  a-onl          End_of_Run_6699
317703 04/16/10 17:24  silwal         modified ~/db/misc/Prex.misc to fill appropriate trees in the PAN output rootfiles
317702 04/16/10 17:22  a-onl          Start_Run_6699,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317701 04/16/10 17:18  D. Parno       Target to Empty
317700 04/16/10 17:12  Aniol          target screen, after LQ1 power cycle
317699 04/16/10 17:06  mercado        Database change for BCMs
318944 04/23/10 11:36  mercado        Wrong BCM mapping.
317698 04/16/10 17:02  aniol          Left data suspect after 14:20
317697 04/16/10 17:00  aniol          power cycle LQ1
317696 04/16/10 16:56  apar           End_of_Parity_Run_2841__CODA_Config=Prex
317695 04/16/10 16:52  apar           Start_Parity_Run_2841__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 40 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317694 04/16/10 16:49  apar           End_of_Parity_Run_2840__CODA_Config=Prex
317693 04/16/10 16:44  apar           Start_Parity_Run_2840__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 40 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317692 04/16/10 16:43  aniol          LQ1 readback = 0A ! page tech
317691 04/16/10 16:43  apar           End_of_Parity_Run_2839__CODA_Config=Prex
317690 04/16/10 16:31  apar           Start_Parity_Run_2839__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 40 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317689 04/16/10 16:30  apar           End_of_Parity_Run_2838__CODA_Config=Prex
317688 04/16/10 16:14  apar           Start_Parity_Run_2838__CODA_Config=Prex_Run_type=Production,beam_current=40,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 40 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317687 04/16/10 16:09  R. Michaels    re: slow EPICS
317686 04/16/10 16:06  apar           End_of_Parity_Run_2835__CODA_Config=Prex
317685 04/16/10 16:01  adaq           Beam Time Accounting
317684 04/16/10 15:55  apar           Start_Parity_Run_2835__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317683 04/16/10 15:53  apar           End_of_Parity_Run_2834__CODA_Config=Prex
317682 04/16/10 15:50  silwal         dithering plots, bpms
317681 04/16/10 15:36  apar           Start_Parity_Run_2834__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317680 04/16/10 15:29  apar           End_of_Parity_Run_2833__CODA_Config=Prex
317679 04/16/10 15:16  kowalski       PREX
317678 04/16/10 15:08  kowalski       PREX
317677 04/16/10 15:08  apar           Start_Parity_Run_2833__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317676 04/16/10 15:00  mcnulty        Fixed x distribution plot for Rarm alignment
317675 04/16/10 14:57  silwal         using 'fillditheronly true' to thin the datastream
317674 04/16/10 14:35  Guy Ron        BCM Calibration
317673 04/16/10 14:30  silwal         dithering turned on towards the end of run # 2831
317672 04/16/10 14:30  benesch        results of Compton tuning attempt this morning
317671 04/16/10 14:28  apar           End_of_Parity_Run_2832__CODA_Config=Prex
317670 04/16/10 14:16  apar           Start_Parity_Run_2832__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317669 04/16/10 13:56  apar           End_of_Parity_Run_2831__CODA_Config=Prex
317668 04/16/10 13:36  apar           Start_Parity_Run_2831__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317667 04/16/10 13:34  M Friend       Compton rates after tune
317666 04/16/10 13:13  ZAFAR AHMED    Target is Pb Diamon #3
317665 04/16/10 13:07  ZAFAR AHMED    Slpt++
317664 04/16/10 13:04  Jack (Techs)   More thermocouples on the target
317663 04/16/10 13:03  a-onl          End_of_Run_27408
317662 04/16/10 13:01  a-onl          Start_Run_27408,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317661 04/16/10 12:57  a-onl          End_of_Run_27407
317660 04/16/10 12:56  a-onl          Start_Run_27407,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317659 04/16/10 12:55  ZAFAR AHMED    Target is BeO
317658 04/16/10 12:49  dalton         Epics events slow again
317687  04/16/10 16:09  R. Michaels    re: slow EPICS
317657 04/16/10 12:37  mcnulty        Larm A_T det alignment (update)
317656 04/16/10 12:32  dalton         Temperature decay
317655 04/16/10 12:19  O.Glamazdin    Moller magnet has been filled
317654 04/16/10 12:18  Abdurahim      Compton laser and cavity lock has been restored
317653 04/16/10 12:16  mcnulty        Access activity
317652 04/16/10 11:21  kowalski       Magnets
317651 04/16/10 11:19  apar           End_of_Parity_Run_2830__CODA_Config=Prex
317650 04/16/10 10:58  apar           Start_Parity_Run_2830__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317649 04/16/10 10:35  ZAFAR AHMED    Dithering is off
317648 04/16/10 10:30  auto_snap      Radiation and Ozone snapshot
317647 04/16/10 10:30  auto_snap      Hall A Tools snapshot
317646 04/16/10 10:30  auto_snap      Compton Polarimeter snapshot
317645 04/16/10 10:30  auto_snap      Charge Asymmetry snapshot
317644 04/16/10 10:30  auto_snap      BigBox Magnet snapshot
317643 04/16/10 10:30  auto_snap      Beam Position and Current snapshot
317642 04/16/10 09:50  ZAFAR AHMED    Target is empty target.
317641 04/16/10 09:43  apar           End_of_Parity_Run_2829__CODA_Config=Prex
317640 04/16/10 09:36  M Friend       Compton EPICS reboot
317639 04/16/10 09:34  Guy Ron        New Thermocouples
317638 04/16/10 09:30  apar           Start_Parity_Run_2829__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317637 04/16/10 09:29  apar           End_of_Parity_Run_2828__CODA_Config=Prex
317636 04/16/10 09:08  apar           Start_Parity_Run_2828__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317635 04/16/10 09:07  apar           End_of_Parity_Run_2827__CODA_Config=Prex
317634 04/16/10 08:47  apar           Start_Parity_Run_2827__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317633 04/16/10 08:45  apar           End_of_Parity_Run_2826__CODA_Config=Prex
317632 04/16/10 08:25  apar           Start_Parity_Run_2826__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317631 04/16/10 08:23  apar           End_of_Parity_Run_2825__CODA_Config=Prex
317630 04/16/10 08:19  adaq           Beam Time Accounting
317629 04/16/10 08:02  apar           Start_Parity_Run_2825__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317628 04/16/10 08:02  Jack (Techs)   Logging of temperatures in EPICS
317627 04/16/10 08:01  apar           End_of_Parity_Run_2824__CODA_Config=Prex
317626 04/16/10 07:48  R. Michaels    added temps to Epics logger
317628  04/16/10 08:02  Jack (Techs)   Logging of temperatures in EPICS
317658 04/16/10 12:49  dalton         Epics events slow again
317625 04/16/10 07:40  apar           Start_Parity_Run_2824__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317624 04/16/10 07:39  apar           End_of_Parity_Run_2823__CODA_Config=Prex
317623 04/16/10 07:19  apar           Start_Parity_Run_2823__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317622 04/16/10 07:17  apar           End_of_Parity_Run_2822__CODA_Config=Prex
317621 04/16/10 07:16  R. Michaels    temps at 30 uA (again)
317620 04/16/10 06:57  apar           Start_Parity_Run_2822__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317619 04/16/10 06:55  apar           End_of_Parity_Run_2821__CODA_Config=Prex
317618 04/16/10 06:35  apar           Start_Parity_Run_2821__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA while continuing heat tests,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317617 04/16/10 06:34  apar           End_of_Parity_Run_2820__CODA_Config=Prex
317616 04/16/10 06:13  apar           Start_Parity_Run_2820__CODA_Config=Prex_Run_type=Production,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Production at 30 uA while continuing heat tests,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317615 04/16/10 06:11  apar           End_of_Parity_Run_2819__CODA_Config=Prex
317614 04/16/10 06:05  R. Michaels    temps at 30 uA
317621 04/16/10 07:16  R. Michaels    temps at 30 uA (again)
317613 04/16/10 05:55  R. Michaels    attempt #N to fix CH scaler
317612 04/16/10 05:51  apar           Start_Parity_Run_2819__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on, changes to scaler,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317611 04/16/10 05:43  apar           Start_Parity_Run_2817__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on, changes to scaler,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317610 04/16/10 05:37  apar           End_of_Parity_Run_2816__CODA_Config=Prex
317609 04/16/10 05:36  silwal         bcm1 before/after recent .crl modifications
317608 04/16/10 05:33  apar           Start_Parity_Run_2816__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317607 04/16/10 05:32  apar           End_of_Parity_Run_2815__CODA_Config=Prex
317606 04/16/10 05:27  silwal         more .crl changes to accomodate CH 'dirty trick'
317609 04/16/10 05:36  silwal         bcm1 before/after recent .crl modifications
317605 04/16/10 05:10  apar           Start_Parity_Run_2815__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on, modified crl parameters some more for dirty trick,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317604 04/16/10 05:05  R. Michaels    happex3_ts.crl mod
317603 04/16/10 05:01  efuchey        Target GUIs screenshots
317602 04/16/10 04:48  apar           Start_Parity_Run_2813__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317601 04/16/10 04:47  apar           End_of_Parity_Run_2812__CODA_Config=Prex
317600 04/16/10 04:41  R. Michaels    temps at 30 uA (update)
317599 04/16/10 04:33  apar           Start_Parity_Run_2812__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317598 04/16/10 04:32  apar           End_of_Parity_Run_2811__CODA_Config=Prex
317597 04/16/10 04:11  apar           Start_Parity_Run_2811__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317596 04/16/10 04:10  apar           End_of_Parity_Run_2810__CODA_Config=Prex
317595 04/16/10 04:03  silwal         turned dithering on
317594 04/16/10 03:58  Guy Ron        Temp Stripcharts
317593 04/16/10 03:54  apar           Start_Parity_Run_2810__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317592 04/16/10 03:53  apar           End_of_Parity_Run_2809__CODA_Config=Prex
317591 04/16/10 03:33  apar           Start_Parity_Run_2809__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test, dithering turned on,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317590 04/16/10 03:31  apar           End_of_Parity_Run_2808__CODA_Config=Prex
317589 04/16/10 03:09  adaq           Stripcharts
317588 04/16/10 03:07  apar           Start_Parity_Run_2808__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317587 04/16/10 03:06  apar           End_of_Parity_Run_2807__CODA_Config=Prex
317586 04/16/10 03:03  R. Michaels    Temp vs time
317589 04/16/10 03:09  adaq           Stripcharts
317585 04/16/10 02:31  apar           Start_Parity_Run_2807__CODA_Config=Prex_Run_type=Calibration,beam_current=30,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317584 04/16/10 02:29  auto_snap      Radiation and Ozone snapshot
317583 04/16/10 02:29  auto_snap      Hall A Tools snapshot
317582 04/16/10 02:29  auto_snap      Compton Polarimeter snapshot
317581 04/16/10 02:29  auto_snap      Charge Asymmetry snapshot
317580 04/16/10 02:29  auto_snap      BigBox Magnet snapshot
317579 04/16/10 02:29  auto_snap      Beam Position and Current snapshot
317578 04/16/10 02:29  apar           End_of_Parity_Run_2806__CODA_Config=Prex
317577 04/16/10 02:29  Guy Ron        Temperature Stripchart
317576 04/16/10 02:22  apar           Start_Parity_Run_2806__CODA_Config=Prex_Run_type=Calibration,beam_current=20,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data during heat test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317575 04/16/10 02:20  apar           End_of_Parity_Run_2805__CODA_Config=Prex
317574 04/16/10 02:19  jwexler        Quartz and Lumi HV
317573 04/16/10 02:17  R. Michaels    blinding for Pb ?
317572 04/16/10 02:13  R. Michaels    20 uA on lead
317577 04/16/10 02:29  Guy Ron        Temperature Stripchart
317571 04/16/10 01:57  apar           Start_Parity_Run_2805__CODA_Config=Prex_Run_type=Calibration,beam_current=5,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data - Heat test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
317570 04/16/10 01:56  efuchey        Target move to Pb-Diamond
317569 04/16/10 01:48  efuchey        Target Move
317568 04/16/10 01:47  apar           End_of_Parity_Run_2804__CODA_Config=Prex
317567 04/16/10 01:45  apar           Start_Parity_Run_2804__CODA_Config=Prex_Run_type=Calibration,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data - Heat test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317566 04/16/10 01:45  Guy Ron        First 15 min of heat test
317565 04/16/10 01:44  apar           End_of_Parity_Run_2803__CODA_Config=Prex
317564 04/16/10 01:41  R. Michaels    septum turned on.
317563 04/16/10 01:36  apar           Start_Parity_Run_2803__CODA_Config=Prex_Run_type=Calibration,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data - Heat test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317562 04/16/10 01:32  apar           End_of_Parity_Run_2802__CODA_Config=Prex
317561 04/16/10 01:25  apar           Start_Parity_Run_2802__CODA_Config=Prex_Run_type=Calibration,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Parasitic data - Heat test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317560 04/16/10 01:13  R. Michaels    re: runs 
317559 04/16/10 01:13  efuchey        Target move
317558 04/16/10 01:11  R. Michaels    spot++ run
317557 04/16/10 01:11  a-onl          End_of_Run_27406
317556 04/16/10 01:09  a-onl          Start_Run_27406,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317555 04/16/10 01:00  efuchey        Target move
317554 04/16/10 01:00  a-onl          End_of_Run_27405
317553 04/16/10 01:00  a-onl          Start_Run_27405,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317552 04/16/10 00:57  R. Michaels    DAQ mod (late entry)
317604 04/16/10 05:05  R. Michaels    happex3_ts.crl mod
317606 04/16/10 05:27  silwal         more .crl changes to accomodate CH 'dirty trick'
317551 04/16/10 00:55  riordan        Beam Position Scan Summary
317550 04/16/10 00:55  jwexler        Changed to integrating mode
317549 04/16/10 00:35  A. Camsonne    GEM HV off
317548 04/16/10 00:27  riordan        Sieve is OUT
317547 04/16/10 00:14  riordan        VDCs, Septum, Upper Scintillator off
317546 04/16/10 00:10  efuchey        Target GUIs screenshots
317545 04/16/10 00:09  a-onl          End_of_Run_27404
317544 04/16/10 00:09  a-onl          End_of_Run_6698
317543 04/16/10 00:09  adaq           Beam Time Accounting
     1 04/16/10 00:08  aniol          bta hangup
317542 04/16/10 00:07  a-onl          Start_Run_6698,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317541 04/16/10 00:00  Aniol          swing shift summary

