Experimental Equipment Operation

• General Issues
  • Oxygen Deficiency Hazard
  • Radiation Safety and the Personnel Safety System
    • 5.1.2.2  Radiation Gates
    • 5.1.2.4  Induced Activity
    • 5.1.2.6  Radiation Control Personnel
  • Electrical Safety
    • 5.1.3.2  AC Power
    • 5.1.3.4  Grounding and Shielding
    • 5.1.3.6  DC Power
    • 5.1.3.8  Low Conductivity Water (LCW) Operations
    • 5.1.3.10  Loss of site LCW
    • 5.1.3.12  Maintenance
  • Fire Safety
• Beamline
  • Beam Transport
    • 5.2.1.2   Overview
    • 5.2.1.4   Authorized Personnel
    • 5.2.1.6   Safety procedures
    • 5.2.1.8   Machine/Beamline protection system
    • 5.2.1.10   Personnel Safety System
  • Charge Monitors
    • 5.2.2.2  Cavities current monitors system
    • 5.2.2.4  Parametric Current Transformer - Unser
    • 5.2.2.6   Authorized Personnel
    • 5.2.2.8  Standard Procedure
    • 5.2.2.10   Extended procedure
• Targets
  • Scattering Chamber
    • 5.3.1.2  Overview
    • 5.3.1.4  Target Chamber
    • 5.3.1.6  Target Chamber - Spectrometer Coupling
    • 5.3.1.8  Stress Analysis of the Middle Ring
    • 5.3.1.10  Vacuum Pumping System
  • Solid Targets
    • 5.3.2.2  Solid Target Ladder
    • 5.3.2.4  Moving Mechanism
    • 5.3.2.6  Safety Features
    • 5.3.2.8  Cooling
    • 5.3.2.10   Operating the Hall A Target Ladder
  • Waterfall Target
    • 5.3.3.2  The waterfall target
    • 5.3.3.4  The hydraulic system
    • 5.3.3.6  The gas system
    • 5.3.3.8  The movement system
    • 5.3.3.10  The slow-control system
    • 5.3.3.12  Authorized Personnel
    • 5.3.3.14  Safety Assessments
    • 5.3.3.16  Operating procedure
    • 5.3.3.18  Troubleshooting
• Spectrometers
  • Safety with Regards to the Spectrometer
  • Hall A Vacuum System
    • 5.4.2.2  Spectrometer Vacuum System
    • 5.4.2.4  Target Vacuum System
    • 5.4.2.6  Magnet Vacuum System
    • 5.4.2.8  Beam Line Vacuum System
    • 5.4.2.10  Beam Exit Vacuum System
    • 5.4.2.12  Hazards of Vacuum Systems
  • The High Resolution Spectrometer (HRS)
    • 5.4.3.2  Magnets and Power Supplies
    • 5.4.3.4  Personnel
    • 5.4.3.6  Quadrupole Magnets
    • 5.4.3.8  Cryogenic Procedures
    • 5.4.3.10  First Time Startup Check List.
    • 5.4.3.12  Dipole Magnet
  • Operation of the HRS Magnets
  • Field Monitoring
    • 5.4.5.2   Dipole Field Monitoring Electron Arm
    • 5.4.5.4  Authorized Personnel
    • 5.4.5.6  Safety Assesment
    • 5.4.5.8  NMR Operationg Procedure:
      • Hadron Dipole Field Setting Instructions:
  • Positioning and Alignment
    • 5.4.6.2  Overview
    • 5.4.6.4  Responsible Personnel
    • 5.4.6.6  Safety Assessment
    • 5.4.6.8  Operating Procedure
      • Spectrometer Rotation Procedure Overview
      • Horizontal Spectrometer Pointing Procedure
  • Calibration Slit and Collimator System
    • 5.4.7.2  Overview
    • 5.4.7.4  Authorized Personnel
    • 5.4.7.6  Safety Assessment
    • 5.4.7.8  Operating Procedure
• Detectors
  • Vertical Drift Wire Chambers
    • 5.5.1.2  Overview
    • 5.5.1.4  Operating Procedure
      • Gas Flow Operating Procedures
      • Power Supplies and Electronics Procedures
      • Power-up Procedure
    • 5.5.1.6  Handling Considerations
    • 5.5.1.8  Safety Assessment
    • 5.5.1.10  Responsible Personnel
  • Trigger Scintillators
    • 5.5.2.2  Overview
    • 5.5.2.4  Handling Considerations
      • Assembly Instructions
      • The Electronic Amplification Chain
    • 5.5.2.6   5" PMT Bases for S3 Counters
      • Assembly Instructions
      • The Electronic Amplification Chain
    • 5.5.2.8  Safety Assessment
    • 5.5.2.10  Responsible Personnel
  • Gas Cherenkov Counters
    • 5.5.3.2  Overview
    • 5.5.3.4  Gas system
    • 5.5.3.6  Construction
    • 5.5.3.8  Photomultipliers
    • 5.5.3.10  Authorized Personnel
  • Aerogel Detector
    • 5.5.4.2  Overview
    • 5.5.4.4  Responsible Personnel
    • 5.5.4.6  Safety Assessment
    • 5.5.4.8  Operating Procedure
      • Operating Voltage
    • 5.5.4.10  Handling Considerations
      • Installation and Removal of PMTs
      • Installation and Removal of the SiO₂ Tray
  • Shower Calorimeter
    • 5.5.5.2  Overview
    • 5.5.5.4  Operating Procedure
      • Power Supplies and Electronics Procedures
      • Signal Summing, Amplification and the Multiplexer
    • 5.5.5.6  Handling Considerations
    • 5.5.5.8  Safety Assessment
    • 5.5.5.10  Responsible Personnel
  • Focal Plane Polarimeter
    • 5.5.6.2  Overview
    • 5.5.6.4  Operating Procedure
      • Gas Flow Operating Procedures
      • Power Supplies and Electronics Procedures
    • 5.5.6.6  Handling Considerations
    • 5.5.6.8  Safety Assessment
    • 5.5.6.10  Responsible Personnel
  • Gas Distribution System
    • 5.5.7.2  Overview
    • 5.5.7.4  Gas Mixing Station
    • 5.5.7.6  Gas Delivery into Hall A
    • 5.5.7.8  Autherized Personnel
    • 5.5.7.10  Safety and Device Protection
    • 5.5.7.12  System Operation
    • 5.5.7.14  Troubleshooting : Things to Check
    • 5.5.7.16  Maintenance
      • Flowmeter Calibration
  • High Voltage System
    • 5.5.8.2  Safety Assesment
    • 5.5.8.4  Authorized Personnel
  • Trigger Electronics
    • 5.5.9.2  Overview
    • 5.5.9.4  Authorized Personnel - Support Personnel
    • 5.5.9.6  Safety Assessment
    • 5.5.9.8  Operating Procedure
      • Modifying the settings and single module control
      • General Information
      • Trouble Shooting
• Counting House
  • Safety issues in the Counting House
    • Electrical Hazards
    • Other Hazards
  • Authorized Personnel
  • Overview of Data Acquisition
  • Beginning of Run Checkout
  • Run Control
    • Some Frequently Asked Questions
    • Things That Can Go Wrong
  • Online Analysis, Data Checks
    • 5.6.6.2   Dataspy and Dhist
    • 5.6.6.4  Scaler Display
    • 5.6.6.6   Analysis using ESPACE
  • Terminal Servers
    • Accessing Terminal Servers with X-Terminals
  
  

  ---

  
  10/13/1997