Docs

BigBite Timing hodoscope Technical Specifications (design and performance requirements), J. Annand et al. [[1]]
Software requirements, R. Montgomery et al. [[2]]
Original electronics plan, J. Annand et al. (describes chain from PMT to final VME readout, including high voltage and low voltage)[[3]]
Scintillator bar and light guide surface roughening tests in Glasgow 2020, R. Montgomery et al. [[4]]

High voltage and low voltage set up and operation for hodoscope in TEDf with cosmics, J. Annand et al. [[5]]

Updated mapping for cosmics running 2021 currently in preparation
High voltage and low voltage mapping up to Feb 2020 description (will remove when new mapping uploaded) [[6]]
Accompanying high voltage and low voltage mapping up to Feb 2020 excel sheet (will remove when new mapping uploaded) [[7]]

HV patch panels, J. Annand, A. Clarkson [[8]]
Schematic for LV distributor panel is found in figure 5 of "Original electronics plan" document listed in general documents above
Schematic for PMT bases is found in figure 3 of "Original electronics plan" document listed in general documents above
Schematic of NINO front end cards is found in figure 4 of "Original electronics plan" document listed in general documents above

Electron Tubes ET9124 SB type PMTs [[9]]
Eljen Technology EJ200 scintillator bars [[10]]
Eljen technology UVT acrylic light guides [[11]]
DYMAX optical cure epoxy - check which specific model number was used in Jlab repairs
Cage HV connectors at HV patch panel connections [[12]]
CAEN V792 [[13]]
CAEN V1190 [[14]]
CAEN SY1527LC HV mainframe, 19" wide, 8U [[15]]
Accessory CAEN A1932AN 48 channel HV distributer modules for mainframe [[16]]
Accessory CAEN A1531 primary PSU for HV mainframe - no specific manual online, contacted CAEN and they refer to this document [[17]]
AGILENT N5761A DC power supply unit for NINO front end cards, 19" wide, 1U, rack-mountable [[18]]
Wiener 6U VME64x 6023 crate [[19]]

Contents