Thursday

317540 04/15/10 23:56  a-onl          End_of_Run_27403
317539 04/15/10 23:55  a-onl          End_of_Run_6697
317538 04/15/10 23:53  a-onl          Start_Run_27403,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317560  04/16/10 01:13  R. Michaels    re: runs 
317537 04/15/10 23:53  a-onl          Start_Run_6697,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317536 04/15/10 23:51  a-onl          End_of_Run_27402
317535 04/15/10 23:44  aniol          r27402 has gem data
317534 04/15/10 23:44  a-onl          End_of_Run_6696
317533 04/15/10 23:42  a-onl          Start_Run_27402,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317532 04/15/10 23:42  a-onl          Start_Run_6696,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317531 04/15/10 23:42  A. Camsonne    GEM HV on 
317530 04/15/10 23:40  a-onl          End_of_Run_27401
317529 04/15/10 23:39  a-onl          End_of_Run_6695
317528 04/15/10 23:37  a-onl          Start_Run_6695,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317527 04/15/10 23:37  a-onl          Start_Run_27401,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317526 04/15/10 23:32  a-onl          End_of_Run_27400
317525 04/15/10 23:32  a-onl          End_of_Run_6694
317524 04/15/10 23:30  a-onl          Start_Run_27400,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317522 04/15/10 23:28  a-onl          End_of_Run_6693
317521 04/15/10 23:27  a-onl          End_of_Run_27399
317520 04/15/10 23:26  a-onl          Start_Run_27399,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317519 04/15/10 23:26  a-onl          Start_Run_6693,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317518 04/15/10 23:24  a-onl          End_of_Run_6692
317517 04/15/10 23:24  a-onl          End_of_Run_27398
317516 04/15/10 23:22  a-onl          Start_Run_27398,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317515 04/15/10 23:22  a-onl          Start_Run_6692,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317514 04/15/10 23:18  a-onl          End_of_Run_27397
317513 04/15/10 23:17  a-onl          End_of_Run_6691
317512 04/15/10 23:15  a-onl          Start_Run_6691,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317511 04/15/10 23:15  a-onl          Start_Run_27397,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317510 04/15/10 23:13  a-onl          End_of_Run_27396
317509 04/15/10 23:12  a-onl          End_of_Run_6690
317508 04/15/10 23:10  a-onl          Start_Run_6690,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317507 04/15/10 23:10  a-onl          Start_Run_27396,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317506 04/15/10 23:06  a-onl          End_of_Run_27395
317505 04/15/10 23:06  a-onl          End_of_Run_6689
317504 04/15/10 23:04  a-onl          Start_Run_27395,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317503 04/15/10 23:04  a-onl          Start_Run_6689,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317502 04/15/10 23:01  a-onl          End_of_Run_27394
317501 04/15/10 23:01  a-onl          End_of_Run_6688
317500 04/15/10 22:59  a-onl          Start_Run_6688,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317499 04/15/10 22:59  a-onl          Start_Run_27394,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317498 04/15/10 22:56  a-onl          End_of_Run_27393
317497 04/15/10 22:56  a-onl          End_of_Run_6687
317496 04/15/10 22:54  a-onl          Start_Run_6687,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317495 04/15/10 22:54  a-onl          Start_Run_27393,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317494 04/15/10 22:48  a-onl          End_of_Run_6686
317493 04/15/10 22:48  a-onl          End_of_Run_27392
317492 04/15/10 22:46  a-onl          Start_Run_27392,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317491 04/15/10 22:46  a-onl          Start_Run_6686,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317490 04/15/10 22:46  a-onl          End_of_Run_6685
317489 04/15/10 22:46  a-onl          End_of_Run_27391
317488 04/15/10 22:45  a-onl          Start_Run_6685,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317487 04/15/10 22:45  a-onl          Start_Run_27391,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Sieve study
317486 04/15/10 22:27  riordan        VDCs On, Septum On
317485 04/15/10 22:27  A. Shahinyan   Target move
317484 04/15/10 22:26  aniol          power permit back
317483 04/15/10 22:12  R. Michaels    ask for access, turn off septum
317482 04/15/10 22:09  R. Michaels    Pb target position scan, finished.
317481 04/15/10 22:08  A. Shahinyan   Target move
317480 04/15/10 21:59  a-onl          End_of_Run_27390
317479 04/15/10 21:59  a-onl          End_of_Run_6684
317478 04/15/10 21:57  a-onl          Start_Run_27390,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert = 1000
317477 04/15/10 21:57  a-onl          Start_Run_6684,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert = 1000
317476 04/15/10 21:55  a-onl          End_of_Run_6683
317475 04/15/10 21:55  a-onl          End_of_Run_27389
317474 04/15/10 21:50  a-onl          Start_Run_6683,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert = 0
317473 04/15/10 21:50  a-onl          Start_Run_27389,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert = 0
317472 04/15/10 21:50  a-onl          End_of_Run_27388
317471 04/15/10 21:49  a-onl          End_of_Run_6682
317470 04/15/10 21:47  a-onl          Start_Run_27388,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert = +2000
317469 04/15/10 21:47  a-onl          Start_Run_6682,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert = +2000
317468 04/15/10 21:46  a-onl          End_of_Run_27387
317467 04/15/10 21:46  a-onl          End_of_Run_6681
317466 04/15/10 21:44  a-onl          Start_Run_27387,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert = +500
317465 04/15/10 21:44  a-onl          Start_Run_6681,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert = +500
317464 04/15/10 21:42  a-onl          End_of_Run_27386
317463 04/15/10 21:42  a-onl          End_of_Run_6680
317462 04/15/10 21:41  a-onl          Start_Run_27386,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Horiz = +1750
317461 04/15/10 21:41  a-onl          Start_Run_6680,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Horiz = +1750
317460 04/15/10 21:39  a-onl          End_of_Run_27385
317459 04/15/10 21:39  a-onl          End_of_Run_6679
317458 04/15/10 21:39  a-onl          Start_Run_27385,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Horiz = -1750
317457 04/15/10 21:39  a-onl          Start_Run_6679,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Horiz = -1750
317456 04/15/10 21:37  a-onl          End_of_Run_6678
317454 04/15/10 21:35  a-onl          Start_Run_27384,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert -700
317453 04/15/10 21:35  a-onl          Start_Run_6678,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert -700
317452 04/15/10 21:34  a-onl          End_of_Run_27383
317451 04/15/10 21:34  a-onl          End_of_Run_6677
317450 04/15/10 21:34  R. Michaels    Centering on Pb, part 1
317449 04/15/10 21:30  a-onl          Start_Run_27383,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert -2500
317448 04/15/10 21:30  a-onl          Start_Run_6677,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert -2500
317447 04/15/10 21:30  a-onl          End_of_Run_27382
317446 04/15/10 21:30  a-onl          End_of_Run_6676
317445 04/15/10 21:29  a-onl          Start_Run_27382,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert -1000
317444 04/15/10 21:29  a-onl          Start_Run_6676,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Vert -1000
317443 04/15/10 21:28  a-onl          End_of_Run_27381
317442 04/15/10 21:28  a-onl          End_of_Run_6675
317441 04/15/10 21:26  a-onl          Start_Run_27381,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317440 04/15/10 21:26  a-onl          Start_Run_6675,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317439 04/15/10 21:21  a-onl          End_of_Run_27380
317438 04/15/10 21:21  a-onl          End_of_Run_6674
317437 04/15/10 21:18  a-onl          Start_Run_27380,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317436 04/15/10 21:17  a-onl          Start_Run_6674,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=on,beam_current=0.005,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317435 04/15/10 21:16  R. Michaels    putting in Pb/diamond at few nA
317434 04/15/10 21:14  A. Shahinyan   Target move
317433 04/15/10 21:08  benesch        better elog for MCZ1H04 calibration
317432 04/15/10 21:03  a-onl          End_of_Run_27379
317431 04/15/10 21:00  A. Shahinyan   Target move
317430 04/15/10 20:57  R. Michaels    calibration of MCZ1H04 for 3 mm box.
317433  04/15/10 21:08  benesch        better elog for MCZ1H04 calibration
317429 04/15/10 20:47  a-onl          Start_Run_27379,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317428 04/15/10 20:44  R. Michaels    Beam centering on BeO
317427 04/15/10 20:37  A. Shahinyan   Target move
317426 04/15/10 20:17  ZAFAR AHMED    Target is BeO
317425 04/15/10 20:16  A. Camsonne    GEM HV off
317424 04/15/10 20:13  a-onl          End_of_Run_6673
317423 04/15/10 20:13  a-onl          End_of_Run_27378
317422 04/15/10 20:12  R. Michaels    spot size adjustment
317421 04/15/10 20:08  a-onl          Start_Run_27378,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317420 04/15/10 20:08  a-onl          Start_Run_6673,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317419 04/15/10 20:08  A. Camsonne    GEM HV INFN changed
317418 04/15/10 20:07  a-onl          End_of_Run_27377
317417 04/15/10 20:07  a-onl          End_of_Run_6672
317416 04/15/10 20:01  a-onl          Start_Run_6672,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317415 04/15/10 20:00  a-onl          Start_Run_27377,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317414 04/15/10 20:00  a-onl          End_of_Run_27376
317413 04/15/10 19:59  a-onl          Start_Run_27376,Run_type=Spot++,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317412 04/15/10 19:58  ZAFAR AHMED    Target is empty target.
317411 04/15/10 19:58  a-onl          End_of_Run_27375
317410 04/15/10 19:54  a-onl          Start_Run_27375,Run_type=Spot++,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317409 04/15/10 19:36  jwexler        Detector current 'near final' encoder readouts.
317408 04/15/10 19:32  a-onl          Start_Run_6671,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2 (dx_at=0,dy_at=+3cm)
317407 04/15/10 19:32  a-onl          Start_Run_27374,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=more alignment (dx_at=0, dy_at=+3cm)
317406 04/15/10 19:29  a-onl          End_of_Run_27373
317405 04/15/10 19:28  a-onl          End_of_Run_6670
317404 04/15/10 19:22  a-onl          Start_Run_27373,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=more alignment (dx_at=0, dy_at=-2cm)
317403 04/15/10 19:22  a-onl          Start_Run_6670,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2 (dx_at=0,dy_at=-2cm)
317402 04/15/10 19:18  mcnulty        Larm quartz alignment (near final)
317401 04/15/10 19:12  mcnulty        Rarm quartz alignment (near final)
317676  04/16/10 15:00  mcnulty        Fixed x distribution plot for Rarm alignment
317400 04/15/10 19:11  a-onl          End_of_Run_27372
317399 04/15/10 19:05  mcnulty        Quartz signals
317398 04/15/10 19:02  a-onl          End_of_Run_6669
317397 04/15/10 18:50  a-onl          Start_Run_6669,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2 (dx=-0.4cm, dy = -0.2, dx_at=-2cm)
317396 04/15/10 18:50  a-onl          Start_Run_27372,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=more alignment (dx=-0.0cm, dy=+0.1cm)
317395 04/15/10 18:45  a-onl          End_of_Run_27371
317394 04/15/10 18:40  a-onl          End_of_Run_6668
317393 04/15/10 18:36  Jack (Techs)   Thermocouple on the beampipe - readout channel corrected
317392 04/15/10 18:33  a-onl          Start_Run_27371,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=more alignment (dx=-0.4cm, dy=+0.4cm)
317391 04/15/10 18:32  a-onl          Start_Run_6668,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2 (dx=-0.4cm, dy = -0.2)
317390 04/15/10 18:31  a-onl          End_of_Run_27370
317389 04/15/10 18:30  aniol          bta working now
317388 04/15/10 18:29  auto_snap      Radiation and Ozone snapshot
317387 04/15/10 18:29  auto_snap      Hall A Tools snapshot
317386 04/15/10 18:29  auto_snap      Compton Polarimeter snapshot
317385 04/15/10 18:29  auto_snap      Charge Asymmetry snapshot
317384 04/15/10 18:29  auto_snap      BigBox Magnet snapshot
317383 04/15/10 18:29  auto_snap      Beam Position and Current snapshot
317382 04/15/10 18:28  A. Camsonne    GEM HV changed
317381 04/15/10 18:24  A. Shahinyan   Target move
317380 04/15/10 18:21  mcnulty        spot++
317379 04/15/10 18:20  jwexler        BPM values.
317378 04/15/10 18:19  a-onl          Start_Run_27370,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317377 04/15/10 18:17  aniol          asked for beam permit
317376 04/15/10 18:17  A. Shahinyan   Target move
317375 04/15/10 18:16  aniol          turned on septum
317374 04/15/10 18:03  aniol          septum turned off
317373 04/15/10 18:02  aniol          controlled acces
317372 04/15/10 17:59  aniol          controlled access
317371 04/15/10 17:49  a-onl          End_of_Run_6667
317369 04/15/10 17:49  a-onl          Start_Run_6667,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2 (x=-3cm, y = 0)
317368 04/15/10 17:48  a-onl          Start_Run_27369,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2 (x=0,y=+0.5cm)
317367 04/15/10 17:46  a-onl          End_of_Run_27368
317366 04/15/10 17:39  aniol          septum ok
317365 04/15/10 17:37  a-onl          End_of_Run_6666
317364 04/15/10 17:34  a-onl          Start_Run_27368,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2
317363 04/15/10 17:34  a-onl          Start_Run_6666,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2
317362 04/15/10 17:34  a-onl          End_of_Run_27367
317361 04/15/10 17:33  a-onl          Start_Run_6665,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2
317360 04/15/10 17:33  a-onl          Start_Run_27367,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=start alignment study part 2
317359 04/15/10 17:32  a-onl          End_of_Run_6665
317358 04/15/10 17:28  A. Shahinyan   Target move
317357 04/15/10 17:24  aniol          septum does not come to 729A
317356 04/15/10 17:20  mcnulty        Septum on (but only at 725A)
317355 04/15/10 17:18  mcnulty        spot++
317354 04/15/10 17:15  a-onl          End_of_Run_27366
317353 04/15/10 17:13  a-onl          Start_Run_27366,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317352 04/15/10 17:10  jwexler        HVs on
317351 04/15/10 17:05  mcnulty        Sieves taken out during access
317350 04/15/10 17:04  mcnulty        Access Activity
317349 04/15/10 16:56  A. Camsonne    INFN GEMs to 4100 V
317348 04/15/10 16:54  aniol          ask for beam permit
317347 04/15/10 16:48  Folts          collimator shim
317346 04/15/10 16:45  Aniol          turned off septum
317345 04/15/10 16:44  O.Glamazdin    Moller magnet has been filled
317344 04/15/10 16:39  A. Shahinyan   Target Status
317343 04/15/10 16:36  adaq           bta not working
317342 04/15/10 16:35  A.Shahinyan    Target Status
317341 04/15/10 16:33  A. Camsonne    GEM powered on
317349  04/15/10 16:56  A. Camsonne    INFN GEMs to 4100 V
317340 04/15/10 16:30  A. Camsonne    GEM CAEN HV module power cycled and moved to another NIM slot
317339 04/15/10 16:01  adaq           Beam Time Accounting
317338 04/15/10 16:01  Holmstrom      Day Shift Summary
317337 04/15/10 15:42  mercado        LED pulse on right arm detector
317336 04/15/10 14:59  D. Parno       Target Vacuum Fluctuations (Normal)
317335 04/15/10 14:53  apar           Start_Parity_Run_2800__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317334 04/15/10 14:52  apar           End_of_Parity_Run_2799__CODA_Config=Prex
317333 04/15/10 14:49  apar           Start_Parity_Run_2799__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317332 04/15/10 14:46  apar           End_of_Parity_Run_2798__CODA_Config=Prex
317331 04/15/10 14:43  apar           Start_Parity_Run_2798__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317330 04/15/10 14:36  apar           End_of_Parity_Run_2797__CODA_Config=Prex
317329 04/15/10 14:35  apar           Start_Parity_Run_2797__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317328 04/15/10 14:31  apar           End_of_Parity_Run_2796__CODA_Config=Prex
