Analysis resources for d2n

any

 If you need to create customized ROOT files then please make a personal directory here:
      '/work/halla/e06014/disk1/
 and direct the analyzer to use that path.

Subscribe by going following these links:

Transversity's online ELOG

 There are very few good reasons to need to copy/store root files or data files in your home directory.  
 Please leave the data files on the /cache/* disks and keep root files on the /work/halla/e06014/* file system.

 jget /mss/home/brads/e06014_adaq_directory-01Sept09.tar .

  Off Line Analysis for transversity
  A how-to on using JLab's computer farm to analyze Hall A data.  This page uses Transversity's
  paths, run numbers, etc. Be sure to use the d2n work disk for output!

 Above is the location of the raw ROOT files for the 1-pass 3He and H2 runs with BigBite set in negative polarity. These all have the cut requiring one or more tracks in the BigBite detector.

 Above is the location of the raw ROOT files for the production 4-pass 3He and N2 runs with BigBite set in negative polarity. These all have the cut requiring one or more tracks in the BigBite detector.

 Above is the location of the skimmed ROOT files for the elastic one pass H2 runs. These all have the cut requiring one or more tracks in the BigBite detector.

 Above is the location of the skimmed ROOT files for the elastic one pass 3He runs. These all have the cut requiring one or more tracks in the BigBite detector. These files use the 3He mass when computing Bjorken x and other kinematic values.

 Above is the location of the skimmed ROOT files for the elastic one pass 3He runs. These all have the cut requiring one or more tracks in the BigBite detector. These files use the proton mass when computing Bjorken x and other kinematic values.

 Above is the location of the skimmed ROOT files for the production 4-pass 3He runs with BigBite set in negative polarity. These all have the cut requiring one or more tracks in the BigBite detector.

 Above is the location of the skimmed ROOT files for the production 4-pass 3He runs with BigBite set in positive polarity. These all have the cut requiring one or more tracks in the BigBite detector.

 Above is the location of the skimmed ROOT files for the production 4-pass N2 runs with BigBite set in negative polarity. These all have the cut requiring one or more tracks in the BigBite detector.

   All of the skimmed ROOT files for the LHRS data, including <math>^{3}</math>He negative and positive polarity data and nitrogen negative and positive polarity data

 ESnet Readytalk
 Dial Toll-Free Number: 866-740-1260 (U.S.&  Canada) (International Access Numbers)
 Enter your 7-digit access code, followed by "#"
 Your access code: 2836069

Analysis resources for d2n

Contents

d2n Home Page

General Guide

d2n-analysis mailing lists

Retrieving files from the Silo/Auger

Hall A Analyzer Documentation

Offline Replay Instructions

Calendar, Run Periods

Run sheets

LHRS and Coincidence Runs

BigBite Runs

Shift Checklists

Preliminary Production Run List

Replayed ROOTfile Locations

Beam Calibrations

Beam Polarimetry

Detector Calibs

Left HRS

BigBite

Particle Identification

Left HRS

BigBite

Hall A He3 Polarized Target

Special Topics

Analysis Lessons Learned (d2n) from Transversity

Phone conference instructions for these meetings

Navigation menu

Search