317327 04/15/10 14:29  apar           Start_Parity_Run_2796__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317326 04/15/10 14:27  apar           Start_Parity_Run_2795__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317325 04/15/10 14:27  apar           End_of_Parity_Run_2795__CODA_Config=Prex
317324 04/15/10 14:24  apar           End_of_Parity_Run_2794__CODA_Config=Prex
317323 04/15/10 14:00  apar           Start_Parity_Run_2792__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317322 04/15/10 13:17  Guy Ron        Collimator Temperature
317321 04/15/10 12:48  A. Camsonne    GEM HV in weird state
317320 04/15/10 12:40  D. Parno       Moved to empty target
317319 04/15/10 12:39  Holmstrom      Septum back up
317318 04/15/10 12:22  silwal         first look at dithering, dets and slope/position at target
317317 04/15/10 11:49  silwal         FFB instabilities??
317316 04/15/10 11:42  mcnulty        Raster size correction II
317315 04/15/10 11:02  jwexler        Switched to counting mode
317314 04/15/10 10:44  apar           Start_Parity_Run_44611__CODA_Config=TestCrate_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=CH v2f check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317313 04/15/10 10:40  silwal         Seive IN
317312 04/15/10 10:39  apar           End_of_Parity_Run_44610__CODA_Config=TestCrate
317311 04/15/10 10:38  apar           Start_Parity_Run_44610__CODA_Config=TestCrate_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=CH v2f check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317310 04/15/10 10:29  auto_snap      Radiation and Ozone snapshot
317309 04/15/10 10:29  auto_snap      Hall A Tools snapshot
317308 04/15/10 10:29  auto_snap      Compton Polarimeter snapshot
317307 04/15/10 10:29  auto_snap      Charge Asymmetry snapshot
317306 04/15/10 10:29  auto_snap      BigBox Magnet snapshot
317305 04/15/10 10:28  auto_snap      Beam Position and Current snapshot
317304 04/15/10 10:20  Holmstrom      Turn off Septum Magnet
317303 04/15/10 10:13  silwal         CH scaler dead/not working
317302 04/15/10 09:55  apar           End_of_Parity_Run_2789__CODA_Config=Prex
317301 04/15/10 09:55  apar           Start_Parity_Run_2789__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=CH v2f check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317300 04/15/10 09:48  apar           End_of_Parity_Run_2788__CODA_Config=Prex
317299 04/15/10 09:48  apar           Start_Parity_Run_2788__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=CH v2f check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317298 04/15/10 09:41  apar           Start_Parity_Run_2787__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=CH v2f check,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317297 04/15/10 09:41  apar           End_of_Parity_Run_2787__CODA_Config=Prex
317296 04/15/10 09:07  D. Parno       Restarted Target GUI
317295 04/15/10 09:03  apar           End_of_Parity_Run_2786__CODA_Config=Prex
317294 04/15/10 08:34  silwal         first look at dithering
317318  04/15/10 12:22  silwal         first look at dithering, dets and slope/position at target
317293 04/15/10 08:31  apar           Start_Parity_Run_2786__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=septum on, RHWP @ 2350,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317292 04/15/10 08:27  silwal         RHWP back @ 2350, and feedback on
317291 04/15/10 08:26  apar           End_of_Parity_Run_2785__CODA_Config=Prex
317290 04/15/10 08:22  D. Parno       Target tools
317289 04/15/10 08:07  adaq           Beam Time Accounting
317288 04/15/10 08:03  silwal         new 50K 50uA thick Carbon Quartz voltages
317287 04/15/10 07:59  apar           Start_Parity_Run_2785__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=septum on, RHWP @ 2900,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317286 04/15/10 07:58  apar           End_of_Parity_Run_2784__CODA_Config=Prex
317285 04/15/10 07:57  silwal         RHWP @ 2900 for big charge asym run, feedback turned off
317284 04/15/10 07:55  M. Jen         4/15/10 Owl Shift Summery
317283 04/15/10 07:49  apar           Start_Parity_Run_2784__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=septum on, Quartz HV adjust,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317282 04/15/10 07:48  apar           End_of_Parity_Run_2783__CODA_Config=Prex
317281 04/15/10 07:37  silwal         50uA Thick Carbon run summary/dithering checkout
317280 04/15/10 07:32  apar           Start_Parity_Run_2783__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=septum on, Quartz HV adjust,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317279 04/15/10 07:30  apar           End_of_Parity_Run_2782__CODA_Config=Prex
317278 04/15/10 07:09  apar           Start_Parity_Run_2782__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=septum on, dithering checkout,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317277 04/15/10 07:07  apar           End_of_Parity_Run_2781__CODA_Config=Prex
317276 04/15/10 06:48  apar           Start_Parity_Run_2781__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=septum on, lumi HV checkout,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317275 04/15/10 06:48  M. Jen         turn the septum on; change Lumi HV for Septum on w/ 50uA on thick Carbon target
317274 04/15/10 06:35  apar           End_of_Parity_Run_2780__CODA_Config=Prex
317273 04/15/10 06:14  apar           Start_Parity_Run_2780__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=septum off, dithering on,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317272 04/15/10 05:54  apar           Start_Parity_Run_2779__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=long run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317271 04/15/10 05:53  apar           End_of_Parity_Run_2778__CODA_Config=Prex
317270 04/15/10 05:50  apar           Start_Parity_Run_2778__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=dithering checkout,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317269 04/15/10 05:45  apar           End_of_Parity_Run_2777__CODA_Config=Prex
317268 04/15/10 05:44  apar           Start_Parity_Run_2777__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=dithering checkout,dithering_magnet=on,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317267 04/15/10 05:39  apar           End_of_Parity_Run_2776__CODA_Config=Prex
317266 04/15/10 05:35  A. Camsonne    Compton GSO HV Off
317265 04/15/10 05:34  A. Camsonne    Compton GSO HV on - Background check
317264 04/15/10 05:30  apar           Start_Parity_Run_2776__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=15 min run, septum off,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317263 04/15/10 05:28  apar           End_of_Parity_Run_2775__CODA_Config=Prex
317262 04/15/10 05:22  apar           Start_Parity_Run_2775__CODA_Config=Prex_Run_type=Test,beam_current=5-50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=lumis checkout,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317261 04/15/10 05:21  apar           End_of_Parity_Run_2774__CODA_Config=Prex
317260 04/15/10 05:18  M. Jen         Lumi HV changed for septum off w/ 50uA on thick Carbon target
317259 04/15/10 05:12  M. Jen         spot++ w/ 5uA beam, septum off
317258 04/15/10 05:12  apar           Start_Parity_Run_2774__CODA_Config=Prex_Run_type=Test,beam_current=5-50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=lumis checkout,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
317257 04/15/10 05:10  a-onl          End_of_Run_6664
317256 04/15/10 05:09  a-onl          Start_Run_6664,Run_type=Check out,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot check
317255 04/15/10 05:09  A. Camsonne    GEM configuration is slow
317254 04/15/10 05:05  silwal         50K @ 50uA on thick Carbon Quartz HVs
317253 04/15/10 05:03  silwal         90-100K @ 50uA on thick Carbon Quartz HVs
317252 04/15/10 04:59  efuchey        target move
317251 04/15/10 04:58  M. Jen         turn the septum off for the next phase
317250 04/15/10 04:58  silwal         Beam Position Scan, +-2mm in x/y on BPM4B, quick check before putting 50uA on Thick Carbon
317249 04/15/10 04:55  silwal         S0 turned off on both arms
317248 04/15/10 04:52  M. Jen         5th BPM w/ raster size 8x8
317247 04/15/10 04:52  a-onl          End_of_Run_27365
317246 04/15/10 04:50  a-onl          End_of_Run_6663
317245 04/15/10 04:49  a-onl          Start_Run_6663,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan,-2.0 mm in BPM4By
317244 04/15/10 04:49  a-onl          Start_Run_27365,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan, -2.0 mm in BPM4By
317243 04/15/10 04:46  M. Jen         4th BPM w/ raster size 8x8
317242 04/15/10 04:45  a-onl          End_of_Run_27364
317241 04/15/10 04:43  a-onl          End_of_Run_6662
317240 04/15/10 04:42  a-onl          Start_Run_27364,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan, +2.0 mm in BPM4By
317239 04/15/10 04:42  a-onl          Start_Run_6662,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan,+2.0 mm in BPM4By
317238 04/15/10 04:36  a-onl          End_of_Run_27363
317237 04/15/10 04:35  M. Jen         3rd BPM set, raster size 8x8
317236 04/15/10 04:33  a-onl          End_of_Run_6661
317235 04/15/10 04:32  a-onl          Start_Run_27363,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan, -2.0 mm in BPM4Bx
317233 04/15/10 04:27  a-onl          End_of_Run_27362
317232 04/15/10 04:27  M. Jen         2nd BPM w/ raster size 8x8
317231 04/15/10 04:27  silwal         50% deadtime @ 300 Hz, left arm spec daq
317255  04/15/10 05:09  A. Camsonne    GEM configuration is slow
317230 04/15/10 04:25  a-onl          End_of_Run_6660
317229 04/15/10 04:24  a-onl          Start_Run_27362,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan, +2.0 mm in BPM4Bx
317228 04/15/10 04:24  a-onl          Start_Run_6660,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan,+2.0 mm in BPM4Bx
317227 04/15/10 04:22  M. Jen         1st BPM w/ raster size 8x8
317226 04/15/10 04:16  a-onl          End_of_Run_27361
317225 04/15/10 04:15  a-onl          End_of_Run_6659
317224 04/15/10 04:14  a-onl          Start_Run_6659,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan
317223 04/15/10 04:14  a-onl          Start_Run_6658,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan, 
317222 04/15/10 04:14  a-onl          Start_Run_27361,Run_type=Check out,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=Beam Position Scan, 
317221 04/15/10 04:14  a-onl          End_of_Run_6658
317220 04/15/10 04:09  silwal         S0 turned on, both arms
317219 04/15/10 04:02  M. Jen         turn the septum on for dithering test with different BPM conditions
317218 04/15/10 04:00  efuchey        target move
317217 04/15/10 03:48  M. Jen         integration mode: 5uA, raster on, septum off
317216 04/15/10 03:44  a-onl          End_of_Run_27360
317215 04/15/10 03:41  a-onl          Start_Run_27360,Run_type=Spot++,target_type=Thick C12,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317214 04/15/10 03:39  M. Jen         turn the Septum off before asking 5uA beam back
317213 04/15/10 03:38  mcnulty        Target theta vs detector y at 1.8m
317212 04/15/10 03:36  efuchey        target move
317211 04/15/10 03:33  mcnulty        Target Angles
317210 04/15/10 03:33  a-onl          End_of_Run_6657
317209 04/15/10 03:31  apar           End_of_Parity_Run_2773__CODA_Config=Prex
317208 04/15/10 03:30  ZAFAR AHMED    Cavity Pregains and Phases
317207 04/15/10 03:30  mcnulty        xy focal plane dists for both arms
317206 04/15/10 03:28  apar           Start_Parity_Run_2773__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=off,comment_text=cavity setup, 50 uA, no raster,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317205 04/15/10 03:27  apar           End_of_Parity_Run_2772__CODA_Config=Prex
317204 04/15/10 03:26  mcnulty        Larm alignment (not complete)
317203 04/15/10 03:24  a-onl          Start_Run_6657,Run_type=Calibration,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
317202 04/15/10 03:24  a-onl          End_of_Run_6656
317201 04/15/10 03:17  apar           Start_Parity_Run_2772__CODA_Config=Prex_Run_type=Test,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=off,comment_text=cavity setup, 50 uA, no raster,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317200 04/15/10 03:15  a-onl          Start_Run_6656,Run_type=Calibration,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=50,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=cavity test
317199 04/15/10 03:12  mcnulty        Raster size correction
317198 04/15/10 03:11  A. Camsonne    Current GEM database and mapping
317197 04/15/10 03:09  A. Camsonne    Current GEM database and mapping
317196 04/15/10 03:08  silwal         spot++, 3x4mm, run # 27359
317195 04/15/10 03:07  A. Camsonne    Current GEM database and mapping
317194 04/15/10 03:06  mcnulty        Rarm alignment (not complete)
317193 04/15/10 03:06  M. Jen         Hall-A General Tools
317192 04/15/10 03:06  jwexler        HV map for integrating mode, thick Pb and C running.
317191 04/15/10 03:05  a-onl          End_of_Run_27359
317190 04/15/10 03:03  A. Camsonne    GEM run list
317189 04/15/10 03:01  a-onl          Start_Run_27359,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317188 04/15/10 02:59  efuchey        target move
317187 04/15/10 02:53  A. Camsonne    GEM HV off
317186 04/15/10 02:49  mcnulty        Quartz signals
317185 04/15/10 02:44  jwexler        Late Entry - VDC, s0, upper scint. off.
317187  04/15/10 02:53  A. Camsonne    GEM HV off
317184 04/15/10 02:28  auto_snap      Radiation and Ozone snapshot
317183 04/15/10 02:28  auto_snap      Hall A Tools snapshot
317182 04/15/10 02:28  auto_snap      Compton Polarimeter snapshot
317181 04/15/10 02:28  auto_snap      Charge Asymmetry snapshot
317180 04/15/10 02:28  auto_snap      BigBox Magnet snapshot
317179 04/15/10 02:28  auto_snap      Beam Position and Current snapshot
317178 04/15/10 02:05  mcnulty        Activity during earlier access
317177 04/15/10 01:59  a-onl          End_of_Run_27358
317176 04/15/10 01:53  jwexler        Det. positions and encoder notes
317175 04/15/10 01:43  a-onl          Start_Run_27358,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment (x=-4cm)
317174 04/15/10 01:42  a-onl          Start_Run_6655,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment x=-4cm (didn't move)
317173 04/15/10 01:42  a-onl          End_of_Run_6655
317172 04/15/10 01:28  a-onl          End_of_Run_6654
317171 04/15/10 01:28  a-onl          End_of_Run_6654
317170 04/15/10 01:23  a-onl          Start_Run_6654,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment x=-4cm
317169 04/15/10 01:18  a-onl          End_of_Run_6653
317168 04/15/10 01:14  a-onl          End_of_Run_27357
317167 04/15/10 01:12  a-onl          Start_Run_6653,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment x=-2cm
317166 04/15/10 01:12  a-onl          Start_Run_27357,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment (x=-2cm)
317165 04/15/10 00:58  a-onl          End_of_Run_6652
317164 04/15/10 00:58  a-onl          End_of_Run_27356
317163 04/15/10 00:56  a-onl          Start_Run_6652,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment part 2
317162 04/15/10 00:55  a-onl          Start_Run_27356,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.05,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=quartz alignment part 2
317161 04/15/10 00:54  mcnulty        spot++ raster size check
317160 04/15/10 00:50  a-onl          End_of_Run_6651
317159 04/15/10 00:48  fuchey         tqrget move
317158 04/15/10 00:47  M. Jen         Hall-A General Tool
317157 04/15/10 00:43  a-onl          End_of_Run_27355
317156 04/15/10 00:41  a-onl          Start_Run_27355,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=on,beam_current=5,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317155 04/15/10 00:37  a-onl          End_of_Run_6651
317154 04/15/10 00:37  a-onl          End_of_Run_27354
317153 04/15/10 00:33  efuchey        Target move
317152 04/15/10 00:24  a-onl          Start_Run_6651,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=test
317151 04/15/10 00:24  a-onl          Start_Run_27354,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=test
317150 04/15/10 00:24  a-onl          End_of_Run_27353
317149 04/15/10 00:22  efuchey        Screenshots: NewDesign and Cryostat
317148 04/15/10 00:01  adaq           Beam Time Accounting

Wednesday

317147 04/14/10 23:50  Carlos         Swing shift summary
317146 04/14/10 23:20  A . Camsonne   GEM HV lowered
317145 04/14/10 23:03  A. Camsonne    GEM HV unplugged and replugged USB cable to laptop
317144 04/14/10 22:57  A. Camsonne    GEM HV ( slightly more readable )
317143 04/14/10 22:26  a-onl          Start_Run_6650,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317142 04/14/10 22:26  a-onl          Start_Run_27353,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317141 04/14/10 22:25  a-onl          End_of_Run_27352
317140 04/14/10 22:25  a-onl          End_of_Run_6649
317139 04/14/10 22:25  a-onl          Start_Run_27352,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
317138 04/14/10 22:24  a-onl          End_of_Run_27351
317137 04/14/10 22:13  a-onl          End_of_Run_27351
317136 04/14/10 22:13  a-onl          Start_Run_27351,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz moved -2cm in y and +4cm in x
317135 04/14/10 22:08  a-onl          Start_Run_27350,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz moved -2cm in y and +2cm in x
317134 04/14/10 22:07  a-onl          End_of_Run_27349
317133 04/14/10 22:01  a-onl          Start_Run_27349,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz moved to +4cm in y
317132 04/14/10 22:01  a-onl          End_of_Run_27348
317131 04/14/10 21:50  a-onl          Start_Run_27348,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz moved to +2cm in x and +2cm in y
317130 04/14/10 21:47  a-onl          End_of_Run_27347
317129 04/14/10 21:45  a-onl          End_of_Run_6648
317128 04/14/10 21:36  a-onl          Start_Run_27347,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz moved to -2cm in x
317127 04/14/10 21:36  a-onl          Start_Run_6648,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz moved to -2cm in x
317126 04/14/10 21:35  a-onl          End_of_Run_6647
317124 04/14/10 21:28  a-onl          Start_Run_6647,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz (positions back to nominal)
317123 04/14/10 21:28  a-onl          Start_Run_27346,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz (positions back to nominal)
317122 04/14/10 21:28  a-onl          End_of_Run_27345
317120 04/14/10 21:28  a-onl          Start_Run_6646,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz (positions back to nominal)
317119 04/14/10 21:28  a-onl          Start_Run_27345,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.04,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz (positions back to nominal)
317316  04/15/10 11:42  mcnulty        Raster size correction II
317118 04/14/10 21:01  a-onl          End_of_Run_27344
317117 04/14/10 21:01  a-onl          End_of_Run_6645
317116 04/14/10 20:59  jwexler        Detectors moved (again)
317115 04/14/10 20:57  a-onl          Start_Run_27344,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.002,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz (moved -4cm in x, and +2cm in y)
317114 04/14/10 20:57  a-onl          Start_Run_6645,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.002,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz (moved -4cm in x and +2cm in y)
317113 04/14/10 20:53  a-onl          End_of_Run_27343
317112 04/14/10 20:53  a-onl          End_of_Run_6644
317111 04/14/10 20:47  jwexler        Main det. moved
317110 04/14/10 20:45  a-onl          Start_Run_6644,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.002,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz (moved +4cm in x)
317109 04/14/10 20:45  a-onl          Start_Run_27343,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.002,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz (moved +4cm in x)
317108 04/14/10 20:43  a-onl          End_of_Run_27342
317107 04/14/10 20:43  benesch        spot++ at target suggests different ratio for x,y raster
317106 04/14/10 20:41  a-onl          End_of_Run_6643
317105 04/14/10 20:27  a-onl          Start_Run_27342,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=0.002,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz
317104 04/14/10 20:27  a-onl          Start_Run_6643,Run_type=Calibration,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=on,beam_current=0.002,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=starting alignment of quartz
317103 04/14/10 20:18  jwexler        s0, T5 and quartz turned on
317102 04/14/10 20:10  jwexler        VDCs turned on
317101 04/14/10 19:54  a-onl          Start_Run_27341,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317100 04/14/10 19:51  Carlos         Raster & spot++ confusion
317099 04/14/10 19:48  a-onl          End_of_Run_27340
317098 04/14/10 19:48  Apar           spot++ after adjustment
317107  04/14/10 20:43  benesch        spot++ at target suggests different ratio for x,y raster
317097 04/14/10 19:45  a-onl          Start_Run_27340,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317096 04/14/10 19:45  a-onl          End_of_Run_27339
317095 04/14/10 19:44  Apar           spot++ result
317094 04/14/10 19:41  a-onl          Start_Run_27339,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317093 04/14/10 19:40  a-onl          End_of_Run_27338
317092 04/14/10 19:38  a-onl          Start_Run_27338,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317091 04/14/10 19:37  a-onl          End_of_Run_27337
317090 04/14/10 19:34  Apar           Spot++ result
317089 04/14/10 19:26  a-onl          Start_Run_27337,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
317088 04/14/10 19:22  adaq           Harp scan result for HA1H04B
317087 04/14/10 19:21  adaq           Harp scan results for HA1H04A
317086 04/14/10 18:28  auto_snap      Radiation and Ozone snapshot
317085 04/14/10 18:28  auto_snap      Hall A Tools snapshot
317084 04/14/10 18:28  auto_snap      Compton Polarimeter snapshot
317083 04/14/10 18:28  auto_snap      Charge Asymmetry snapshot
317082 04/14/10 18:28  auto_snap      BigBox Magnet snapshot
317081 04/14/10 18:28  auto_snap      Beam Position and Current snapshot
317080 04/14/10 16:42  apar           End_of_Parity_Run_2770__CODA_Config=Prex
317079 04/14/10 16:41  A. Camsonne    GEM cabling / mapping
317078 04/14/10 16:36  apar           Start_Parity_Run_2770__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - bottom detector - good run HV940,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317077 04/14/10 16:35  a-onl          End_of_Run_27336
317076 04/14/10 16:34  a-onl          Start_Run_27336,Run_type=Pedestal,target_type=BeO,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM pedestal run
317075 04/14/10 16:28  Kiadtisak      GEM's HV cables
317079  04/14/10 16:41  A. Camsonne    GEM cabling / mapping
317144  04/14/10 22:57  A. Camsonne    GEM HV ( slightly more readable )
317145  04/14/10 23:03  A. Camsonne    GEM HV unplugged and replugged USB cable to laptop
317195  04/15/10 03:07  A. Camsonne    Current GEM database and mapping
317197  04/15/10 03:09  A. Camsonne    Current GEM database and mapping
317198  04/15/10 03:11  A. Camsonne    Current GEM database and mapping
317074 04/14/10 16:25  apar           End_of_Parity_Run_2769__CODA_Config=Prex
317073 04/14/10 16:20  aniol          target is cold, screen shots
317072 04/14/10 16:19  apar           Start_Parity_Run_2769__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - bottom detector - good run HV940,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317071 04/14/10 16:14  apar           Start_Parity_Run_2767__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - set up bottom detector,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317070 04/14/10 16:14  apar           Start_Parity_Run_2766__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - set up bottom detector,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317068 04/14/10 16:13  apar           End_of_Parity_Run_2766__CODA_Config=Prex
317067 04/14/10 16:13  apar           End_of_Parity_Run_2767__CODA_Config=Prex
317065 04/14/10 15:58  O.Glamazdin    Moller magnet has been filled
317064 04/14/10 15:51  a-onl          Start_Run_27335,Run_type=Other,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM checkout
317063 04/14/10 15:50  a-onl          End_of_Run_27334
317062 04/14/10 15:49  a-onl          Start_Run_27334,Run_type=Other,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=GEM checkout
317061 04/14/10 15:24  jpchen         Alarm limits set.
317060 04/14/10 15:21  jpchen         target crystat screen
317059 04/14/10 15:19  jpchen         Target cool-down completed
317058 04/14/10 15:16  apar           Start_Parity_Run_2765__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - set up bottom detector,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317057 04/14/10 15:15  apar           End_of_Parity_Run_2765__CODA_Config=Prex
317056 04/14/10 15:06  Jack (Techs)   Tungsten o-ring shield
317393  04/15/10 18:36  Jack (Techs)   Thermocouple on the beampipe - readout channel corrected
317055 04/14/10 14:32  apar           End_of_Parity_Run_2764__CODA_Config=Prex
317054 04/14/10 14:27  apar           Start_Parity_Run_2764__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run at H575 - bigger pulse,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317053 04/14/10 14:16  apar           End_of_Parity_Run_2763__CODA_Config=Prex
317052 04/14/10 14:11  apar           Start_Parity_Run_2763__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run at HV605 - bigger pulse,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317051 04/14/10 13:57  folts          checklist/tech
317050 04/14/10 13:30  apar           End_of_Parity_Run_2762__CODA_Config=Prex
317049 04/14/10 13:24  apar           Start_Parity_Run_2762__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run at HV605 - bigger pulse,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317048 04/14/10 13:18  apar           End_of_Parity_Run_2761__CODA_Config=Prex
317047 04/14/10 13:13  apar           Start_Parity_Run_2761__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run at HV605 - bigger pulse,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317046 04/14/10 13:12  apar           Start_Parity_Run_2760__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - set up pulse,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317045 04/14/10 13:11  apar           End_of_Parity_Run_2760__CODA_Config=Prex
317044 04/14/10 12:52  apar           End_of_Parity_Run_2759__CODA_Config=Prex
317043 04/14/10 12:46  apar           Start_Parity_Run_2759__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run at HV=605,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317042 04/14/10 12:41  apar           End_of_Parity_Run_2758__CODA_Config=Prex
317041 04/14/10 12:35  apar           Start_Parity_Run_2758__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run at HV=605,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317040 04/14/10 12:34  apar           Start_Parity_Run_2757__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run at HV=605,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317039 04/14/10 12:34  apar           End_of_Parity_Run_2757__CODA_Config=Prex
317038 04/14/10 12:32  apar           End_of_Parity_Run_2756__CODA_Config=Prex
317037 04/14/10 12:30  apar           Start_Parity_Run_2756__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - set lower HV,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317036 04/14/10 12:23  apar           End_of_Parity_Run_2755__CODA_Config=Prex
317035 04/14/10 12:17  apar           Start_Parity_Run_2755__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317034 04/14/10 12:16  jwexler        Lower Left Detector Repairs
317033 04/14/10 11:49  apar           End_of_Parity_Run_2754__CODA_Config=Prex
317032 04/14/10 11:48  R. Michaels    scaler fixes; added 2nd clock
317031 04/14/10 11:39  apar           Start_Parity_Run_2754__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317030 04/14/10 11:14  R. Michaels    plugged in T8 on R-HRS
317029 04/14/10 11:12  a-onl          End_of_Run_6642
317028 04/14/10 11:05  a-onl          Start_Run_6642,Run_type=Cosmics,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=test 
317027 04/14/10 10:58  apar           End_of_Parity_Run_2753__CODA_Config=Prex
317026 04/14/10 10:51  apar           Start_Parity_Run_2753__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317025 04/14/10 10:48  folts          Magnets Ramped down
317024 04/14/10 10:43  apar           End_of_Parity_Run_2752__CODA_Config=Prex
317023 04/14/10 10:37  apar           Start_Parity_Run_2752__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317022 04/14/10 10:34  LeRose         Radiation Monitoring
317021 04/14/10 10:32  apar           End_of_Parity_Run_2751__CODA_Config=Prex
317020 04/14/10 10:28  auto_snap      Radiation and Ozone snapshot
317019 04/14/10 10:28  auto_snap      Hall A Tools snapshot
317018 04/14/10 10:28  auto_snap      Compton Polarimeter snapshot
317017 04/14/10 10:28  auto_snap      Charge Asymmetry snapshot
317016 04/14/10 10:28  auto_snap      BigBox Magnet snapshot
317015 04/14/10 10:27  auto_snap      Beam Position and Current snapshot
317014 04/14/10 10:26  apar           Start_Parity_Run_2751__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up linearity on right arm,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317013 04/14/10 10:21  LeRose         Radiation Monitoring
317022  04/14/10 10:34  LeRose         Radiation Monitoring
317012 04/14/10 10:00  apar           Start_Parity_Run_2750__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=?????,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317011 04/14/10 02:27  auto_snap      Radiation and Ozone snapshot
317010 04/14/10 02:27  auto_snap      Hall A Tools snapshot
317009 04/14/10 02:27  auto_snap      Compton Polarimeter snapshot
317008 04/14/10 02:27  auto_snap      Charge Asymmetry snapshot
317007 04/14/10 02:27  auto_snap      BigBox Magnet snapshot
317006 04/14/10 02:27  auto_snap      Beam Position and Current snapshot
317005 04/14/10 00:49  M Friend       raster off

Tuesday

317004 04/13/10 23:39  jwexler        Left arm quartz detectors turned off
317003 04/13/10 22:43  apar           End_of_Parity_Run_2749__CODA_Config=Prex
317002 04/13/10 22:37  apar           Start_Parity_Run_2749__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=?????,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
317001 04/13/10 22:01  apar           End_of_Parity_Run_2748__CODA_Config=Prex
317000 04/13/10 21:48  apar           Start_Parity_Run_2748__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=rupesh tests, no beam,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316999 04/13/10 18:27  auto_snap      Radiation and Ozone snapshot
316998 04/13/10 18:27  auto_snap      Hall A Tools snapshot
316997 04/13/10 18:27  auto_snap      Compton Polarimeter snapshot
316996 04/13/10 18:27  auto_snap      Charge Asymmetry snapshot
316995 04/13/10 18:27  auto_snap      BigBox Magnet snapshot
316994 04/13/10 18:27  auto_snap      Beam Position and Current snapshot
316993 04/13/10 18:10  jwexler        Quartz dets. back to HRS DAQ
316992 04/13/10 17:13  Bob/Rupesh     investigation of slow E tree data
316991 04/13/10 17:07  apar           End_of_Parity_Run_2746__CODA_Config=Prex
316990 04/13/10 16:55  apar           Start_Parity_Run_2746__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=rupesh tests,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316989 04/13/10 16:40  apar           End_of_Parity_Run_2745__CODA_Config=Prex
316988 04/13/10 16:34  apar           Start_Parity_Run_2745__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=show big nonlinearity - HV=525 - crosstalk test #3,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316987 04/13/10 16:33  A. Camsonne    GEM cosmics run 1095
316986 04/13/10 16:31  apar           End_of_Parity_Run_2744__CODA_Config=Prex
316985 04/13/10 16:26  apar           Start_Parity_Run_2744__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=show big nonlinearity - HV=525 - crosstalk test #2,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316984 04/13/10 16:24  apar           End_of_Parity_Run_2743__CODA_Config=Prex
316983 04/13/10 16:19  apar           Start_Parity_Run_2743__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=show big nonlinearity - HV=525 - crosstalk test #1,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316982 04/13/10 15:10  O.Glamazdin    Moller magnet has been filled
316981 04/13/10 14:32  apar           End_of_Parity_Run_2742__CODA_Config=Prex
316980 04/13/10 14:26  apar           Start_Parity_Run_2742__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=show big nonlinearity - HV=525,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316979 04/13/10 14:24  apar           End_of_Parity_Run_2741__CODA_Config=Prex
316978 04/13/10 14:23  apar           Start_Parity_Run_2741__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=show big nonlinearity - HV=525,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316977 04/13/10 14:22  apar           End_of_Parity_Run_2740__CODA_Config=Prex
316976 04/13/10 14:16  apar           Start_Parity_Run_2740__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=show big nonlinearity - HV=525,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316975 04/13/10 14:15  apar           Start_Parity_Run_2739__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=get 10nA signal,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316974 04/13/10 14:15  apar           Start_Parity_Run_2738__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=get 10nA signal,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316973 04/13/10 14:15  apar           Start_Parity_Run_2737__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=get 10nA signal,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316972 04/13/10 14:15  apar           Start_Parity_Run_2736__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=get 10nA signal,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316971 04/13/10 14:15  apar           Start_Parity_Run_2735__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=get 10nA signal,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316970 04/13/10 14:15  apar           Start_Parity_Run_2734__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=get 10nA signal,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316969 04/13/10 14:15  apar           End_of_Parity_Run_2739__CODA_Config=Prex
316968 04/13/10 14:15  apar           End_of_Parity_Run_2738__CODA_Config=Prex
316967 04/13/10 14:15  apar           End_of_Parity_Run_2737__CODA_Config=Prex
316966 04/13/10 14:15  apar           End_of_Parity_Run_2736__CODA_Config=Prex
316965 04/13/10 14:15  apar           End_of_Parity_Run_2735__CODA_Config=Prex
316964 04/13/10 14:14  apar           End_of_Parity_Run_2734__CODA_Config=Prex
316963 04/13/10 14:14  apar           End_of_Parity_Run_2733__CODA_Config=Prex
316962 04/13/10 13:03  apar           Start_Parity_Run_2733__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=get 10nA signal,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316961 04/13/10 13:00  apar           End_of_Parity_Run_2732__CODA_Config=Prex
316960 04/13/10 12:54  apar           Start_Parity_Run_2732__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=re-establish signals,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316959 04/13/10 12:45  apar           End_of_Parity_Run_2729__CODA_Config=Prex
316958 04/13/10 12:44  apar           Start_Parity_Run_2729__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=re-establish signals,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316957 04/13/10 12:33  apar           End_of_Parity_Run_2728__CODA_Config=Prex
316956 04/13/10 12:23  apar           Start_Parity_Run_2728__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=re-establish signals,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316955 04/13/10 12:12  apar           End_of_Parity_Run_2727__CODA_Config=Prex
316954 04/13/10 12:02  apar           Start_Parity_Run_2727__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=re-establish signals,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316953 04/13/10 11:49  apar           End_of_Parity_Run_2726__CODA_Config=Prex
316952 04/13/10 11:46  apar           Start_Parity_Run_2726__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom left - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316951 04/13/10 11:20  mcnulty        switched quartz signals to HRS DAQ
316950 04/13/10 10:27  auto_snap      Radiation and Ozone snapshot
316949 04/13/10 10:27  auto_snap      Hall A Tools snapshot
316948 04/13/10 10:27  auto_snap      Compton Polarimeter snapshot
316947 04/13/10 10:27  auto_snap      Charge Asymmetry snapshot
316946 04/13/10 10:27  auto_snap      BigBox Magnet snapshot
316945 04/13/10 10:26  auto_snap      Beam Position and Current snapshot
316944 04/13/10 09:22  R. Michaels    hypothesis for why O-ring failed
316943 04/13/10 02:26  auto_snap      Radiation and Ozone snapshot
316942 04/13/10 02:26  auto_snap      Hall A Tools snapshot
316941 04/13/10 02:26  auto_snap      Compton Polarimeter snapshot
316940 04/13/10 02:26  auto_snap      Charge Asymmetry snapshot
316939 04/13/10 02:26  auto_snap      BigBox Magnet snapshot
316938 04/13/10 02:26  auto_snap      Beam Position and Current snapshot

Monday

316937 04/12/10 18:26  auto_snap      Radiation and Ozone snapshot
316936 04/12/10 18:26  auto_snap      Hall A Tools snapshot
316935 04/12/10 18:26  auto_snap      Compton Polarimeter snapshot
316934 04/12/10 18:26  auto_snap      Charge Asymmetry snapshot
316933 04/12/10 18:26  auto_snap      BigBox Magnet snapshot
316932 04/12/10 18:26  auto_snap      Beam Position and Current snapshot
316931 04/12/10 16:59  adaq           Beam Time Accounting
316930 04/12/10 16:27  R. Michaels    about O-rings
316944  04/13/10 09:22  R. Michaels    hypothesis for why O-ring failed
316929 04/12/10 15:38  O.Glamazdin    Moller magnet has been filled
316928 04/12/10 15:02  apar           Start_Parity_Run_2724__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom left - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316927 04/12/10 15:01  apar           End_of_Parity_Run_2723__CODA_Config=Prex
316926 04/12/10 14:58  jwexler        Linearity signal before cable swap
316925 04/12/10 14:55  apar           Start_Parity_Run_2723__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom left - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316924 04/12/10 14:52  apar           End_of_Parity_Run_2722__CODA_Config=Prex
316923 04/12/10 14:41  apar           Start_Parity_Run_2722__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom left - get DAC values,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316922 04/12/10 14:40  apar           End_of_Parity_Run_2721__CODA_Config=Prex
316921 04/12/10 14:35  apar           Start_Parity_Run_2721__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom left - get pulse right,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316920 04/12/10 14:19  mercado        Swapped LEDs. Now get ribbon signals! Added figures..
316919 04/12/10 14:14  mercado        Swapped LEDs. Now get ribbon signals!
316920 04/12/10 14:19  mercado        Swapped LEDs. Now get ribbon signals! Added figures..
316918 04/12/10 13:45  apar           End_of_Parity_Run_2720__CODA_Config=Prex
316917 04/12/10 13:44  mercado        Lumi Pedestals - Light Leaks?
316916 04/12/10 13:41  apar           Start_Parity_Run_2720__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top left - lumi ramp,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316915 04/12/10 13:38  apar           End_of_Parity_Run_2719__CODA_Config=Prex
316914 04/12/10 13:31  apar           Start_Parity_Run_2719__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top left - switched LEDs - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316913 04/12/10 13:24  apar           End_of_Parity_Run_2718__CODA_Config=Prex
316912 04/12/10 13:20  apar           Start_Parity_Run_2718__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top left - switched LEDs - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316911 04/12/10 13:17  apar           End_of_Parity_Run_2717__CODA_Config=Prex
316910 04/12/10 13:10  apar           Start_Parity_Run_2717__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top left - switched LEDs - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316909 04/12/10 13:08  apar           End_of_Parity_Run_2716__CODA_Config=Prex
316908 04/12/10 13:02  apar           Start_Parity_Run_2716__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - get DAC values - top left - switched LEDs,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316907 04/12/10 13:01  apar           End_of_Parity_Run_2715__CODA_Config=Prex
316906 04/12/10 12:50  apar           Start_Parity_Run_2715__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - get DAC values - top left - switched LEDs,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316905 04/12/10 12:49  apar           End_of_Parity_Run_2714__CODA_Config=Prex
316904 04/12/10 12:37  apar           Start_Parity_Run_2714__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - get DAC values - top left - switched LEDs,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316903 04/12/10 12:34  apar           End_of_Parity_Run_2713__CODA_Config=Prex
316901 04/12/10 12:30  apar           Start_Parity_Run_2712__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316902 04/12/10 12:30  apar           Start_Parity_Run_2711__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316900 04/12/10 12:30  apar           Start_Parity_Run_2713__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316899 04/12/10 12:30  apar           End_of_Parity_Run_2711__CODA_Config=Prex
316898 04/12/10 12:30  apar           End_of_Parity_Run_2712__CODA_Config=Prex
316897 04/12/10 11:43  apar           End_of_Parity_Run_2710__CODA_Config=Prex
316896 04/12/10 11:30  apar           Start_Parity_Run_2710__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316895 04/12/10 11:29  apar           End_of_Parity_Run_2709__CODA_Config=Prex
316894 04/12/10 11:18  apar           Start_Parity_Run_2709__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316893 04/12/10 11:17  apar           End_of_Parity_Run_2708__CODA_Config=Prex
316892 04/12/10 11:04  apar           Start_Parity_Run_2708__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316891 04/12/10 10:42  apar           End_of_Parity_Run_2707__CODA_Config=Prex
316890 04/12/10 10:32  apar           Start_Parity_Run_2707__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316889 04/12/10 10:29  apar           Start_Parity_Run_2706__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316888 04/12/10 10:26  auto_snap      Radiation and Ozone snapshot
316887 04/12/10 10:26  auto_snap      Hall A Tools snapshot
316886 04/12/10 10:26  auto_snap      Compton Polarimeter snapshot
316885 04/12/10 10:26  auto_snap      Charge Asymmetry snapshot
316884 04/12/10 10:25  auto_snap      BigBox Magnet snapshot
316883 04/12/10 10:25  auto_snap      Beam Position and Current snapshot
316882 04/12/10 09:56  apar           End_of_Parity_Run_2705__CODA_Config=Prex
316881 04/12/10 09:53  apar           Start_Parity_Run_2705__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=et insert test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316880 04/12/10 09:49  apar           Start_Parity_Run_2704__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=et insert test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316879 04/12/10 09:49  apar           End_of_Parity_Run_2704__CODA_Config=Prex
316878 04/12/10 02:25  auto_snap      Radiation and Ozone snapshot
316877 04/12/10 02:25  auto_snap      Hall A Tools snapshot
316876 04/12/10 02:25  auto_snap      Compton Polarimeter snapshot
316875 04/12/10 02:25  auto_snap      Charge Asymmetry snapshot
316874 04/12/10 02:25  auto_snap      BigBox Magnet snapshot
316873 04/12/10 02:25  auto_snap      Beam Position and Current snapshot

Sunday

316872 04/11/10 23:35  Abdurahim      Searching for optimized DOCP state at the CIP
316871 04/11/10 18:25  auto_snap      Radiation and Ozone snapshot
316870 04/11/10 18:25  auto_snap      Hall A Tools snapshot
316869 04/11/10 18:25  auto_snap      Compton Polarimeter snapshot
316868 04/11/10 18:25  auto_snap      Charge Asymmetry snapshot
316867 04/11/10 18:25  auto_snap      BigBox Magnet snapshot
316866 04/11/10 18:25  auto_snap      Beam Position and Current snapshot
316865 04/11/10 13:21  O.Glamazdin    Moller magnet has been filled
316864 04/11/10 12:37  apar           End_of_Parity_Run_2701__CODA_Config=Prex
316863 04/11/10 12:19  apar           Start_Parity_Run_2701__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom detector on left arm - run to take picture of scope trace,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316862 04/11/10 11:55  apar           End_of_Parity_Run_2700__CODA_Config=Prex
316861 04/11/10 11:51  apar           Start_Parity_Run_2700__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom detector on left arm - good run HV860,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316860 04/11/10 11:49  apar           End_of_Parity_Run_2699__CODA_Config=Prex
316859 04/11/10 11:41  apar           Start_Parity_Run_2699__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom detector on left arm - good run HV860,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316858 04/11/10 11:38  apar           End_of_Parity_Run_2698__CODA_Config=Prex
316857 04/11/10 11:32  apar           Start_Parity_Run_2698__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom detector on left arm - set up DAC values,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316856 04/11/10 11:31  apar           Start_Parity_Run_2697__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - bottom detector on left arm - set up pulse,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316855 04/11/10 11:31  apar           End_of_Parity_Run_2697__CODA_Config=Prex
316854 04/11/10 11:20  apar           End_of_Parity_Run_2696__CODA_Config=Prex
316853 04/11/10 11:16  apar           Start_Parity_Run_2696__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm - good run HV810,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316852 04/11/10 11:14  apar           End_of_Parity_Run_2695__CODA_Config=Prex
316851 04/11/10 11:10  apar           Start_Parity_Run_2695__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm - good run HV810,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316850 04/11/10 11:09  apar           End_of_Parity_Run_2694__CODA_Config=Prex
316849 04/11/10 11:03  apar           Start_Parity_Run_2694__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm - set up with HV810,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316848 04/11/10 11:00  apar           End_of_Parity_Run_2693__CODA_Config=Prex
316847 04/11/10 10:55  apar           Start_Parity_Run_2693__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316846 04/11/10 10:50  apar           End_of_Parity_Run_2692__CODA_Config=Prex
316845 04/11/10 10:44  apar           Start_Parity_Run_2692__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316844 04/11/10 10:33  apar           End_of_Parity_Run_2691__CODA_Config=Prex
316843 04/11/10 10:26  apar           Start_Parity_Run_2691__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316842 04/11/10 10:25  auto_snap      Radiation and Ozone snapshot
316841 04/11/10 10:25  auto_snap      Hall A Tools snapshot
316840 04/11/10 10:25  auto_snap      Compton Polarimeter snapshot
316839 04/11/10 10:24  auto_snap      Charge Asymmetry snapshot
316838 04/11/10 10:24  auto_snap      BigBox Magnet snapshot
316837 04/11/10 10:24  auto_snap      Beam Position and Current snapshot
316836 04/11/10 10:21  apar           End_of_Parity_Run_2690__CODA_Config=Prex
316835 04/11/10 10:16  apar           Start_Parity_Run_2690__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm - set up DAC values,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316834 04/11/10 10:14  apar           End_of_Parity_Run_2689__CODA_Config=Prex
316833 04/11/10 10:07  apar           Start_Parity_Run_2689__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316832 04/11/10 10:04  apar           End_of_Parity_Run_2688__CODA_Config=Prex
316831 04/11/10 09:57  apar           Start_Parity_Run_2688__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm - study drift,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316830 04/11/10 09:57  apar           Start_Parity_Run_2687__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity - top detector on left arm,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316829 04/11/10 09:56  apar           End_of_Parity_Run_2687__CODA_Config=Prex
316828 04/11/10 09:29  apar           End_of_Parity_Run_2686__CODA_Config=Prex
316827 04/11/10 09:20  apar           Start_Parity_Run_2686__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316826 04/11/10 02:24  auto_snap      Radiation and Ozone snapshot
316825 04/11/10 02:24  auto_snap      Hall A Tools snapshot
316824 04/11/10 02:24  auto_snap      Compton Polarimeter snapshot
316823 04/11/10 02:24  auto_snap      Charge Asymmetry snapshot
316822 04/11/10 02:24  auto_snap      BigBox Magnet snapshot
316821 04/11/10 02:24  auto_snap      Beam Position and Current snapshot

Saturday

316820 04/10/10 20:39  Abdurahim      Green Compton Cavity Power is 2.5 kW !
316819 04/10/10 18:24  auto_snap      Radiation and Ozone snapshot
316818 04/10/10 18:24  auto_snap      Hall A Tools snapshot
316817 04/10/10 18:24  auto_snap      Compton Polarimeter snapshot
316816 04/10/10 18:24  auto_snap      Charge Asymmetry snapshot
316815 04/10/10 18:24  auto_snap      BigBox Magnet snapshot
316814 04/10/10 18:24  auto_snap      Beam Position and Current snapshot
316813 04/10/10 16:13  mercado        Detector vs BCM fit - pedestal error?
316812 04/10/10 14:04  apar           End_of_Parity_Run_2685__CODA_Config=Prex
316811 04/10/10 13:59  apar           Start_Parity_Run_2685__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316810 04/10/10 13:53  apar           End_of_Parity_Run_2684__CODA_Config=Prex
316809 04/10/10 13:48  apar           Start_Parity_Run_2684__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=set up for linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316808 04/10/10 11:41  O.Glamazdin    Moller magnet has been filled
316807 04/10/10 10:24  auto_snap      Radiation and Ozone snapshot
316806 04/10/10 10:24  auto_snap      Hall A Tools snapshot
316805 04/10/10 10:24  auto_snap      Compton Polarimeter snapshot
316804 04/10/10 10:23  auto_snap      Charge Asymmetry snapshot
316803 04/10/10 10:23  auto_snap      BigBox Magnet snapshot
316802 04/10/10 10:23  auto_snap      Beam Position and Current snapshot
316801 04/10/10 02:23  auto_snap      Radiation and Ozone snapshot
316800 04/10/10 02:23  auto_snap      Hall A Tools snapshot
316799 04/10/10 02:23  auto_snap      Compton Polarimeter snapshot
316798 04/10/10 02:23  auto_snap      Charge Asymmetry snapshot
316797 04/10/10 02:23  auto_snap      BigBox Magnet snapshot
316796 04/10/10 02:23  auto_snap      Beam Position and Current snapshot

Friday

316795 04/09/10 18:23  auto_snap      Radiation and Ozone snapshot
316794 04/09/10 18:23  auto_snap      Hall A Tools snapshot
316793 04/09/10 18:23  auto_snap      Compton Polarimeter snapshot
316792 04/09/10 18:23  auto_snap      Charge Asymmetry snapshot
316791 04/09/10 18:23  auto_snap      BigBox Magnet snapshot
316790 04/09/10 18:23  auto_snap      Beam Position and Current snapshot
316789 04/09/10 17:20  apar           End_of_Parity_Run_2682__CODA_Config=Prex
316788 04/09/10 17:16  apar           Start_Parity_Run_2682__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=crosstalk test - back to normal,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316787 04/09/10 17:11  apar           End_of_Parity_Run_2681__CODA_Config=Prex
316786 04/09/10 17:06  apar           Start_Parity_Run_2681__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=crosstalk test - switched both over,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316785 04/09/10 17:00  apar           End_of_Parity_Run_2680__CODA_Config=Prex
316784 04/09/10 16:56  apar           Start_Parity_Run_2680__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=crosstalk test - switched pulse over,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316783 04/09/10 16:54  apar           End_of_Parity_Run_2679__CODA_Config=Prex
316782 04/09/10 16:51  apar           Start_Parity_Run_2679__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=crosstalk test - switched pulse over,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316781 04/09/10 16:42  apar           End_of_Parity_Run_2678__CODA_Config=Prex
316780 04/09/10 16:39  apar           Start_Parity_Run_2678__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=crosstalk test - switched baseline over,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316779 04/09/10 16:22  apar           End_of_Parity_Run_2677__CODA_Config=Prex
316778 04/09/10 16:18  apar           Start_Parity_Run_2677__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test scandata,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316777 04/09/10 16:12  apar           End_of_Parity_Run_2676__CODA_Config=Prex
316776 04/09/10 16:07  apar           Start_Parity_Run_2676__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test scandata,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316775 04/09/10 15:29  jwexler        Mapping between the root files and the BPM patch panel.
316774 04/09/10 14:58  apar           End_of_Parity_Run_2675__CODA_Config=Prex
316773 04/09/10 14:48  apar           Start_Parity_Run_2675__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test scandata,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316772 04/09/10 13:49  apar           End_of_Parity_Run_2674__CODA_Config=Prex
316771 04/09/10 13:42  apar           Start_Parity_Run_2674__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=test scandata,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316770 04/09/10 13:35  apar           End_of_Parity_Run_2673__CODA_Config=Prex
316769 04/09/10 13:26  apar           Start_Parity_Run_2673__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=linearity test - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316768 04/09/10 13:24  apar           End_of_Parity_Run_2672__CODA_Config=Prex
316767 04/09/10 13:17  apar           Start_Parity_Run_2672__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=linearity test - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316766 04/09/10 12:28  apar           Start_Parity_Run_2671__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=linearity test - good run,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316765 04/09/10 12:25  apar           End_of_Parity_Run_2670__CODA_Config=Prex
316764 04/09/10 12:12  apar           Start_Parity_Run_2670__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=linearity test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316763 04/09/10 12:04  apar           End_of_Parity_Run_2669__CODA_Config=Prex
316762 04/09/10 12:03  apar           Start_Parity_Run_2669__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=linearity test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316761 04/09/10 12:00  apar           End_of_Parity_Run_2668__CODA_Config=Prex
316760 04/09/10 11:42  apar           Start_Parity_Run_2668__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=linearity test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316759 04/09/10 11:31  apar           Start_Parity_Run_2666__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
316758 04/09/10 11:30  apar           Start_Parity_Run_2667__CODA_Config=Prex_Run_type=Test,beam_current=0,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=Linearity,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316757 04/09/10 11:27  apar           End_of_Parity_Run_2636__CODA_Config=Prex
316756 04/09/10 10:23  auto_snap      Radiation and Ozone snapshot
316755 04/09/10 10:23  auto_snap      Hall A Tools snapshot
316754 04/09/10 10:22  auto_snap      Compton Polarimeter snapshot
316753 04/09/10 10:22  auto_snap      Charge Asymmetry snapshot
316752 04/09/10 10:22  auto_snap      BigBox Magnet snapshot
316751 04/09/10 10:22  auto_snap      Beam Position and Current snapshot
316750 04/09/10 07:36  R. Subedi      Shift cancelled until Sunday Day-shift
316749 04/09/10 02:22  auto_snap      Radiation and Ozone snapshot
316748 04/09/10 02:22  auto_snap      Hall A Tools snapshot
316747 04/09/10 02:22  auto_snap      Compton Polarimeter snapshot
316746 04/09/10 02:22  auto_snap      Charge Asymmetry snapshot
316745 04/09/10 02:22  auto_snap      BigBox Magnet snapshot
316744 04/09/10 02:22  auto_snap      Beam Position and Current snapshot

Thursday

316743 04/08/10 22:29  O.Glamazdin    Moller magnet has been filled
316742 04/08/10 18:22  auto_snap      Radiation and Ozone snapshot
316741 04/08/10 18:22  auto_snap      Hall A Tools snapshot
316740 04/08/10 18:22  auto_snap      Compton Polarimeter snapshot
316739 04/08/10 18:22  auto_snap      Charge Asymmetry snapshot
316738 04/08/10 18:22  auto_snap      BigBox Magnet snapshot
316737 04/08/10 18:22  auto_snap      Beam Position and Current snapshot
316736 04/08/10 17:42  mercado        Summary of what happened during Optics Run 2642-2644
316735 04/08/10 17:38  R. Subedi      RHRS evtypebits working
316734 04/08/10 16:34  M Friend       Compton Saclay DAQ/CompSimple remote control
316733 04/08/10 15:34  a-onl          End_of_Run_6641
316732 04/08/10 15:32  a-onl          Start_Run_6641,Run_type=Cosmics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=test datamon
316731 04/08/10 14:17  jwexler        ADC & BSY BPM patch panel mapping
316729 04/08/10 11:36  dalton         Carbon optics data
316728 04/08/10 11:22  a-onl          End_of_Run_6640
316727 04/08/10 11:20  a-onl          Start_Run_6640,Run_type=Cosmics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=s2 pedestal run (5 lead glass chanels+additional cabel) 3-rd HV off
316726 04/08/10 11:14  a-onl          End_of_Run_6639
316725 04/08/10 11:13  a-onl          Start_Run_6639,Run_type=Cosmics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=s2 pedestal run (5 lead glass chanels+additional cabel)
316724 04/08/10 11:06  a-onl          End_of_Run_6638
316723 04/08/10 11:04  a-onl          Start_Run_6638,Run_type=Cosmics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=s2 pedestal run (5 lead glass chanels)
316722 04/08/10 11:00  a-onl          End_of_Run_6637
316721 04/08/10 10:56  a-onl          Start_Run_6637,Run_type=Cosmics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=s2 pedestal run (s2 chanels)
316720 04/08/10 10:52  a-onl          End_of_Run_6636
316719 04/08/10 10:51  a-onl          Start_Run_6636,Run_type=Cosmics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=s2 check
316718 04/08/10 10:48  R. Subedi      Target chamber open: 4th carbon foil broken off
316716 04/08/10 10:40  a-onl          End_of_Run_6635
316714 04/08/10 10:39  a-onl          Start_Run_6635,Run_type=Cosmics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=s2 check
316713 04/08/10 10:22  auto_snap      Radiation and Ozone snapshot
316712 04/08/10 10:21  auto_snap      Hall A Tools snapshot
316711 04/08/10 10:21  auto_snap      Compton Polarimeter snapshot
316710 04/08/10 10:21  auto_snap      Charge Asymmetry snapshot
316709 04/08/10 10:21  auto_snap      BigBox Magnet snapshot
316708 04/08/10 10:21  auto_snap      Beam Position and Current snapshot
316707 04/08/10 10:21  a-onl          End_of_Run_6634
316706 04/08/10 10:20  a-onl          Start_Run_6634,Run_type=Cosmics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=s2 check
316705 04/08/10 03:21  A. Camsonne    Late entry : GEM taken out from Left ARM
316704 04/08/10 02:21  auto_snap      Radiation and Ozone snapshot
316703 04/08/10 02:21  auto_snap      Hall A Tools snapshot
316702 04/08/10 02:21  auto_snap      Compton Polarimeter snapshot
316701 04/08/10 02:21  auto_snap      Charge Asymmetry snapshot
316700 04/08/10 02:21  auto_snap      BigBox Magnet snapshot
316699 04/08/10 02:21  auto_snap      Beam Position and Current snapshot

Wednesday

316698 04/07/10 22:51  R. Michaels    upcoming meetings for PREX
316697 04/07/10 22:40  R. Michaels    Experiment status and plans
316696 04/07/10 18:21  auto_snap      Radiation and Ozone snapshot
316695 04/07/10 18:21  auto_snap      Hall A Tools snapshot
316694 04/07/10 18:21  auto_snap      Compton Polarimeter snapshot
316693 04/07/10 18:21  auto_snap      Charge Asymmetry snapshot
316692 04/07/10 18:21  auto_snap      BigBox Magnet snapshot
316691 04/07/10 18:20  auto_snap      Beam Position and Current snapshot
316690 04/07/10 16:27  Kiadtisak      Sieve Slit Plots (Tune B)
316689 04/07/10 15:38  Fansler/Smit   Moeller
316688 04/07/10 12:28  silwal         some injector bpms dropped from the .db file, but still in the raw data file
316687 04/07/10 10:20  auto_snap      Radiation and Ozone snapshot
316686 04/07/10 10:20  auto_snap      Hall A Tools snapshot
316685 04/07/10 10:20  auto_snap      Compton Polarimeter snapshot
316684 04/07/10 10:20  auto_snap      Charge Asymmetry snapshot
316683 04/07/10 10:20  auto_snap      BigBox Magnet snapshot
316682 04/07/10 10:20  auto_snap      Beam Position and Current snapshot
316680 04/07/10 08:55  R. Subedi      Day shift canceled, swing on standby
316679 04/07/10 06:49  R. Subedi      A copy from Elog on the early AM events yesterday

Tuesday

316678 04/06/10 19:03  riordan        LQ1 liquid level dropped with beam
316677 04/06/10 16:36  O.Glamazdin    Moller magnet influence on the MBC1H01V corrector
316676 04/06/10 16:27  R. Subedi      Shift cancellation and standby
316680  04/07/10 08:55  R. Subedi      Day shift cancelled, swing on standby
316675 04/06/10 16:04  adaq           Beam Time Accounting
316674 04/06/10 16:03  Fatiha         Day Shift Summary
316673 04/06/10 16:00  jpchen         only 5 uA on lead target ealier
316672 04/06/10 15:59  Fatiha         Lecroy HV alarms 
316671 04/06/10 15:04  Fatiha         Restricted access 
316670 04/06/10 15:02  Fatiha         Hall still in controlled access 
316669 04/06/10 14:32  Fatiha         Hall is going to restricted access
316670  04/06/10 15:02  Fatiha         Hall still in controlled access 
316668 04/06/10 13:15  ZAFAR AHME     Target GUI.
316667 04/06/10 12:49  Fatiha         Hall A General tools
316666 04/06/10 12:42  Fatiha         1/2 Day Shift Summary
316665 04/06/10 12:42  dalton         Shift Summary Owl
316664 04/06/10 12:39  pking          Beam current and radiation monitor levels from archiver; comparison to target motion logs
316678 04/06/10 19:03  riordan        LQ1 liquid level dropped with beam
316663 04/06/10 12:33  O. Glamazdin   Moller magnet is full with LHe
316662 04/06/10 12:32  jpchen         Chamber vacuum bad, suspect leak.
316661 04/06/10 12:09  Fatiha         More people in the hall 
316660 04/06/10 11:52  Fatiha         A couple of people in the hall 
316659 04/06/10 11:22  jpchen         scattering chamber vacuum still bad
316658 04/06/10 10:29  Fatiha         Askd for a controlled access 
316657 04/06/10 10:20  R. Michaels    no thin lead in beam, please !
316656 04/06/10 09:50  jpchen         Moved to BeO
316655 04/06/10 09:44  jpchen         beam on thick 12C target caused the vacuum bad
316673  04/06/10 16:00  jpchen         only 5 uA on lead target ealier
316654 04/06/10 09:37  Moffit         bpm saturation cuts in multirun analysis
316653 04/06/10 08:58  auto_snap      Radiation and Ozone snapshot
316652 04/06/10 08:58  auto_snap      Hall A Tools snapshot
316651 04/06/10 08:58  auto_snap      Compton Polarimeter snapshot
316650 04/06/10 08:58  auto_snap      Charge Asymmetry snapshot
316649 04/06/10 08:58  auto_snap      BigBox Magnet snapshot
316648 04/06/10 08:58  auto_snap      Beam Position and Current snapshot
316647 04/06/10 08:43  ZAFAR AHMED    Target temp is increasing
316646 04/06/10 08:37  dalton         Target vacuum stops beam
316645 04/06/10 08:34  apar           End_of_Parity_Run_2665__CODA_Config=Prex
316644 04/06/10 08:31  ZAFARA AHMED   Vacuum pressure alarm
316643 04/06/10 08:24  D. Armstrong   late follow up on spot++ on Pb target
316642 04/06/10 08:21  ZAFAR AHMED    Target alarm handler red
316641 04/06/10 08:06  apar           Start_Parity_Run_2665__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
316640 04/06/10 08:03  mercado        Detector HV Adjust for Carbon
316639 04/06/10 08:01  A. Giusa       Vacuum pressure problem
316638 04/06/10 07:55  apar           End_of_Parity_Run_2664__CODA_Config=Prex
316637 04/06/10 07:26  apar           Start_Parity_Run_2664__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Thick C12
316636 04/06/10 07:20  A. Giusa       Target moved to thick Carbon
316635 04/06/10 07:11  apar           End_of_Parity_Run_2663__CODA_Config=Prex
316634 04/06/10 07:10  dalton         Quartz HV
316633 04/06/10 07:08  dalton         Quartz HV
316632 04/06/10 06:43  silwal         "old" Pb#3 runs @ 50uA
316631 04/06/10 06:42  silwal         "old" Pb#3 runs @ 50uA
316630 04/06/10 06:42  apar           Start_Parity_Run_2663__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316629 04/06/10 06:42  dalton         Changing to HWP IN
316628 04/06/10 06:41  apar           End_of_Parity_Run_2662__CODA_Config=Prex
316627 04/06/10 06:38  apar           Start_Parity_Run_2662__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316626 04/06/10 06:37  apar           End_of_Parity_Run_2661__CODA_Config=Prex
316625 04/06/10 06:07  apar           Start_Parity_Run_2661__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316624 04/06/10 06:06  dalton         RHWP to 2900 and charge feedback off
316623 04/06/10 06:05  apar           End_of_Parity_Run_2660__CODA_Config=Prex
316622 04/06/10 05:38  apar           End_of_Parity_Run_2659__CODA_Config=Prex
316621 04/06/10 05:35  apar           Start_Parity_Run_2660__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316620 04/06/10 05:04  apar           Start_Parity_Run_2659__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316619 04/06/10 05:01  apar           Start_Parity_Run_2658__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316618 04/06/10 05:00  dalton         Left Dipole lock
316617 04/06/10 04:59  apar           End_of_Parity_Run_2657__CODA_Config=Prex
316616 04/06/10 04:59  apar           Start_Parity_Run_2657__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316615 04/06/10 04:57  apar           End_of_Parity_Run_2656__CODA_Config=Prex
316614 04/06/10 04:54  apar           Start_Parity_Run_2656__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316613 04/06/10 04:52  apar           End_of_Parity_Run_2655__CODA_Config=Prex
316612 04/06/10 04:50  apar           Start_Parity_Run_2655__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316611 04/06/10 04:48  apar           End_of_Parity_Run_2654__CODA_Config=Prex
316610 04/06/10 04:40  apar           Start_Parity_Run_2654__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316609 04/06/10 04:39  apar           End_of_Parity_Run_2653__CODA_Config=Prex
316608 04/06/10 04:35  A. Giusa       Vacuum pressure Ok
316639 04/06/10 08:01  A. Giusa       Vacuum pressure problem
316607 04/06/10 04:35  apar           Start_Parity_Run_2653__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316606 04/06/10 04:31  apar           End_of_Parity_Run_2652__CODA_Config=Prex
316605 04/06/10 04:01  apar           Start_Parity_Run_2652__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316604 04/06/10 04:00  apar           End_of_Parity_Run_2651__CODA_Config=Prex
316603 04/06/10 03:44  A.Giusa        Vacuum pressure
316608 04/06/10 04:35  A. Giusa       Vacuum pressure Ok
316602 04/06/10 03:42  dalton         Halog run start bug fixed
316601 04/06/10 03:39  A. Camsonne    Compton GSO HV off
316600 04/06/10 03:30  apar           Start_Parity_Run_2651__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=off,parity_ihwp=out,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=Lead/Diamond 3 (bottom)
316599 04/06/10 03:29  apar           End_of_Parity_Run_2650__CODA_Config=Prex
316598 04/06/10 03:22  A. Camsonne    Compton rates too high in transverse setting
316597 04/06/10 03:22  apar           End_of_Parity_Run_2649__CODA_Config=Prex
316596 04/06/10 03:12  A. Giusa       Grab of target screen
316595 04/06/10 03:09  apar           End_of_Parity_Run_2648__CODA_Config=Prex
316594 04/06/10 02:56  apar           End_of_Parity_Run_2647__CODA_Config=Prex
316593 04/06/10 02:49  dalton         spot++ on Pb diamond #3
316592 04/06/10 02:49  A. Giusa       Target moved to Pb Diamond #3
316591 04/06/10 02:48  a-onl          End_of_Run_27333
316590 04/06/10 02:48  dalton         thin lead
316657  04/06/10 10:20  R. Michaels    no thin lead in beam, please !
316589 04/06/10 02:47  a-onl          Start_Run_27333,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ on Pb at 5 nA
316588 04/06/10 02:39  a-onl          End_of_Run_27332
316587 04/06/10 02:39  a-onl          End_of_Run_6633
316586 04/06/10 02:38  dalton         spot++
316590  04/06/10 02:48  dalton         thin lead
316585 04/06/10 02:37  a-onl          Start_Run_6633,Run_type=Optics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=Optics study tune Y, beam at 0,0
316583 04/06/10 02:36  a-onl          End_of_Run_27331
316582 04/06/10 02:36  a-onl          End_of_Run_6632
316581 04/06/10 02:28  a-onl          Start_Run_27331,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ on Pb at 5 nA
316580 04/06/10 02:28  a-onl          Start_Run_6632,Run_type=Optics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=Optics study tune Y, beam at 0,0
316579 04/06/10 02:28  a-onl          End_of_Run_27330
316578 04/06/10 02:27  apar           End_of_Parity_Run_2646__CODA_Config=Prex
316577 04/06/10 02:23  A. Giusa       Vacuum going Ok
316576 04/06/10 02:19  silwal         curmon changed from bcm3 to bcm1
316575 04/06/10 02:18  apar           End_of_Parity_Run_2645__CODA_Config=Prex
316574 04/06/10 02:08  silwal         PITA scan, IHWP IN, RHWP @ 2350, run # 2644
318296  04/19/10 17:14  paschke        Feedback PITA slope
316573 04/06/10 01:54  apar           End_of_Parity_Run_2644__CODA_Config=Prex
316572 04/06/10 01:47  Apar           PITA scan, IHWP out, RHWP @ 2350, slope ~ 8 ppm/V
316571 04/06/10 01:39  dalton         Left Q1 quench (tech)
316570 04/06/10 01:17  A. Giusa       Minor Alarm on Scattering Vacuum
316603 04/06/10 03:44  A.Giusa        Vacuum pressure
316569 04/06/10 01:09  apar           End_of_Parity_Run_2643__CODA_Config=Prex
316568 04/06/10 01:00  R. Michaels    re: spot at 5 nA
316567 04/06/10 00:58  auto_snap      Radiation and Ozone snapshot
316566 04/06/10 00:57  auto_snap      Hall A Tools snapshot
316565 04/06/10 00:57  auto_snap      Compton Polarimeter snapshot
316564 04/06/10 00:57  auto_snap      Charge Asymmetry snapshot
316563 04/06/10 00:57  auto_snap      BigBox Magnet snapshot
316562 04/06/10 00:57  auto_snap      Beam Position and Current snapshot
316561 04/06/10 00:54  apar           End_of_Parity_Run_2642__CODA_Config=Prex
316560 04/06/10 00:48  A. Giusa       Yellow alarm on scattering channel vaccum
316559 04/06/10 00:45  A. Giusa       Target on optics
316558 04/06/10 00:33  a-onl          End_of_Run_6631
316557 04/06/10 00:30  a-onl          Start_Run_6631,Run_type=Optics,target_type=Super-Thin C12,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=sieve,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=sieve,comment_text=Optics study tune Y, beam at 0,0
316556 04/06/10 00:30  a-onl          Start_Run_27330,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ on Pb at 5 nA
316555 04/06/10 00:27  a-onl          End_of_Run_27329
316554 04/06/10 00:25  D. Armstrong   Shift Summary - Swing shift
316553 04/06/10 00:23  adaq           Beam Time Accounting
316552 04/06/10 00:21  Armstrong      spot++ on Pb target
316568  04/06/10 01:00  R. Michaels    re: spot at 5 nA
316551 04/06/10 00:17  D. Armstrong   5nA on Pb target #3
316550 04/06/10 00:17  a-onl          Start_Run_27329,Run_type=Spot++,target_type=Lead/Diamond 3 (bottom),beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++ on Pb at 5 nA
316549 04/06/10 00:13  R. Michaels    re: rate at low current
316548 04/06/10 00:04  D. Armstrong   5 nA (?) on BeO
316549  04/06/10 00:13  R. Michaels    re: rate at low current

Monday

316547 04/05/10 23:48  a-onl          End_of_Run_27328
316546 04/05/10 23:41  D. Armstrong   go to BeO
316545 04/05/10 23:38  A. Camsonne    Compton GSO HV on at 1900 V
316544 04/05/10 23:36  Armstrong      spot++
316543 04/05/10 23:32  a-onl          Start_Run_27328,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
316542 04/05/10 23:32  a-onl          End_of_Run_27327
316541 04/05/10 23:31  a-onl          Start_Run_27327,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
316540 04/05/10 23:30  a-onl          End_of_Run_27326
316539 04/05/10 23:29  a-onl          Start_Run_27326,Run_type=Spot++,target_type=No Target, Empty,beam_e0=1.063,beam_raster=off,beam_current=1.0,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=spot++
316538 04/05/10 23:27  Sarah          Hall A General Tools Screen Snapshot
316537 04/05/10 23:22  D. Armstrong   5 uA in Hall
316536 04/05/10 23:16  D. Armstrong   Start up Pb target recover procedure
316535 04/05/10 22:35  D. Armstrong   Beam soon
316534 04/05/10 22:31  O. Glamazdin   Moller results for Spin Dance
316533 04/05/10 22:16  romanip        The BCM output is diconnected from Moller DAQ's
316531 04/05/10 21:03  D. Armstrong   Spin dance completed. Ask for controlled access
316530 04/05/10 20:22  D. Armstrong   Status update
316529 04/05/10 19:08  E.Chudakov     BCM x10 linearity
316528 04/05/10 19:01  D. Armstrong   Status update
316527 04/05/10 16:57  auto_snap      Radiation and Ozone snapshot
316526 04/05/10 16:57  auto_snap      Hall A Tools snapshot
316525 04/05/10 16:57  auto_snap      Compton Polarimeter snapshot
316524 04/05/10 16:57  auto_snap      Charge Asymmetry snapshot
316523 04/05/10 16:57  auto_snap      BigBox Magnet snapshot
316522 04/05/10 16:57  auto_snap      Beam Position and Current snapshot
316521 04/05/10 16:02  adaq           Beam Time Accounting
316520 04/05/10 16:01  Fatiha         Day shift summary
316519 04/05/10 15:45  A. Giusa       grab of target screen
316518 04/05/10 14:49  Sirish         Compton beam polarimetry
316517 04/05/10 14:45  LeRose         Alternate Tunes
316516 04/05/10 14:45  silwal         this is bcm9
316515 04/05/10 14:44  A. Camsonne    Compton eventSelection updated 
316514 04/05/10 14:14  romanip        The BCM output for the Moller DAQ's
316516  04/05/10 14:45  silwal         this is bcm9
316533  04/05/10 22:16  romanip        The BCM output is diconnected from Moller DAQ's
316513 04/05/10 13:51  O.Glamazdin    Moller magnet ioc was rebooted
316512 04/05/10 13:43  A. Camsonne    Compton GSO HV off
316511 04/05/10 13:13  Jixie          Hall A General Tools
316510 04/05/10 13:09  Jixie          test
316509 04/05/10 13:07  romanip        BCM output for Moller DAQ's
316514  04/05/10 14:14  romanip        The BCM output for the Moller DAQ's
316508 04/05/10 12:45  O.Glamazdin    Moller magnet field
316507 04/05/10 12:31  Fatiha         Spin dance going on
316506 04/05/10 12:07  apar           End_of_Parity_Run_2641__CODA_Config=Prex
316505 04/05/10 12:06  apar           Start_Parity_Run_2641__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=dithering test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316504 04/05/10 11:39  Fatiha         No beam 
316503 04/05/10 11:23  Fatiha         No beam 
316502 04/05/10 11:07  apar           End_of_Parity_Run_2639__CODA_Config=Prex
316501 04/05/10 11:06  apar           Start_Parity_Run_2639__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=dithering test,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316500 04/05/10 10:25  silwal         feedback switched from bcm2 to bcm1
316499 04/05/10 10:20  Fatiha         End of controlled access
316498 04/05/10 09:51  apar           End_of_Parity_Run_2638__CODA_Config=Prex
316497 04/05/10 09:38  R. Michaels    cleanup of /adaql*/work*
316496 04/05/10 09:30  apar           Start_Parity_Run_2638__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316495 04/05/10 09:28  apar           End_of_Parity_Run_2637__CODA_Config=Prex
316494 04/05/10 09:28  apar           End_of_Parity_Run_2637__CODA_Config=Prex
316493 04/05/10 09:24  Fatiha         Hall going to escorted access
316492 04/05/10 09:08  apar           Start_Parity_Run_2637__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316491 04/05/10 09:05  apar           Start_Parity_Run_2636__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316490 04/05/10 08:57  auto_snap      Radiation and Ozone snapshot
316489 04/05/10 08:57  auto_snap      Hall A Tools snapshot
316488 04/05/10 08:57  auto_snap      Compton Polarimeter snapshot
316487 04/05/10 08:57  auto_snap      Charge Asymmetry snapshot
316486 04/05/10 08:57  auto_snap      BigBox Magnet snapshot
316485 04/05/10 08:57  auto_snap      Beam Position and Current snapshot
316484 04/05/10 08:50  apar           Start_Parity_Run_2635__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316483 04/05/10 08:37  apar           Start_Parity_Run_2634__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316482 04/05/10 08:32  Fatiha         All magnets down 
316481 04/05/10 08:28  apar           End_of_Parity_Run_2633__CODA_Config=Prex
316480 04/05/10 08:26  pking          Owl shift summary
316479 04/05/10 08:17  apar           Start_Parity_Run_2633__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316478 04/05/10 08:16  adaq           Beam Time Accounting
316477 04/05/10 08:15  pking          Left Q1 liquid level now shows zero (Techs)
316476 04/05/10 08:12  pking          Left Q1 trip:  Trying reset proceedure from Prex op manual; didn't reset. 
316475 04/05/10 08:07  apar           End_of_Parity_Run_2632__CODA_Config=Prex
316474 04/05/10 08:06  pking          Left Q1 has dropped to zero. (Techs)
316476  04/05/10 08:12  pking          Left Q1 trip:  Trying reset proceedure from Prex op manual; didn't reset. 
316477  04/05/10 08:15  pking          Left Q1 liquid level now shows zero (Techs)
316473 04/05/10 07:47  apar           Start_Parity_Run_2632__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316472 04/05/10 07:46  apar           End_of_Parity_Run_2631__CODA_Config=Prex
316471 04/05/10 07:25  apar           Start_Parity_Run_2631__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316470 04/05/10 07:24  apar           End_of_Parity_Run_2630__CODA_Config=Prex
316469 04/05/10 07:03  apar           Start_Parity_Run_2630__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316468 04/05/10 07:02  apar           End_of_Parity_Run_2629__CODA_Config=Prex
316467 04/05/10 06:55  pking          Are the BPM wire signals normalized by integration time?
316466 04/05/10 06:46  pking          Increased beam current to 60 uA on MPS BCM
316465 04/05/10 06:43  M Friend       Compton photon beam position scans
316464 04/05/10 06:42  apar           Start_Parity_Run_2629__CODA_Config=Prex_Run_type=Production,beam_current=55,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316463 04/05/10 06:40  apar           End_of_Parity_Run_2628__CODA_Config=Prex
316462 04/05/10 06:33  apar           Start_Parity_Run_2628__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316461 04/05/10 06:21  apar           End_of_Parity_Run_2627__CODA_Config=Prex
316460 04/05/10 06:02  apar           End_of_Parity_Run_2626__CODA_Config=Prex
316459 04/05/10 06:01  apar           Start_Parity_Run_2627__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316458 04/05/10 05:46  pking          The disk /adaql3/work1 is full; prompt analyses are failing
316457 04/05/10 05:39  apar           Start_Parity_Run_2626__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316456 04/05/10 05:38  apar           End_of_Parity_Run_2625__CODA_Config=Prex
316455 04/05/10 05:36  M Friend       Compton striptool snapshot
316454 04/05/10 05:17  apar           Start_Parity_Run_2625__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316453 04/05/10 05:16  apar           End_of_Parity_Run_2624__CODA_Config=Prex
316452 04/05/10 04:55  apar           Start_Parity_Run_2624__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316451 04/05/10 04:53  apar           End_of_Parity_Run_2623__CODA_Config=Prex
316450 04/05/10 04:34  M Friend       Cavity stopped locking again
316449 04/05/10 04:33  apar           Start_Parity_Run_2623__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316448 04/05/10 04:31  apar           End_of_Parity_Run_2622__CODA_Config=Prex
316447 04/05/10 04:24  apar           Start_Parity_Run_2622__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316446 04/05/10 04:21  apar           End_of_Parity_Run_2621__CODA_Config=Prex
316445 04/05/10 04:01  apar           Start_Parity_Run_2621__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316444 04/05/10 04:00  apar           End_of_Parity_Run_2620__CODA_Config=Prex
316443 04/05/10 03:58  M Friend       Compton cavity QWP motion reboot
316442 04/05/10 03:39  apar           Start_Parity_Run_2620__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316441 04/05/10 03:28  apar           End_of_Parity_Run_2619__CODA_Config=Prex
316440 04/05/10 03:19  apar           Start_Parity_Run_2619__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316439 04/05/10 03:18  apar           End_of_Parity_Run_2618__CODA_Config=Prex
316438 04/05/10 03:03  pking          IOC se8 and se10 back in autogain
316437 04/05/10 03:02  apar           Start_Parity_Run_2618__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316436 04/05/10 03:01  pking          FFB and iocse9 settings after BCM/BPM calibration
316435 04/05/10 02:58  apar           End_of_Parity_Run_2617__CODA_Config=Prex
316434 04/05/10 02:58  silwal/pking   BCM/BPM calibration run # 2617
316433 04/05/10 02:29  apar           Start_Parity_Run_2617__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/BPM calibration,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316432 04/05/10 02:26  apar           Start_Parity_Run_2616__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/BPM calibration,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316431 04/05/10 02:24  apar           Start_Parity_Run_2615__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/BPM calibration,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316430 04/05/10 02:23  Abdurahim      Green Cavity Polarization Study
316872  04/11/10 23:35  Abdurahim      Searching for optimized DOCP state at the CIP
316429 04/05/10 02:07  apar           Start_Parity_Run_2614__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/BPM calibration,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316428 04/05/10 02:06  apar           End_of_Parity_Run_2613__CODA_Config=Prex
316427 04/05/10 02:04  pking          IOC se9 with low RF gain
316426 04/05/10 01:59  pking          IOC se8 and se10 set to "gains off"
316425 04/05/10 01:58  apar           Start_Parity_Run_2613__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/BPM calibration,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316424 04/05/10 01:56  apar           End_of_Parity_Run_2612__CODA_Config=Prex
316423 04/05/10 01:47  apar           Start_Parity_Run_2612__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=BCM/BPM calibration,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316422 04/05/10 01:44  silwal         bcm1-2 swapped
316421 04/05/10 01:40  apar           End_of_Parity_Run_2611__CODA_Config=Prex
316420 04/05/10 01:34  apar           Start_Parity_Run_2611__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316419 04/05/10 01:09  apar           End_of_Parity_Run_2610__CODA_Config=Prex
316418 04/05/10 01:08  pking          BPM12 wire signals are very low
316467  04/05/10 06:55  pking          Are the BPM wire signals normalized by integration time?
316417 04/05/10 01:03  apar           Start_Parity_Run_2610__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316416 04/05/10 01:01  apar           End_of_Parity_Run_2609__CODA_Config=Prex
316415 04/05/10 00:56  auto_snap      Radiation and Ozone snapshot
316414 04/05/10 00:56  auto_snap      Hall A Tools snapshot
316413 04/05/10 00:56  auto_snap      Compton Polarimeter snapshot
316412 04/05/10 00:56  auto_snap      Charge Asymmetry snapshot
316411 04/05/10 00:56  auto_snap      BigBox Magnet snapshot
316410 04/05/10 00:56  auto_snap      Beam Position and Current snapshot
316409 04/05/10 00:35  apar           Start_Parity_Run_2609__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316408 04/05/10 00:33  apar           End_of_Parity_Run_2608__CODA_Config=Prex
316407 04/05/10 00:13  apar           Start_Parity_Run_2608__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316406 04/05/10 00:12  apar           End_of_Parity_Run_2607__CODA_Config=Prex
316405 04/05/10 00:02  apar           Start_Parity_Run_2607__CODA_Config=Prex_Run_type=Production,beam_current=50,beam_energy=1.063,beam_polarization=0,beam_raster=on,comment_text=production,dithering_magnet=off,dithering_magnets=,leftarm_p=1.063,leftarm_theta=5,parity_feedback=on,parity_ihwp=in,rightarm_p=1.063,rightarm_theta=5,target_fanspeed=0 Hz,target_type=No Target, Empty
316404 04/05/10 00:01  adaq           Beam Time Accounting
316403 04/05/10 00:00  apar           End_of_Parity_Run_2606__CODA_Config=Prex